6cyl92CamaroRS

Ok im sorry i caused such a problem before it was my intent at all. Someone told me when i asked a previous question they said "Put boomin boys name in your subject he shoudl beabel to answer it" so i did I didnt realize it would cause a problem so im sorry for doing that. And also i know i dont know anything about this type of things, thank you for reminding me

Ok so the real problem here. Ok im sure most of you read the other post and know whats going on im retarded and cant get this thing together. I have a bazooka EL1500 its 500W 1-channel. Im guessing that means only 1 spot to hook up speakers. And i have 2 12" EL 1204 they are 4 ohm. I have them hooked up +from amp to + 1st speaker then from +of 1st speaker to - of 2nd speaker and opposit for the other speaker. Is this wrong, from what i read i believe it is. And also there is no wire hanging off my head unit to put my REM cord into so i was wondering if anyone could let me know how to fix that up. Thankyou
Mitchell

Zerstörer

I don't think it was you that caused a problem, but kids posting unless info and trying to cause problems.

It sounds like you have them hooked in series right now. If your amp is 2 ohm stable, you should hook up the positive of both subs to the positive on the amp, then hook the negatives of both subs to the negative of the amp to make a parallel circuit.

HTH!!

6cyl92CamaroRS

Ok how do i know if they are 2 ohm compatiable all i know is they say 4 ohm on the back. Sorry to sound so stupid but tahts all i know?


I just red up on my speakers and it says they can handld 4 or 8 ohms? whats that meant

Zerstörer

The manual or box the amp came in will say.

6cyl92CamaroRS

Yea i checked it out it says it can handle either 4 or 8 ohms, im not sure what that means but how should i hook up my speakers from 1 speaker output from the amp thanks
Mitchell

Boomin Boy

that amp is 2 ohm stable so to run a 2 ohm load with (2) 4 ohm subs you will want to wire them in parallel. In other words, connect the positives from both speakers to the positive on the amp, an then both speaker negatives to the negative on the amp.

6cyl92CamaroRS

how do you know that my amp can handle 2 ohm? are you sure it does, and also can my amp handle 2 4 ohm speakers???

Also where do i hook up my rem wire if i dont have a wire hanging off my head unit they all go inot the black hose?

Mitchell

Zerstörer

You amp does not care how many speakers there are, only the combined ohm load.

Do you have a power antenna wire?? Some times you can use that as the remote wire.

6cyl92CamaroRS

I have no antena at all, i guess when my bro wrecked it in 97 the antenna was lost in the carnage. So i have no idea, can i hook it up on the fuse box in the ign slot???
Thanks
Mitchell

br()bert

Look on the back of your head unit at the wires coming out. Their should be a wire thats label says power ant etc. OR if you have a multimeter you can turn the headunit on and check the wires. It shouldnt be too hard to find. I have an old poineer head unit laying around and on this the remote turn on wire(power ant wire same thing) is blue with a white stripe.

6cyl92CamaroRS

I have 2 wires that are blue with a white stripe. One is dark blue and the other is light blue, both with a white stripe. Just wondering which one to use thanks Mitchell.

AJ_92RS

More than likely it's the dark blue, but there's nothing wrong with trying them both.

I can promise that it's either one of those.

Boomin Boy

i looked up the specs
http://www.mobilcaraudio.com/catalog...7999/73645.htm

6cyl92CamaroRS

Thanks for looking that up boomin. Now with that type of amp and 2 4ohm speakers what kind of wire setup should i do the parallel one you guys were talking about. + from amp to + in both speakers and - from amp to - in both speakers
when im hooking up the wires are there going to be 4 wires coming from the amp sending 2 wires to each speaker?

thanks AJ ill just try both one of them has got to work.
thanks
Mitch

br()bert

http://www.infinitysystems.com/caraudio/3-4-2.aspx


here ya go man, almost any wire config you can think of

AJ_92RS

"Most excellent, dude." :rockon:

6cyl92CamaroRS

Thats an awsome website but what setup am I looking for? I have no idea what that stuff means its like reading german (which i took 2 years of and passed my 1%) so im not very good at it.
Thanks Mitch

br()bert

http://www.infinitysystems.com/caraudio/2-4-2.aspx this one dude

Screamin'87GTA

Relax 6cyl, there are plenty of us who do this everyday!

Some people are a keg of information waiting to be tapped..
some people just feel bad for others
We all started somewhere


Woo hoo 100