DIY PROMDo It Yourself PROM chip burning help. No PROM begging. No PROMs for sale. No commercial exchange. Not a referral service.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have a farily simple noob question regarding the spark tables from AUJP. Using the AUJP bin with the 8D mask and looking at the VE Tables, the extended values go up to 6400RPM while with the same bin the extended spark tables only go up to 5600. Up until now, I've ignored this fact as I was focused on just tuning a bolt-on L98, but now, with a camshaft and intake change, I plan on being able to take the motor to 6K rpms. If the spark table only goes to 5600rpm, does that mean that the ECM will continue to command the final spark advance value past that rpm? How would I tune for that extra 400 rpms in this case? Thanks for any help you can give.
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________ 91 Trans Am GTA
5.7L/Auto
SLP Performance Package (Almost)
Dyno Don Headers soon!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
