Light problem
08-21-2006, 04:07 PM
#1
Member
Thread Starter
Join Date: Dec 2003
Location: Clifton Park NY
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro
Engine: 350
Transmission: 4L60
Light problem
Ok replaced my HeadLight switch did not correct this problem, When I turn my headlights on seems that with
the dash lights illuminated the guages all shut down, The gas guage goes to empty, the tach goes past redline and stays, the amp guage functions only. This car has the
ECM removed as it is now a Carb 350 engine. any thoughts
or things to try ?...Checked all the grounds and all good.
the dash lights illuminated the guages all shut down, The gas guage goes to empty, the tach goes past redline and stays, the amp guage functions only. This car has the
ECM removed as it is now a Carb 350 engine. any thoughts
or things to try ?...Checked all the grounds and all good.
08-21-2006, 04:36 PM
#2
Member
Join Date: Jun 2006
Location: North Alabama
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC-Z
Engine: 305 T.P.I.
Transmission: 700R4
Axle/Gears: 3.23
It's a pretty common problem mine is doing it too.... You might want to take the gauges out and look for breaks in the Printed Circuit Board on the back.
08-21-2006, 09:48 PM
#5
Member
Thread Starter
Join Date: Dec 2003
Location: Clifton Park NY
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro
Engine: 350
Transmission: 4L60
electric
right now I tend to think that by the Sirs system using the guages fuses as well as thier own it might be a overdraw on
the headlight switch causing a power drop but will test
further and see where that leads too..
the headlight switch causing a power drop but will test
further and see where that leads too..
Thread
Thread Starter
Forum
Replies
Last Post