91 camaro rear break light
01-03-2009, 01:19 PM
#1
Member
Thread Starter
Join Date: Nov 2006
Location: Wilmington, NC
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Chevy Camaro RS
Engine: V6 3.1L
Transmission: automatic
91 camaro rear break light
yeah so um my upper rear break light doesnt work. i tried a bulb and nothing. the fitting is sort of loose. idk much about electronics. any ideas?
01-03-2009, 02:34 PM
#2
Senior Member
Join Date: Jan 2008
Posts: 612
Likes: 0
Received 0 Likes
on
0 Posts
Re: 91 camaro rear break light
I would say to check the fuses, doubt it will do any good though, should be all three brake lights on one fuse.
You will want a test light or multimeter. With that see if you have power.
If you do, then the bulb has a bad connection, or it's not grounding.
If you don't have power you will have to follow the wires back until you find power. Then figure out why. Could be an plug loose, or a broken wire.
This is also where a wiring diagram is handy to see where the wires go.
You will want a test light or multimeter. With that see if you have power.
If you do, then the bulb has a bad connection, or it's not grounding.
If you don't have power you will have to follow the wires back until you find power. Then figure out why. Could be an plug loose, or a broken wire.
This is also where a wiring diagram is handy to see where the wires go.
Thread
Thread Starter
Forum
Replies
Last Post
