Double Din Radio Bezel
#301
Supreme Member
iTrader: (1)
Join Date: Feb 2003
Location: Austin, Tx
Posts: 1,494
Received 57 Likes
on
42 Posts
Car: 91 Z28
Engine: LS1
Transmission: T-56
Axle/Gears: 3.73 Hawks 8.8
Re: Double Din Radio Bezel
Can't wait to see the final product after the molds are done! I can tell the 3d printed face place I had made will get brittle around the screw holes after only taking it off twice.
#302
Senior Member
Re: Double Din Radio Bezel
Whatever though, I'm just thankful for you and your efforts pursuing this!
The following users liked this post:
DynoDave43 (01-24-2021)
#304
Supreme Member
iTrader: (3)
#306
Member
Re: Double Din Radio Bezel
***Big Update***
So here is where I'm at. parts are coming out decent. I'm having an issue with incomplete parts getting made. ill be working to resolve this issue. But other than that texture and size look good.
part corner
texture
failed part
ill post back when more progress has been made.
-7thDA-
So here is where I'm at. parts are coming out decent. I'm having an issue with incomplete parts getting made. ill be working to resolve this issue. But other than that texture and size look good.
part corner
texture
failed part
ill post back when more progress has been made.
-7thDA-
#308
Member
Re: Double Din Radio Bezel
*** Reverse 2 Din Plates are good to go ***
Let me know what you guys think.
for those interested, it will be $70 shipped within the continental US. PM me if interested.
-7DA-
Let me know what you guys think.
for those interested, it will be $70 shipped within the continental US. PM me if interested.
-7DA-
Last edited by 7thdarkangel; 03-09-2021 at 04:14 PM.
The following users liked this post:
7thdarkangel (03-13-2021)
#311
Member
Re: Double Din Radio Bezel
I put up a listing on ebay for those that are interested.
https://www.ebay.com/itm/174681535586
This gives me the best shipping prices and helps keep thing organized on my end.
Thanks,
-7DA-
https://www.ebay.com/itm/174681535586
This gives me the best shipping prices and helps keep thing organized on my end.
Thanks,
-7DA-
#312
Member
Re: Double Din Radio Bezel
purchased. Now to find a radio.
Any suggestions. Have been out of the car audio for over 20 years. I miss the IASCA days.
Any suggestions. Have been out of the car audio for over 20 years. I miss the IASCA days.
#313
Junior Member
Join Date: Dec 2020
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 305 TBI
Re: Double Din Radio Bezel
Thanks for your persistence 7thdarkangel. Purchased one and looking forward to getting it installed.
If you decide later to do the OEM size slot for the radio I will purchase one of those also.
If you decide later to do the OEM size slot for the radio I will purchase one of those also.
#314
Junior Member
Join Date: Jul 2009
Location: Around, IN
Posts: 76
Received 0 Likes
on
0 Posts
Car: 92 RS/97 K3500/07 ISS
Engine: LT1/454/LS4
Transmission: 4L60E/4L80E/4T65E-HD
Axle/Gears: 2.73/4.10/3.29
Re: Double Din Radio Bezel
Got mine ordered too. Who knows when I'll get far enough on the car to do anything with it, but it'll be there on my shelf of parts waiting when I do
It's an older model now, but several of the guys in my truck group ended up with the pioneer avh-4200 after one person got one & we rode in his truck. I have one that's been in 2 different DD's with the original intent of it eventually ending up in my third gen. I'll probably go with a newer version now, mainly for the wireless android auto, but also because I don't intend to get rid of the current DD. Whatever you end up with I highly recommend getting one with android auto or apple carplay.
It's an older model now, but several of the guys in my truck group ended up with the pioneer avh-4200 after one person got one & we rode in his truck. I have one that's been in 2 different DD's with the original intent of it eventually ending up in my third gen. I'll probably go with a newer version now, mainly for the wireless android auto, but also because I don't intend to get rid of the current DD. Whatever you end up with I highly recommend getting one with android auto or apple carplay.
#315
Senior Member
Re: Double Din Radio Bezel
#317
Supreme Member
iTrader: (9)
Re: Double Din Radio Bezel
Last time I was messing around with HVAC controls on my 91, the electrical harness and vacuum harness were not long enough to move the entire assembly to the bottom. I may revisit this again when the weather breaks here. Its been over 5 years since I messed with it.
The following users liked this post:
Chopski (03-15-2021)
#319
Member
#320
Supreme Member
iTrader: (1)
Join Date: Feb 2003
Location: Austin, Tx
Posts: 1,494
Received 57 Likes
on
42 Posts
Car: 91 Z28
Engine: LS1
Transmission: T-56
Axle/Gears: 3.73 Hawks 8.8
Re: Double Din Radio Bezel
I had the top version printed myself awhile back but after taking it in and out of the car a few times now its about destroyed. I was hoping to get an official version from this thread, but its sounding like maybe not...
#321
Member
Re: Double Din Radio Bezel
If there is enough interest in the standard hvac 2 din plate, I could have parts ready in about two weeks or so. (I have a backlog of parts going in and out of the cnc right now.)
I tried the A/C on the bottom and my Pioneer radio is to long for it to work properly.
I had the top version printed myself awhile back but after taking it in and out of the car a few times now its about destroyed. I was hoping to get an official version from this thread, but its sounding like maybe not...
I had the top version printed myself awhile back but after taking it in and out of the car a few times now its about destroyed. I was hoping to get an official version from this thread, but its sounding like maybe not...
#322
Senior Member
Re: Double Din Radio Bezel
Already bought one of your current plates, but I'd be interested in one of those just so I can have options when it's time to install my new system.
#326
Member
Re: Double Din Radio Bezel
More reverse are listed.
https://www.ebay.com/sch/darkangel7t...1&_ipg=&_from=
Ill start scheduling the standard hvac 2 din plate in.
https://www.ebay.com/sch/darkangel7t...1&_ipg=&_from=
Ill start scheduling the standard hvac 2 din plate in.
The following users liked this post:
Camaro87Z (03-17-2021)
#327
Supreme Member
iTrader: (1)
Join Date: Feb 2003
Location: Austin, Tx
Posts: 1,494
Received 57 Likes
on
42 Posts
Car: 91 Z28
Engine: LS1
Transmission: T-56
Axle/Gears: 3.73 Hawks 8.8
Re: Double Din Radio Bezel
More reverse are listed.
https://www.ebay.com/sch/darkangel7t...1&_ipg=&_from=
Ill start scheduling the standard hvac 2 din plate in.
https://www.ebay.com/sch/darkangel7t...1&_ipg=&_from=
Ill start scheduling the standard hvac 2 din plate in.
#328
Junior Member
Join Date: Jan 2002
Location: Mountains of CO
Posts: 7
Received 0 Likes
on
0 Posts
Car: 1988 IROC-Z & 1992 Z-28
Engine: 305ci V8 TPI
Transmission: T-5
Re: Double Din Radio Bezel
Ordered!! You rock, dude!!! I'm doing a restomod on my 92 Z28 and this is how I'm kicking it off. I'm excited!
#329
Junior Member
Join Date: May 2010
Location: Deposit, New York
Posts: 36
Received 0 Likes
on
0 Posts
Car: '91 Camaro Z28
Engine: 305 TPI Mildly Modified
Transmission: 700R4 Stock
Re: Double Din Radio Bezel
I would like to order one also. The ebay link had 0 items listed...is there an updated link where I can check out and buy your product?
#330
Member
Re: Double Din Radio Bezel
This will be the last batch of the reverse plate until i remold (mold expired this weekend).
Also the standard 2 din is in the works.
-7DA-
The following users liked this post:
JNRSingh (04-06-2021)
#331
Member
Re: Double Din Radio Bezel
All Future part listings will be located here: https://www.unleaded-designs.com/
I have made a website of the recommendation of a few members on the board as well as some of my colleges. I'm using this site to collectively display/offer the many things I'm currently doing as a word of mouth thing.
-7DA-
I have made a website of the recommendation of a few members on the board as well as some of my colleges. I'm using this site to collectively display/offer the many things I'm currently doing as a word of mouth thing.
-7DA-
The following users liked this post:
Chopski (04-10-2021)
#332
Re: Double Din Radio Bezel
Dark thank for you work i will be buying a standard when you get them up for sale.
The following users liked this post:
7thdarkangel (04-18-2021)
#333
Member
Re: Double Din Radio Bezel
Reverse Bezel is back in stock.
I'm planing on having the Standard Position Bezel ready and available by the end of the month.
Also working on my own version of the cup holders.
https://www.unleaded-designs.com/pro...in-radio-bezel
-7DA-
I'm planing on having the Standard Position Bezel ready and available by the end of the month.
Also working on my own version of the cup holders.
https://www.unleaded-designs.com/pro...in-radio-bezel
-7DA-
#334
Supreme Member
iTrader: (1)
Join Date: Feb 2003
Location: Austin, Tx
Posts: 1,494
Received 57 Likes
on
42 Posts
Car: 91 Z28
Engine: LS1
Transmission: T-56
Axle/Gears: 3.73 Hawks 8.8
Re: Double Din Radio Bezel
Got my reverse in. Looks good, but there are some what look like fingerprints all over it which appear to not come off with cleaning. I will be buying the standard version next week when it comes out, but I sure hope these fingerprints arent on the next one since that is what is going in the car.
#335
Member
Re: Double Din Radio Bezel
Got my reverse in. Looks good, but there are some what look like fingerprints all over it which appear to not come off with cleaning. I will be buying the standard version next week when it comes out, but I sure hope these fingerprints arent on the next one since that is what is going in the car.
The marks look like mold release still on the part. It should come off with a mild dish soap.
Ill look into fitting them in the ultrasonic prior to going out to make sure this doesn't continue.
Ill also double check with the supplier on that material lot.
Thanks for the review.
#336
Supreme Member
iTrader: (1)
Join Date: Feb 2003
Location: Austin, Tx
Posts: 1,494
Received 57 Likes
on
42 Posts
Car: 91 Z28
Engine: LS1
Transmission: T-56
Axle/Gears: 3.73 Hawks 8.8
Re: Double Din Radio Bezel
I'll try something a little stronger than Interior cleaner and see if it comes off, I wasn't sure if it was something in the plastic so I was giving it time to dry. Overall the quality is really good, and it appears to be stronger than the pretty expensive 3d print I got. Can't wait to test fit the radio again and see if I can pull it off. Probably not, my radio is super long
#337
Member
Re: Double Din Radio Bezel
Standard double din plate are going to be running later than expected. Fried my 3d print and am now waiting on parts to show up to fix it. Once he parts come in it will only be a few days until they would be ready.
Thanks again.
Thanks again.
#338
Member
Re: Double Din Radio Bezel
Thanks for all the effort developing this.
Mike
#339
Member
Re: Double Din Radio Bezel
I'm a little late to this party but I would like to get two(2) of the standard double din plates when you are back in production. I saw only the reverse listed on your Unleaded site. Is there an official way to place my order or is this forum post where I start?
Thanks for all the effort developing this.
Mike
Thanks for all the effort developing this.
Mike
Thanks
#340
Member
Re: Double Din Radio Bezel
Just placed order for two of the reverse plates as well. I want to have all options open when I attempt DD install. While I am waiting for your manufacturing stream to resume I will do some shopping for a new device. I read a huge chunk of this thread last night till I got too bleary eyed. I remember there were some caveats regarding front bezel size fitment with the opening of early design plates. Up to what what size does the reverse and standard plates fit around?
Thanks,
Mike
Thanks,
Mike
#341
Member
Re: Double Din Radio Bezel
Just placed order for two of the reverse plates as well. I want to have all options open when I attempt DD install. While I am waiting for your manufacturing stream to resume I will do some shopping for a new device. I read a huge chunk of this thread last night till I got too bleary eyed. I remember there were some caveats regarding front bezel size fitment with the opening of early design plates. Up to what what size does the reverse and standard plates fit around?
Thanks,
Mike
Thanks,
Mike
The opening on the plates measure 4.00 x 7.06(just added this to the site). Should fit most of the non standard Chinese units this way. The metro kit(standard opening) i had bought for my truck had to be shaved to fit the non standard size head unit used in the install guide(no modifications where needed to fit the camaro bezel).
#342
Member
Re: Double Din Radio Bezel
Received the reverse plates a day or so ago. I am impressed for somebody that is not working with a GM corporate budget. Very good quality.
Mike
Mike
The following users liked this post:
7thdarkangel (06-01-2021)
#343
Member
Re: Double Din Radio Bezel
Hoping to have parts being made for the week end. really close. just have a some corners giving me a hard time.
The following users liked this post:
bluegrassz (06-02-2021)
#344
TGO Supporter
Re: Double Din Radio Bezel
How difficult would it be for you to leave the heater control panel blank (solid) for Vintage Air controls? I need that and the cup holder/ manual shift plate console cover.
#345
Member
Re: Double Din Radio Bezel
As for the cup holder, if you are looking for just the astray section ill be offering that soon. the prototype I'm working on is coming along very well. if you are looking for a complete one piece shift plate, it will be a little bit on those. i have a decent amount more R&D work to do on them as well as how complete I'm going to offer them.
i post project updates on the Unleaded Designs facebook page if you want to keep an eye out. Once things are ready ill post around the forum as well.
-7thDA-
The following users liked this post:
86gn (06-03-2021)
#346
Member
Re: Double Din Radio Bezel
Well finally got the corners straightened out. The standard orientation radio plates and ashtray cup holders will be available by the end of the month. Just need to finish up the tooling on the radio plate and a quick install write up on both. Thanks for bearing with me.
Next I'm going to finish up an option for a complete shift plate made to order both standard and auto, reproduction manual metal boot ring, (I'll make a different thread for those) and possibly a 85-92 firebird radio plate.
Next I'm going to finish up an option for a complete shift plate made to order both standard and auto, reproduction manual metal boot ring, (I'll make a different thread for those) and possibly a 85-92 firebird radio plate.
#347
Member
Re: Double Din Radio Bezel
Cool! Thanks for going the distance for us on the radio plates.
M
M
The following users liked this post:
7thdarkangel (07-16-2021)
The following users liked this post:
7thdarkangel (07-16-2021)
#349
Re: Double Din Radio Bezel
Thanks 7thdarkangel I just ordered a reverse from you on ebay. don't yet have the Iroc but should be picking it up tomorrow.
Will likely be taking the car on the Hot Rod Power Tour and couldn't imagine going without some phone integration and a touchscreen.
Will likely be taking the car on the Hot Rod Power Tour and couldn't imagine going without some phone integration and a touchscreen.
The following users liked this post:
7thdarkangel (07-16-2021)