louflemm

on the carb it says 83310-1 2125 right under that one side says R81 other says P80. On the base of the carb there are these numbers 12R-4770B. its a 4 barrel. if anyone know what carb this is please let me know. thanks

This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!

mrjhett

From what I can find out on the web...it's either a 750 or 780. I am not sure if it's set up as a double pump or dual feed. If it has the jet/fuel plate on the back side it would be a double pump, if not then dual feed.
Either one is a great carb. I used to have a 780 dual feed on my small block 350 that flowed 810 CFM, with only some minor mods.
Look up just the 83310-1 number, and you should be able to find out more info.
Good luck.

bestracing

www.mortec.com

Has a good listing of Holley carbs and part numbers

__________________
86 T/A,
Motor restoration - Completed April, 2005, 2006, 2007, 2008......
Body restoration - Completed July, 2005
Graphics - Awaiting purchase


President, NKYFBA.com
The place to be in the Tri-State area!!

N. Ky, SW Oh, SE In.

five7kid

Not very good, actually, as it is sparse with information, and in this case, the information it has is wrong.

Holley's website has a better reference: http://www.holley.com/data/TechServi...%20Listing.pdf

Looks like a 4160 model vacuum secondary 750.

By the way, mrjhett, "dual feed" and "double pumper" are unrelated aspects of Holley carbs. It's either "dual or single feed", and either "double pumper or vacuum secondary".

mrjhett

My bad.... I guess I didn't say what I meant.... Thanks for clarifing.... I know the diff between those...jus didn't say it right lol Let me try now:
The 780 (Vacuum secondary , without the jet plate...jus the float bowl on the backside) was the carb I had...
BTW Thanks for the links, I'm going to save them...even though I'm not currently using carbration anymore....