what year carb will direct fit a 1986 LG4?
#1
Member
Thread Starter
Join Date: Feb 2008
Location: Central NC (NC/VA line)
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Car: Sold: 1986 Z28 Black/Silver
Engine: LG4
Transmission: 5 spd
what year carb will direct fit a 1986 LG4?
so i got the car running well and then stripped the fuel lines thread that lead into the carb!
looking at replacing the carb from a used one on ebay.
What year camaro carbs are a direct fit on a 1986?
Car is totally stock.
looking at replacing the carb from a used one on ebay.
What year camaro carbs are a direct fit on a 1986?
Car is totally stock.
#2
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,117
Received 1,688 Likes
on
1,283 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: what year carb will direct fit a 1986 LG4?
Ouch....
About 82-87. Ones from a Monte Carlo or a Caprice will also fit.
About 82-87. Ones from a Monte Carlo or a Caprice will also fit.
#3
Supreme Member
iTrader: (1)
Join Date: Jul 2004
Location: Calgary, AB, Canada
Posts: 10,763
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1982 Trans-Am
Engine: 355 w/ ported 416s
Transmission: T10, hurst shifter
Axle/Gears: 10 bolt, true-trac, 3.73
Re: what year carb will direct fit a 1986 LG4?
Did you strip the fuel threads going into the fuel filter adapter, or from the fuel filter part into the carb itself?
ie. can you just replace the fuel filter socket part? If so, use the five finger discount at the local JY and just grab that part.
ie. can you just replace the fuel filter socket part? If so, use the five finger discount at the local JY and just grab that part.
#4
Supreme Member
iTrader: (7)
Join Date: May 2004
Location: Lexington, SC
Posts: 5,291
Likes: 0
Received 58 Likes
on
52 Posts
Car: 1987 SC/1985 TA
Engine: 350/vortec/fitech
Transmission: T56
Axle/Gears: 3.27 9-bolt
Re: what year carb will direct fit a 1986 LG4?
If you've stripped the threads in the carb body you can pick up a kit that self taps a new fitting into the body. I got one at NAPA a few years back for a few dollars. Just have to be extra careful not to allow any of the metal shavings to enter the float. You can do it on the motor but you'll have to block the fuel passage to the seat with a plugged vacuum hose or something, then blow everything out.
#5
Senior Member
iTrader: (5)
Join Date: Mar 2007
Location: Texas
Posts: 898
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro
Engine: 5.7
Transmission: 700R4
Re: what year carb will direct fit a 1986 LG4?
I had the same thing happen to me. I tried thread tape. And the self taping fitting someone just mentioned, But it still leaked with all. I finally gave up and got a holley reman q-jet. the cars never ran better
#6
Supreme Member
iTrader: (10)
Join Date: Dec 2000
Location: Somewhere around the South Side of Chicago just crusin' in one of the Niteriders
Posts: 3,242
Likes: 0
Received 3 Likes
on
3 Posts
Car: 92RS 25th Anniv./88 IROC Z28 Vert
Engine: 305 TBI w/Tpi Air / 305 TPI
Transmission: 700r4/700r4
Axle/Gears: Posi
Re: what year carb will direct fit a 1986 LG4?
How much was that Holley reman Q-Jet and where did you get it from?
#7
Member
Join Date: Jul 2006
Location: waterford, MI
Posts: 186
Likes: 0
Received 3 Likes
on
1 Post
Car: 89 RS
Engine: 305 carbed
Transmission: 700R4
Axle/Gears: 3.42 auburn posi
Re: what year carb will direct fit a 1986 LG4?
you can use any Q-jet from 82-87 like someone mentioned but with a $7 adapter plate you can put any square bore carb on I.E edelbrock, holley, demon. adapter plate is from edelbrock sold through jegs or summit.
Trending Topics
#8
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Which, of course, would also require a non-computer distributor, TCC lock-up provision if automatic, and is about a 90% guarantee to be a downgrade.
#10
Junior Member
Join Date: Aug 1999
Location: Concord, CA, USA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28, 1984 Z28, 1990 Toyota 4x4
Engine: L98, L69, 22RE
Transmission: 700R4, 700R4, 5Speed Manual
Axle/Gears: 3.73, 3.23 Posi, 4.10
Re: what year carb will direct fit a 1986 LG4?
if you still need one, i found a rebuilt carb for an LG4 in my garage, never been installed, could use a bit of cleaning, but it's all there, PM me with an offer if you want it.
Thread
Thread Starter
Forum
Replies
Last Post