$32B too lean in midrange cant add fuel
#1
$32B too lean in midrange cant add fuel
I'm on the dyno. The car is way too lean from 3000-4500 rpm. I've added a ton of fuel to the BPW Fuel vs Load and it makes no difference. In some places I am asking for 19ms, but all the ecu will give me is 12ms.
I have tried this with the Base PW Calibration Method flag both checked and unchecked.
What I am doing wrong?
Thanks,
Aaron
I have tried this with the Base PW Calibration Method flag both checked and unchecked.
What I am doing wrong?
Thanks,
Aaron
#2
Re: $32B too lean in midrange cant add fuel
I'm going through my logs and noticed that at WOT (4.37 volts from TPS) and 2350rpm the ecu goes into closed loop? I thought the TPS would prevent that?
Aaron
Aaron
Thread
Thread Starter
Forum
Replies
Last Post