Is there a Delco CD indash that will fit a 1984 Trans Am
#1
Junior Member
Thread Starter
Join Date: Jul 2009
Location: West Virginia
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: 5.0 Litre H.O Modified
Transmission: 5 Speed Manual
Axle/Gears: 3.73 Limited Slip Posi-Trac
Is there a Delco CD indash that will fit a 1984 Trans Am
I have a 1984 Trans Am. The stock indash is nice. I want to keep the stock look. I was wondering if an indash with a CD deck would fit from a later Model. I don't want to alter the dash.I am an electronics technician with an a associates degree in Electronics Techology. So wiring isn't a real big deal.
Last edited by armdale; 07-03-2009 at 12:35 PM. Reason: typo
#2
Senior Member
Join Date: May 2008
Location: London, Ont, Canada
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T-Top GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
Is the stock deck (am/fm, casette) on that year a large deck or a short deck?
#3
Senior Member
Join Date: May 2008
Location: London, Ont, Canada
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T-Top GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
My 87 GTA had a large deck (4 inchs tall and about 6 in wide), you should take a look at 4th gen decks going in to 3rd gens. I did that last summer with a 1999 cd deck from a grand prix, Looks great.......looks stock.....and fits in nicelly.
Last edited by y84pauloflondon; 08-01-2009 at 12:20 AM.
#4
Junior Member
Thread Starter
Join Date: Jul 2009
Location: West Virginia
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: 5.0 Litre H.O Modified
Transmission: 5 Speed Manual
Axle/Gears: 3.73 Limited Slip Posi-Trac
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
It Is about 3 in by 6 in and both controll buttons are on the left.
#5
Junior Member
Thread Starter
Join Date: Jul 2009
Location: West Virginia
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: 5.0 Litre H.O Modified
Transmission: 5 Speed Manual
Axle/Gears: 3.73 Limited Slip Posi-Trac
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
#7
Supreme Member
iTrader: (101)
Join Date: Feb 2004
Location: Levittown Pa
Posts: 1,914
Likes: 0
Received 19 Likes
on
17 Posts
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
Just about any delco cd player from 1990-2002 will work for you.Some have different dog ear mounts welded on which you would just have to alter the mounting holes.That would be hidden so its no big deal.Other than that and the change of wiring pigtails you should be good to go.I have early 1990`s Buick cd players in both of my irocs.Looks like it came from the factory with it
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Jul 2009
Location: West Virginia
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: 5.0 Litre H.O Modified
Transmission: 5 Speed Manual
Axle/Gears: 3.73 Limited Slip Posi-Trac
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
Definately looks sweet!! Thanks so much.
#9
Senior Member
Join Date: May 2008
Location: London, Ont, Canada
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T-Top GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
And another thing too, the gm line up all have there own interier colours, (Pontiac Red- orange, Chevy Green,........etc.) Your 84 pontiac should have red, orange, yellow instruments, gage needles etc. So try to get a PONTIAC CD player.... at night when you turn on your headlight your deck lights and gages will MATCH....some details make a BIG difference...... good luck...GTA Paul!
#10
Senior Member
Join Date: May 2008
Location: London, Ont, Canada
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T-Top GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
So look for decks out of pontiacs, all decks are about the same. Some have cd with a 7 band equelizer, some without eq. some without cd just fm/am cassette. But all pontiacs have the Same colour (red- orange) display lights inside them. So instulling a deck from chev will light up Green (ex. Clock, station present butten, etc.) There's thread about 4th gen radios going into 3rd cars, so go at the top of THIS page hit search and type "4th gen decks on 3rd gen cars"... good luck....GTA Paul!
Last edited by y84pauloflondon; 07-03-2009 at 03:20 PM.
#11
Junior Member
Thread Starter
Join Date: Jul 2009
Location: West Virginia
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: 5.0 Litre H.O Modified
Transmission: 5 Speed Manual
Axle/Gears: 3.73 Limited Slip Posi-Trac
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
I can feel the wind in my hair and some Judas Priest crankin. No more beer filled cassettes to make me say really unprintable words.
x a million
x a million
Last edited by armdale; 07-03-2009 at 03:44 PM. Reason: typo
#12
Member
Join Date: Apr 2008
Location: York, Pa
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 olympic edition camaro
Engine: 2.8
Transmission: 700r4
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
Dose anybody have a pic of the pigtail needed to do this conversion? I picked up a 98 pontiac cd player at a swap meet and I got the harnest from the junkyard today and no matter which way I wired it I couln't get the screen to light up although it would take in cd's and the controlls lit up.
#13
Senior Member
Join Date: May 2008
Location: London, Ont, Canada
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T-Top GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
Dose anybody have a pic of the pigtail needed to do this conversion? I picked up a 98 pontiac cd player at a swap meet and I got the harnest from the junkyard today and no matter which way I wired it I couln't get the screen to light up although it would take in cd's and the controlls lit up.
#14
Member
Join Date: Apr 2008
Location: York, Pa
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 olympic edition camaro
Engine: 2.8
Transmission: 700r4
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
When I hooked mine the issue I had was the power antenna wire (99 Grand prix don't have power antenna's). My buddy has a 03 Grand Prix and his back light burnt out this past fall, maybe yours is too. Dealers can still order these LITTLE lights, $4.00 CDN, easy to replace....Try that it sounds like that is your problem.
#15
Senior Member
Join Date: May 2008
Location: London, Ont, Canada
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T-Top GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
Well 8 wires are for your speakers, funny thing is the wire colours matched mine(speakers). And I think that there 3 others, 1 main power, 1 ground, 1 ignition power. I picked up a wiring harnest that links your old stock pigtail to your new stock deck, to avoid the guess work. $12.00 CDN. Most audio shops should have them (GM harnest very common).
#16
Senior Member
Join Date: May 2008
Location: London, Ont, Canada
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T-Top GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
All wires were used, I just wished i had pix to show you....
#17
Member
Join Date: Apr 2008
Location: York, Pa
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 olympic edition camaro
Engine: 2.8
Transmission: 700r4
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
I found the ground wire and the ignition power but I'll probably just go and buy the harnest to save the mess. Thanks
#18
Senior Member
Join Date: May 2008
Location: London, Ont, Canada
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T-Top GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
#19
Member
Join Date: Jul 2006
Location: West Palm Beach, FL
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Pontiac Firebird S/E
Engine: 305 carb'd V8
Transmission: 4-speed auto
Axle/Gears: Stock
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
Looks like the Delco CD player from a C5 Corvette will fit as well.
#20
Senior Member
Join Date: May 2008
Location: London, Ont, Canada
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T-Top GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.27
#21
Member
Join Date: Jul 2006
Location: West Palm Beach, FL
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Pontiac Firebird S/E
Engine: 305 carb'd V8
Transmission: 4-speed auto
Axle/Gears: Stock
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
No, that's what I got inside my C5! But I remember quite well the factory radio inside the thirdgen and considering how GM tends to stick with the same dimensions for quite some time, they look about the same size.
The difference being the CD player from the C5 doesn't have the graphic equalizer like the old Delco tape deck had in my thirdgen. If you want, measure the dimensions of the radio you have and I'll measure the one in my C5 and let you know if they are the same.
The difference being the CD player from the C5 doesn't have the graphic equalizer like the old Delco tape deck had in my thirdgen. If you want, measure the dimensions of the radio you have and I'll measure the one in my C5 and let you know if they are the same.
#22
Senior Member
Join Date: May 2008
Location: London, Ont, Canada
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T-Top GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
my 99 grand prix deck is about 3 1/2" X 7 3/4" with in the face plate. And you could add on 1/4 to those measurments, that's what the face bracket is hiding
#23
Senior Member
Join Date: May 2008
Location: London, Ont, Canada
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T-Top GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
BTW my old man got a 03 50th ann. C5.... a real fun ride.
#24
Supreme Member
iTrader: (4)
Join Date: Mar 2009
Location: Pepperell, MA
Posts: 3,079
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1987 Trans Am
Engine: LQ9/L92
Transmission: 4L60E
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
The deck thats going into my 87 TA is the stock unit I pulled out of my 97 Grand Prix. If your third gen is older than 89, you will have to get the newer style wiring harness, but most junkyards will let you have em for under $5. You may have to do some modding to the mounting brackets, but it will fit in otherwise with no issue and match the interior pretty well.
#25
Senior Member
Join Date: May 2008
Location: London, Ont, Canada
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T-Top GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
The deck thats going into my 87 TA is the stock unit I pulled out of my 97 Grand Prix. If your third gen is older than 89, you will have to get the newer style wiring harness, but most junkyards will let you have em for under $5. You may have to do some modding to the mounting brackets, but it will fit in otherwise with no issue and match the interior pretty well.
Last edited by y84pauloflondon; 08-01-2009 at 12:22 AM.
#26
Supreme Member
Join Date: Jan 2002
Posts: 1,122
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1984 Trans Am 15th anniversary
Engine: L69
Transmission: 700r
Axle/Gears: 3:73
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
A little tip for those who don't want to butcher there 89 and older stereo plug. GM made from factory an adapter in cavalier's that had the older connector on one and and the newer GM connector on the other end , look in 90ish cavalier and you will find it behind the dash , it actually unplugs like something aftermarket.
I see these pontiac decks so cheap , i can get a monsoon deck right now for $20 but I am not 100% sure if they will work
any ideas? I looked at the harness in the yard and it seems to have all of the colors mine does. The main problem being is I hear it communicates with the car its taken from. Problem being is I cannot find anyone who has tried to power it up in a older car. Right now im sporting a factory pontiac deck with EQ , audiobauhn speakers in the rear and pioneers in the front , sounds really good and loud.
I see these pontiac decks so cheap , i can get a monsoon deck right now for $20 but I am not 100% sure if they will work
any ideas? I looked at the harness in the yard and it seems to have all of the colors mine does. The main problem being is I hear it communicates with the car its taken from. Problem being is I cannot find anyone who has tried to power it up in a older car. Right now im sporting a factory pontiac deck with EQ , audiobauhn speakers in the rear and pioneers in the front , sounds really good and loud.
Last edited by The_Wraith; 08-02-2009 at 03:30 PM.
#28
Senior Member
Join Date: May 2008
Location: London, Ont, Canada
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T-Top GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: Is there a Delco CD indash that will fit a 1984 Trans Am
1A Dan no worries.....
The_Warth, cool info on the cavilier harness. The only thing I've heard about the monsoon decks (which is awsome if you got it, thumbs up) is that the car it came from needs it hooked to run/drive, it works with THAT car computer somehow.....But as far as I know it SHOULD work just fine in YOUR car, your cars computer is DOES NOT depend on it. For $20 I would go for it.....Monsoons are NOT cheap in Canada, wish I had one, GOOD LUCK!
The_Warth, cool info on the cavilier harness. The only thing I've heard about the monsoon decks (which is awsome if you got it, thumbs up) is that the car it came from needs it hooked to run/drive, it works with THAT car computer somehow.....But as far as I know it SHOULD work just fine in YOUR car, your cars computer is DOES NOT depend on it. For $20 I would go for it.....Monsoons are NOT cheap in Canada, wish I had one, GOOD LUCK!
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
03-08-2019 12:21 PM
I'llrocya
Interior Parts for Sale
3
02-02-2016 11:43 PM
sailtexas186548
Engine/Drivetrain/Suspension Parts for Sale
8
01-19-2016 12:21 PM