another wire harness Question
#1
Member
Thread Starter
iTrader: (2)
Join Date: Oct 2007
Location: Manchester NH
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Pontiac Trans Am
Engine: 305
Transmission: T-5
another wire harness Question
I am swapping my cc carbed 305 for 350 non cc I unplugged my ecm harness(pass side) on my 85 ta and removed that as one unit.What do I do about the Plug that That went to my T5 is this just for backup lights and how do I fix this.How do the other 2 harnesses unplug near the booster. I want to neating things up a little on the main harness..I did some searching but couldnt find any answers. Thanks
#2
Junior Member
Join Date: Jul 2009
Location: Pa
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 T/A
Engine: 383 TT
Transmission: th350
Axle/Gears: 3.55
Re: another wire harness Question
the harness near the booster should be held in by a 7mm bolt in the center of the harness on my 85 its 2 plugs (you can split them once you unbolt it) one harness is for the front lights the other for the starting/charging/wipers and i think a/c
#3
Member
Thread Starter
iTrader: (2)
Join Date: Oct 2007
Location: Manchester NH
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Pontiac Trans Am
Engine: 305
Transmission: T-5
Re: another wire harness Question
yeah thanks my bolt was covered in crud so I did not notice it.Do all the harness plugs have that nasty grease on the pins and connectors?or should i clean it..Anyone on the T5 tranny plug? I just want to make sure I dont need any of the ecm harness or computer.Before I chuck it..
Thread
Thread Starter
Forum
Replies
Last Post