Squeeling when heat is on?
#1
Member
Thread Starter
Join Date: Mar 2005
Location: Tyndall AFB, FL
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Z28
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: garbage 2.73
Squeeling when heat is on?
Everytime I turn my heat on. the hear a squeeling sound coming from the vents. How do I get to the fan to check it out?
#2
Moderator
iTrader: (5)
Re: Squeeling when heat is on?
https://www.thirdgen.org/forums/elec...aro-rs-no.html
Remove the necessary wiring and bolts and pull the fan and cage out. I'd suggest stuffing a towel/rag under the housing to catch the screws which you will undoubted drop (Don't ask me how I know!).
JamesC
#3
Senior Member
Join Date: Jul 2007
Location: Corner Brook, NL
Posts: 1,305
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28 HT,2006 2500HD
Engine: 5.7L, 6.6Llbz dmax
Transmission: 700R4, 6 speed allison
Axle/Gears: worn out 3.73 posi
Re: Squeeling when heat is on?
before you do that you should probably check your alternator and belt
#5
Senior Member
Join Date: Jul 2007
Location: Corner Brook, NL
Posts: 1,305
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28 HT,2006 2500HD
Engine: 5.7L, 6.6Llbz dmax
Transmission: 700R4, 6 speed allison
Axle/Gears: worn out 3.73 posi
Re: Squeeling when heat is on?
he said it squeals when he turns on the heat. the blower motor draws a nice bit of power so the extra drain on the alternator could cause it to squeal if the belt was loose or bad
#6
Member
Thread Starter
Join Date: Mar 2005
Location: Tyndall AFB, FL
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Z28
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: garbage 2.73
Re: Squeeling when heat is on?
Nah, it was the blower motor. Pulled the cage off and it squeeled when I spun the shaft.
#7
Supreme Member
Re: Squeeling when heat is on?
Is true about the belt though-mine will do that with
a loose belt.
a loose belt.
Thread
Thread Starter
Forum
Replies
Last Post