Electronics Need help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?

No juice.....

Thread Tools
 
Search this Thread
 
Old 05-18-2003, 11:43 AM
  #1  
Member

Thread Starter
 
80's Al's Avatar
 
Join Date: Jan 2000
Location: Dallas, GA
Posts: 126
Likes: 0
Received 0 Likes on 0 Posts
Car: 89' RS TPI,04' HEMI Dodge Q-cab
Engine: 383ci
Transmission: TCI 700R4, 3400 stall
Axle/Gears: 12 bolt 3.73
No juice.....

Finally got the fluids in and all the connections made on my 383 install.......but no juice.
Sounds like a VATS problem. Everthing works, ....EXCEPT, the starter does not engage, and no turnover, that is why I think it VATS!! BUT, the security light does NOT come on!!!

I had the new ECM programmed for VATS.
Do I need to bypass?
Could it be something else?

I have had this car on jackstands for a year, I am so damn close.....need all the input I can!!!

And YES.....I DID A SEARCH...... that is why I need help....wierd situation with no security light.

80's AL
80' Berlinetta
89' RS (close to runnin)
97' BIG Dodge truck:hail:
Old 05-29-2003, 03:10 PM
  #2  
Junior Member
 
Z383's Avatar
 
Join Date: May 2003
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
I'm having the same problem with my project, did you get it sorted out?
Old 05-30-2003, 04:45 AM
  #3  
Member

Thread Starter
 
80's Al's Avatar
 
Join Date: Jan 2000
Location: Dallas, GA
Posts: 126
Likes: 0
Received 0 Likes on 0 Posts
Car: 89' RS TPI,04' HEMI Dodge Q-cab
Engine: 383ci
Transmission: TCI 700R4, 3400 stall
Axle/Gears: 12 bolt 3.73
NO...not yet.

Now I have found out that there is no juice to the fuel tank, either!!!

I ran a wire straight from the battery to the starter solenoid....cranks and cranks...so I turned the key on....no fuel...this is how I came to check the fuel sending unit....kinda weird...

Might just start bypassin/splicing until the car runs....

I have an aftermarket alarm (Python)....not sure if that is blockin stuff.....

You may want to start lookin at other areas...too

80's AL
80' Berlinetta
89' RS (cranky and no starty)
97' BIG Dodge truck "Low ridin trucks are for guys who can't get it up!!!":hail:

Last edited by 80's Al; 05-30-2003 at 04:48 AM.
Old 05-31-2003, 02:56 PM
  #4  
3gc
Senior Member
 
3gc's Avatar
 
Join Date: Jul 1999
Location: Long Island NY
Posts: 917
Likes: 0
Received 1 Like on 1 Post
Car: Z28
Engine: 350 TPI
Transmission: 700R4
I had a similar problem in my 87. Took me a week to figure it out. Turned out that the yellow ignition wire under my dash that goes to the neutral saftey switch was cut because of the old alarm that i removed and i never respliced it. All the accessories worked but the engine wouldn't crank, i didn't hear the fuel pump turn on either. If your alarm has starter kill or remote start it'd be worth checking out.
Old 06-01-2003, 07:55 AM
  #5  
Member

Thread Starter
 
80's Al's Avatar
 
Join Date: Jan 2000
Location: Dallas, GA
Posts: 126
Likes: 0
Received 0 Likes on 0 Posts
Car: 89' RS TPI,04' HEMI Dodge Q-cab
Engine: 383ci
Transmission: TCI 700R4, 3400 stall
Axle/Gears: 12 bolt 3.73
finally....

Got the electric issues out of the way....

found a wire under the dash that will do the job for the starter, and found a straight positve lead that I seemed to have missed (little "prong" looking thing on the rad support right near the battery).

But now I cracked the case on the starter....here we go again....

80's AL
80' Berlinetta
89' RS (sounding strong...few more bugs)
97' BIG Dodge truck "Low ridin trucks are for guys who can't get it up!!":hail:




All times are GMT -5. The time now is 08:16 PM.