VATS - Corect me if I'm wrong please
05-24-2008, 12:37 PM
#1
Member
Thread Starter
iTrader: (1)
Join Date: Feb 2007
Location: Spring, TX
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Bird
Engine: TPI 350
Transmission: 5-Speed
Axle/Gears: 2.77 posi
VATS - Corect me if I'm wrong please
I just swapped a 89 TPI 350 into my 91. I changed the ecm and wiring harness.
I did not change the VATS module - it is still for the 91.
Shouldn't my ignition key for the 91 work just fine? And the VATS module give the correct signal to the ecm?
Won't be ready to try starting it untill later today.
Thanks!
I did not change the VATS module - it is still for the 91.
Shouldn't my ignition key for the 91 work just fine? And the VATS module give the correct signal to the ecm?
Won't be ready to try starting it untill later today.
Thanks!
05-24-2008, 03:55 PM
#2
Member
Thread Starter
iTrader: (1)
Join Date: Feb 2007
Location: Spring, TX
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Bird
Engine: TPI 350
Transmission: 5-Speed
Axle/Gears: 2.77 posi
Re: VATS - Corect me if I'm wrong please
nevermind - threw the battery in and cranked it
Thread
Thread Starter
Forum
Replies
Last Post