Ronny

iTrader: (1)

I had my Innovate WB reporting to its software in controller and to pillar gauge. I recall them showing the same data as far as A/F.

I then patched into EBL-WU and I do not recall then reporting a differing A/F from pillar gauge. The WU is regularly showing 1.5 points leaner and sometimes the same as pillar gauge .

Is there an offset that needs an adjustment in EBL for that deviation?

Thank you!

daferris

iTrader: (8)

You need to set the WB controller to report zero volts for 7.5 afr and 5v for 22.39afr

Ronny

iTrader: (1)

Thanks. I will did up owners manual....

Ronny

iTrader: (1)

Innovate automatically sets at that V by user selecting fuel in use. In my case E10. Stoich is reported at 14.7/1 or 1.0 Lambda,