Zepher

iTrader: (1)

I have the power window, power door lock switch, and the little power mirror joystick from a 4th gen camaro and want to mount the unit where my old power window and mirror controls are. I have the complete unit that comes from the 4th gen armrest, I am just going to get a plastic plate and mount the unit to that. I figured out the wiring pattern for the power windows to work, but I am having trouble with the power mirror wiring.
Anyone have a diagram so that I can wire it up correctly?

Thanks a bunch.

------------------
Zepher
'86 Pontiac Trans Am WS6, LG4 305, 5 Speed, CF DF Clutch,
Edelbrock 1406 Carb, Edelbrock Performer RPM 7101 Intake Manifold.
Edelbrock Open Element Air Cleaner: Flowmaster Exhaust, 160* Thermostat,
Grant GT Steering Wheel, MSD HEI Coil, Taylor 8mm Wires, Leather 96 Camaro SS Seats,
Alpine CD+Changer,Alpine V12 Amps, Premier TS-1040C Subs, Polk Audio highs/mids.
Best ET: 14.94@91.67
High Speed Run: 157mph
WS6 Trans Am

87Formula356

i need to know too! please someone help us out.

vernw

iTrader: (2)

Can you give me the info on how you wired the window switches? I'm getting ready to install a 4th gen console and will probably use some 4th Gen window and mirror switches to get everything working....

Have a Great Evening!


- Vern

Trickster

What do you need, the schematics for your original power mirror wiring?

vernw

iTrader: (2)

No, I'm hoping to fnd out how to wire up the 4th Gen Firebird switches to my 3rd Gen connectirs/harness. Maybe from someone who has done it? I appreciate your offer on the 3rd Gen diagrams, they might still be of help once I see what is what on the 4th Gen side. I just don't have any info on how the 4th Gens are wired.

Have a Great Day!


- Vern

IROCZZ3

This diagram is supposed to be for a 95 Camaro...
http://shbox.com/1/1995_camaro_pwr_mirrors.jpg

The rest of the site has helpful diagrams and stuff that I use on my 4th gen Z28-
http://shbox.com/1/4th_gen_tech1.html

vernw

iTrader: (2)

Thanks for that info - what a tremendous web site that is!

Wish someone had put together a site like that one for 3rd Gens (though I guess this one is pretty close to it with at least some of it's tech articles)

Again, THANKS!!!!!

IROCZZ3

No problem

87Formula356

so, in order to get the 4th gen buttons to work on the 3rd gen car (Windows and Mirrors) we need the 4th gen wireing harness and cut off the 3rd gen harness so the 4th gen harness can be wired in it's place?

Zepher

iTrader: (1)

No need to cut the harnesses. I just spliced in the 4th gen wires to the 3rd gen wires so that I could use either set of switches. I'll try and get a pic of my wires for you so you can see what I am talking about. Right now the car is a mess with a bunch of parts sitting inside of it and all the wiring is all over the floorboard.

This is a pic from 3 years ago when I wired up the 4th gen switches.

Couldn't get the mirrors to work though.

Xophertony

anybody know where i can get a diagram like that for a 93 lumina? would it be in the hynes/chiltons manual? i am trying to wire a 93 lumina switch into my 88GTA. i could also use the digram for the 3rd gen. but i think it is in my factory service manual.

Denis.V

Did you try @ AutoZone.com - Get in the Zone!

Under:

Repair Info/

Electrical/

Wiring Diagrams



Regards,

Denis V.

Xophertony

zepher, did you ever get that pic?