Brake Lights wont come on.
07-11-2013, 09:20 PM
#1
Member
Thread Starter
Join Date: Jul 2011
Location: Los Angeles
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 305 LB9
Transmission: 700r4
Brake Lights wont come on.
This shouldnt be this hard, I've got a new brake light switch, all new bulbs, the ground looks good, and I cant see any faults in the wiring. Any theories? The Back Up Lights and the Turn Signal Lights work, just not the brake lights...
07-13-2013, 05:31 PM
#2
Supreme Member
iTrader: (35)
Join Date: Aug 2006
Location: Mississauga,Ont,Canada
Posts: 1,470
Likes: 0
Received 1 Like
on
1 Post
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: Brake Lights wont come on.
Did they work before you replaced the brake light switch? Do you have another switch to swap and see if it has the same issue?
07-15-2013, 05:03 PM
#3
Supreme Member
Join Date: Jan 2006
Location: Mooresville NC
Posts: 3,341
Likes: 0
Received 10 Likes
on
10 Posts
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Braking Bad Habit
Do the Hazard Lights work?
If no, use a voltmeter or test light (the type for testing for voltage, not a continuity tester) probe both sides (one side at a time) of the STOP HAZ fuse.
Is there power on both sides?
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
I Never Fight In The Pits . . . . . . . . . My Pit Crew Does That For Me
If no, use a voltmeter or test light (the type for testing for voltage, not a continuity tester) probe both sides (one side at a time) of the STOP HAZ fuse.
Is there power on both sides?
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
I Never Fight In The Pits . . . . . . . . . My Pit Crew Does That For Me
08-09-2013, 07:42 PM
#4
Member
Thread Starter
Join Date: Jul 2011
Location: Los Angeles
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 305 LB9
Transmission: 700r4
Re: Braking Bad Habit
My Hazards work... I dont understand, everything points to the brake lights working, except they dont. The answers are never clear with these cars lol
01-14-2014, 11:11 PM
#6
Member
Join Date: Mar 2012
Location: california
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
Car: camaro
Engine: 3.1
Transmission: auto
Re: Brake Lights wont come on.
i know its been a couple months but did you ever happen to find the cause? I have the same exact problem. new brake switch and its not working. all the fuses look to be in working order but none of the wires goin to switch seem to have power. all my wires are wrapped up so I don't wanna tear into all of it just yet if its something simpler.
01-15-2014, 01:33 AM
#7
Member
Join Date: Mar 2012
Location: california
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
Car: camaro
Engine: 3.1
Transmission: auto
Re: Brake Lights wont come on.
nvm played with it for a long time and figured it out. thanks anyway. for any1 else that has this problem. make sure the contacts inside the brake switch are making good contact! I had to bend it a bit so it would work. my wires were loose as well. tightened everything up and reconnected it everything works now.
Thread
Thread Starter
Forum
Replies
Last Post
