1991 RS t-top 383 Carb 5 speed
#1
1991 RS t-top 383 Carb 5 speed
Alright time to sell the baby! Buying a house so it needs to go!
1991 White, T-top, 5 speed, Black interior. Body is good Little to No rust on body little around t-tops, floor pans are good. 3in aftermarket steel hood. Needs alittle TLC.
Was a 305 TBI Now a 383 carb 440Hp
- JE forged pistons
- Callies forged steel crankshaft
- Manley fully machined forged steel
- I- Beam connecting rods
- Speed Pro file fit plasma moly piston rings
- Computer balanced rotating assembly
- Dart Pro 1 aluminum ported & polished cylinder heads-angle plugs
- Stainless steel 2.00" intake valves
- Stainless steel 1.56" exhaust valves
- double valve springs, titanium retainers, 10 degree locks & seals
- Three angle valve job, checking of spring tensions and heights
- Competition Cams hydraulic roller camshaft
- Ported intake manifold
- Competition Cams High Tech stainless steel full roller rocker arms
- Holly 850 Double pumper with Trick kit
- Full headers with custom exhaust
Kinda the list on the motor. running to a t5 5 speed. rickmond 3.73 and posi auburn. Rims are 16" Iroc wheels tires are Ok. Breaks have not been touched so stock. This is a Project and will need alittle work tho it does run and drive. Call will pull sideways in 4th gear and runs hard. 9000 RPM Balanced and Blueprinted. There is a rattler dampener on the motor. Open to offers! In Iowa City, Iowa any questions ask!
1991 White, T-top, 5 speed, Black interior. Body is good Little to No rust on body little around t-tops, floor pans are good. 3in aftermarket steel hood. Needs alittle TLC.
Was a 305 TBI Now a 383 carb 440Hp
- JE forged pistons
- Callies forged steel crankshaft
- Manley fully machined forged steel
- I- Beam connecting rods
- Speed Pro file fit plasma moly piston rings
- Computer balanced rotating assembly
- Dart Pro 1 aluminum ported & polished cylinder heads-angle plugs
- Stainless steel 2.00" intake valves
- Stainless steel 1.56" exhaust valves
- double valve springs, titanium retainers, 10 degree locks & seals
- Three angle valve job, checking of spring tensions and heights
- Competition Cams hydraulic roller camshaft
- Ported intake manifold
- Competition Cams High Tech stainless steel full roller rocker arms
- Holly 850 Double pumper with Trick kit
- Full headers with custom exhaust
Kinda the list on the motor. running to a t5 5 speed. rickmond 3.73 and posi auburn. Rims are 16" Iroc wheels tires are Ok. Breaks have not been touched so stock. This is a Project and will need alittle work tho it does run and drive. Call will pull sideways in 4th gear and runs hard. 9000 RPM Balanced and Blueprinted. There is a rattler dampener on the motor. Open to offers! In Iowa City, Iowa any questions ask!
#2
TGO Supporter
iTrader: (2)
Join Date: Feb 2000
Location: Avatar: My 34' 1989 Scarab III w/ twin 454's (502's Started!)
Posts: 1,235
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1989 Wellcraft Scarab III
Engine: Twin 454's
Axle/Gears: Twin Mercruiser Bravo I's
Re: 1991 RS t-top 383 Carb 5 speed
Per board rules please post an asking price.
Alright time to sell the baby! Buying a house so it needs to go!
1991 White, T-top, 5 speed, Black interior. Body is good Little to No rust on body little around t-tops, floor pans are good. 3in aftermarket steel hood. Needs alittle TLC.
Was a 305 TBI Now a 383 carb 440Hp
- JE forged pistons
- Callies forged steel crankshaft
- Manley fully machined forged steel
- I- Beam connecting rods
- Speed Pro file fit plasma moly piston rings
- Computer balanced rotating assembly
- Dart Pro 1 aluminum ported & polished cylinder heads-angle plugs
- Stainless steel 2.00" intake valves
- Stainless steel 1.56" exhaust valves
- double valve springs, titanium retainers, 10 degree locks & seals
- Three angle valve job, checking of spring tensions and heights
- Competition Cams hydraulic roller camshaft
- Ported intake manifold
- Competition Cams High Tech stainless steel full roller rocker arms
- Holly 850 Double pumper with Trick kit
- Full headers with custom exhaust
Kinda the list on the motor. running to a t5 5 speed. rickmond 3.73 and posi auburn. Rims are 16" Iroc wheels tires are Ok. Breaks have not been touched so stock. This is a Project and will need alittle work tho it does run and drive. Call will pull sideways in 4th gear and runs hard. 9000 RPM Balanced and Blueprinted. There is a rattler dampener on the motor. Open to offers! In Iowa City, Iowa any questions ask!
Attachment 234193
Attachment 234194
1991 White, T-top, 5 speed, Black interior. Body is good Little to No rust on body little around t-tops, floor pans are good. 3in aftermarket steel hood. Needs alittle TLC.
Was a 305 TBI Now a 383 carb 440Hp
- JE forged pistons
- Callies forged steel crankshaft
- Manley fully machined forged steel
- I- Beam connecting rods
- Speed Pro file fit plasma moly piston rings
- Computer balanced rotating assembly
- Dart Pro 1 aluminum ported & polished cylinder heads-angle plugs
- Stainless steel 2.00" intake valves
- Stainless steel 1.56" exhaust valves
- double valve springs, titanium retainers, 10 degree locks & seals
- Three angle valve job, checking of spring tensions and heights
- Competition Cams hydraulic roller camshaft
- Ported intake manifold
- Competition Cams High Tech stainless steel full roller rocker arms
- Holly 850 Double pumper with Trick kit
- Full headers with custom exhaust
Kinda the list on the motor. running to a t5 5 speed. rickmond 3.73 and posi auburn. Rims are 16" Iroc wheels tires are Ok. Breaks have not been touched so stock. This is a Project and will need alittle work tho it does run and drive. Call will pull sideways in 4th gear and runs hard. 9000 RPM Balanced and Blueprinted. There is a rattler dampener on the motor. Open to offers! In Iowa City, Iowa any questions ask!
Attachment 234193
Attachment 234194
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
Zachattack0925
Tech / General Engine
2
08-12-2015 09:54 PM
Zachattack0925
Transmissions and Drivetrain
4
08-12-2015 09:52 PM