Can someone identify this memcal for me? Or tell me where I can find it. I have ordered Andrews cable and the pocket programer. Am going to try and start burning a chip this weekend. If this memcal won't work, can I use it untill I get the right combination? And then change the burned chip to a known 305 or 350 chip. Does the eprom have a calibration for the knock sensor, or are they located on the small chips on the memcal? Thanks. ------------------ 87 GTA 355/700r4 ported&polished 083 heads xe268h comp cam 1 5/8 blackjack alumicote homebuilt y pipe,pasesetter 3in mandrel cat back. ported/manifold,upper plentum, tpis maf. airfoil, 24# svo injectors, hypertech stage 3 chip, underdrive pulleys, erson roller rockers, chromemolley pushrods,2100 stall, shiftkit, 373 10 bolt.

ACKD is for a 88 2.5 Manual
Nope, not even close.

The electronic filtering for the K/S is on the memcal. What gets done with that info., is in the code.

Thanks Grumpy. I'll just pull the chip then. And use it for a modified arap.


------------------
87 GTA 355/700r4
ported&polished 083 heads
xe268h comp cam
1 5/8 blackjack alumicote
homebuilt y pipe,pasesetter 3in mandrel cat back.
ported/manifold,upper plentum, tpis maf.
airfoil, 24# svo injectors, hypertech stage 3 chip, underdrive pulleys, erson roller rockers, chromemolley pushrods,2100 stall, shiftkit, 373 10 bolt.