Power to coil, but no fire (and the coil is good!)
#1
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Sep 2000
Location: St. Louis, MO
Posts: 1,061
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 GTA
Engine: 402ci LS2
Transmission: faceplated T56
Axle/Gears: 9" w/ 4.11's
Power to coil, but no fire (and the coil is good!)
Like I said, I have power to the coil, but no fire from it. I swapped another good coil and it does the same thing. Is something wrong with the pickup coil or ignition module? I just replaced the ignition module 2 months ago. WTF is going on? PLEASE help... my babe is stranded along side the interstate
#2
Re: Power to coil, but no fire (and the coil is good!)
Originally posted by GTA91
Like I said, I have power to the coil, but no fire from it. I swapped another good coil and it does the same thing. Is something wrong with the pickup coil or ignition module? I just replaced the ignition module 2 months ago. WTF is going on? PLEASE help... my babe is stranded along side the interstate
Like I said, I have power to the coil, but no fire from it. I swapped another good coil and it does the same thing. Is something wrong with the pickup coil or ignition module? I just replaced the ignition module 2 months ago. WTF is going on? PLEASE help... my babe is stranded along side the interstate
#3
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Sep 2000
Location: St. Louis, MO
Posts: 1,061
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 GTA
Engine: 402ci LS2
Transmission: faceplated T56
Axle/Gears: 9" w/ 4.11's
No I didn't use a AC Delco replacement. I got a lifetime warrantied one from Autozone.... That was probably a bad move. How much are the GM ones? Well I have another new module and a new pickup coil. Hope to get it running tonight......
#4
Supreme Member
Join Date: Aug 2001
Location: Warrington, PA USA
Posts: 1,896
Likes: 0
Received 1 Like
on
1 Post
Car: "02 z-28
Engine: LS-1
Transmission: 4L60E
Re: Re: Power to coil, but no fire (and the coil is good!)
Originally posted by Morley
Did you use a Delco module for the replacement? If not I would immediatly suspect it.
Did you use a Delco module for the replacement? If not I would immediatly suspect it.
#5
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Sep 2000
Location: St. Louis, MO
Posts: 1,061
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 GTA
Engine: 402ci LS2
Transmission: faceplated T56
Axle/Gears: 9" w/ 4.11's
It was the IM again... replaced it and she is going good again. I'm headed to autozone tomorrow to bitch about this and then I'm headed to the GM dealer! Thanks guys!
#6
Expect to pay around $40 for one from GM, well worth it since they very rarely fail.
Originally posted by GTA91
It was the IM again... replaced it and she is going good again. I'm headed to autozone tomorrow to bitch about this and then I'm headed to the GM dealer! Thanks guys!
It was the IM again... replaced it and she is going good again. I'm headed to autozone tomorrow to bitch about this and then I'm headed to the GM dealer! Thanks guys!
#7
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Sep 2000
Location: St. Louis, MO
Posts: 1,061
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 GTA
Engine: 402ci LS2
Transmission: faceplated T56
Axle/Gears: 9" w/ 4.11's
Originally posted by Morley
Expect to pay around $40 for one from GM, well worth it since they very rarely fail.
Expect to pay around $40 for one from GM, well worth it since they very rarely fail.
Trending Topics
#8
Tell them to lay off the crack pipe
GM PART # 10482827
CATEGORY: Chassis Wiring & Computer Controls
PACK QTY: 1 CORE CHARGE: $0.00
GM LIST: $70.01
OUR PRICE: $35.01
DESCRIPTION: MODULE
Get it here
http://www.gmpartsdirect.com/results.cfm
GM PART # 10482827
CATEGORY: Chassis Wiring & Computer Controls
PACK QTY: 1 CORE CHARGE: $0.00
GM LIST: $70.01
OUR PRICE: $35.01
DESCRIPTION: MODULE
Get it here
http://www.gmpartsdirect.com/results.cfm
Originally posted by GTA91
I called GM and they said over $200.... WTF?!?!?!
I called GM and they said over $200.... WTF?!?!?!
Thread
Thread Starter
Forum
Replies
Last Post
9192camaro
Engine/Drivetrain/Suspension Parts for Sale
16
02-03-2019 12:21 AM
92camaroJoe
Tech / General Engine
6
08-13-2015 06:07 AM