For Sale!!complete 305, TPI base, Other stuff, NITROUS Stuff
#1
Member
Thread Starter
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
For Sale!!complete 305, TPI base, Other stuff, NITROUS Stuff
OK- This stuff really needs to go guys, I dont have any place to keep it any longer. I dont want to set it outside in the weather so please come get it!!
1. COMPLETE Long Block 86 TPI 305 w/ a.i.r system & harmonic balancer. 125k miles, ran good no mech noises. burnt a little bit of oil. had to add about a half quart a month.-sold
2. 86 TPI baseplate-sold
3. 305 1prms 700r4 flywheel-sold
4. Air conditioning compressor, condesor and hoses.no ac box b/c AC box is still in car.
5. New Cherry Bomb Turbo II muffler in box dimensions are: 2 1/2 I.D. on both inlet and exit, it is 3 1/4" tall by 7 3/4" wide oval, Body is 13" long and a toal of 17" with inlet and exit P\N 16806
6. Laptop w/ Windows 98 & Tunerpro RT This auction is for a Dell Inspiron 3000 in GREAT working condition. Windows 98 is currently install and functional. The casing is in good shape, has some scratches but no major damage. The small memory cover on the underside is intact, but held in place with tape,but holds great. The following items are included:
- Laptop
- CD-rom drive
- Floppy drive
- AC adapter
- Battery
- Travel case
Laptop Specifications:
- Pentium processor, 166Mhz
- 80MB memory
- 2GB hard drive
- 13.1" display
- 2 PCMCIA slots
- VGA port
- PS/2 port
- Serial port
- Docking port
- Parallel port
- 1 USB port ---------------------SOLD
7. Vofenhag TurboFan ZX7150 800watt 2 channel Amplifier WORKS GREAT!!! I took out of car because it blew my subs...
8. Custom 3rd gen F-body Trunk cover/ 12" subwoofer "box"
This is a 3/4" thick board covered very nicely in grey carpet that covers up the trunk well area and still gives you room underneath for storing stuff.
9. Uniden Bearcat 30 channel 10 band police/fire/ EMS handheld portable scanner w/ ac cord.
10. The WALL remote start/car alarm. P\N: WALL XCS-570 It has been installed and uninstalled, has all components, 2 remotes, all wire, and instructions. MADE IN USA!!!!
11. COMPUCAR Carburated Wet Nitrous base plate. approx. 1 " tall aluminum . the bolt holes are going across at an X approx. 7" and i'd say going parallel they are 6"
12. Compucar Nitrous Wet kit w/ solenoids, 10# bottle, bracket and 10ft of hose
13. NOS Wet nitrous fogger nozzle w/ .053 and.047 jets.
1. COMPLETE Long Block 86 TPI 305 w/ a.i.r system & harmonic balancer. 125k miles, ran good no mech noises. burnt a little bit of oil. had to add about a half quart a month.-sold
2. 86 TPI baseplate-sold
3. 305 1prms 700r4 flywheel-sold
4. Air conditioning compressor, condesor and hoses.no ac box b/c AC box is still in car.
5. New Cherry Bomb Turbo II muffler in box dimensions are: 2 1/2 I.D. on both inlet and exit, it is 3 1/4" tall by 7 3/4" wide oval, Body is 13" long and a toal of 17" with inlet and exit P\N 16806
6. Laptop w/ Windows 98 & Tunerpro RT This auction is for a Dell Inspiron 3000 in GREAT working condition. Windows 98 is currently install and functional. The casing is in good shape, has some scratches but no major damage. The small memory cover on the underside is intact, but held in place with tape,but holds great. The following items are included:
- Laptop
- CD-rom drive
- Floppy drive
- AC adapter
- Battery
- Travel case
Laptop Specifications:
- Pentium processor, 166Mhz
- 80MB memory
- 2GB hard drive
- 13.1" display
- 2 PCMCIA slots
- VGA port
- PS/2 port
- Serial port
- Docking port
- Parallel port
- 1 USB port ---------------------SOLD
7. Vofenhag TurboFan ZX7150 800watt 2 channel Amplifier WORKS GREAT!!! I took out of car because it blew my subs...
8. Custom 3rd gen F-body Trunk cover/ 12" subwoofer "box"
This is a 3/4" thick board covered very nicely in grey carpet that covers up the trunk well area and still gives you room underneath for storing stuff.
9. Uniden Bearcat 30 channel 10 band police/fire/ EMS handheld portable scanner w/ ac cord.
10. The WALL remote start/car alarm. P\N: WALL XCS-570 It has been installed and uninstalled, has all components, 2 remotes, all wire, and instructions. MADE IN USA!!!!
11. COMPUCAR Carburated Wet Nitrous base plate. approx. 1 " tall aluminum . the bolt holes are going across at an X approx. 7" and i'd say going parallel they are 6"
12. Compucar Nitrous Wet kit w/ solenoids, 10# bottle, bracket and 10ft of hose
13. NOS Wet nitrous fogger nozzle w/ .053 and.047 jets.
Last edited by indirocz28; 05-08-2006 at 10:18 AM.
#2
Member
Thread Starter
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
here is a picture of the nitrous kit- if tgo will let me post it..
Edit- no it wont
Edit- no it wont
#5
Member
Thread Starter
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
Originally Posted by Camaroman P
I need the fuel lines engine to the tank
I dont have any fuel lines man.. sorry..- i saw some on e-bay for like $20 just the other day..
----------
Pictures of my car, and of the nitrous kit can be viewed at this link-
https://www.thirdgen.org/forums/cars...elling-my.html
Last edited by indirocz28; 05-05-2006 at 10:10 PM. Reason: Automerged Doublepost
Trending Topics
#8
Member
Thread Starter
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
Originally Posted by Drac0nic
what are you looking to get for the engine? Is it serpentine or V-belts?
it only has a v-belt crank pulley with it right now and an alternator w/a v belt pulley also. the waterpump doesnt have a pulley on it b/c i put it on the my 358.. anyways, for everything i have with the motor i was hoping for $175. thats for the longblock, flywheel, baseplate, waterpump, pulley's alternator,harmonic balancer, and whatever else is laying there with it... its been inside with oil in it in a controlled invironment so its not rusted or had water in it or anything like that.. it still turns over by wrench and hand..
----------
Originally Posted by savage7102
is the wet kit tbi or tpi i need for holley tbi?
as for the nitrous kit- it was originally for a carburated setup and i bought the NOS EFI tip for it.., so it has a carb baseplate for it, i dont know what all carb's it fits, but the EFI nozzle you just screw into your incoming air tract and make sure it points twards your throttle body opening and spray your way down the track, or the street whatever you wish.. it was originally used in a race car and kept in the passenger compartment. the 10 ft of line is not enough to reach from the trunk to the engine bay on a 3rd gen. I've not installed this kit yet in my car but i've got it sitting right here beside my computer desk...
Last edited by indirocz28; 05-06-2006 at 08:56 AM. Reason: Automerged Doublepost
#9
Supreme Member
iTrader: (7)
Join Date: Jan 2006
Location: Santa Rosa, Cali
Posts: 1,160
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 IROC 5.7 Money Pit
Engine: (being built; modified TPI ZZ4
Transmission: 2200 stall/ stage 3 700R4
Axle/Gears: freshened 3.27 in 9.bolt/
Bearcat for sale...
Hi! I'm asking after the Bearcat scanner. Is this the one that has a setting to let you know if the police are transmitting close by? and the price? Nitro
#10
Member
Thread Starter
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
Originally Posted by neagan
Hi! I'm asking after the Bearcat scanner. Is this the one that has a setting to let you know if the police are transmitting close by? and the price? Nitro
If you go to say Radioshack and buy a code book and program your codes, it will scan through the frequencies over and over again until say a dispatcher at the station radios an officer, or say an ambulance or a firetruck is called out, as well as hospital codes, city codes ( like street department, county road department) and things like that.. I paid about $100 new for this scanner a year ago. still has the original batteries in it and the charger.
asking $35 + shipping - so probably w/ shipping it would be $45 total..
let me know.
#11
Member
Thread Starter
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
LIST UPDATE
OK- This stuff really needs to go guys, I dont have any place to keep it any longer. I dont want to set it outside in the weather so please come get it!!
1. COMPLETE Long Block 86 TPI 305 w/ a.i.r system & harmonic balancer. 125k miles, ran good no mech noises. burnt a little bit of oil. had to add about a half quart a month.-sold
2. 86 TPI baseplate-sold
3. 305 1prms 700r4 flywheel-sold
4. Air conditioning compressor, condesor and hoses.no ac box b/c AC box is still in car.
5. New Cherry Bomb Turbo II muffler in box dimensions are: 2 1/2 I.D. on both inlet and exit, it is 3 1/4" tall by 7 3/4" wide oval, Body is 13" long and a toal of 17" with inlet and exit P\N 16806
6. Laptop w/ Windows 98 & Tunerpro RT This auction is for a Dell Inspiron 3000 in GREAT working condition. Windows 98 is currently install and functional. The casing is in good shape, has some scratches but no major damage. The small memory cover on the underside is intact, but held in place with tape,but holds great. The following items are included:
- Laptop
- CD-rom drive
- Floppy drive
- AC adapter
- Battery
- Travel case
Laptop Specifications:
- Pentium processor, 166Mhz
- 80MB memory
- 2GB hard drive
- 13.1" display
- 2 PCMCIA slots
- VGA port
- PS/2 port
- Serial port
- Docking port
- Parallel port
- 1 USB port ---------------------SOLD
7. Vofenhag TurboFan ZX7150 800watt 2 channel Amplifier WORKS GREAT!!! I took out of car because it blew my subs...
8. Custom 3rd gen F-body Trunk cover/ 12" subwoofer "box"
This is a 3/4" thick board covered very nicely in grey carpet that covers up the trunk well area and still gives you room underneath for storing stuff.
9. Uniden Bearcat 30 channel 10 band police/fire/ EMS handheld portable scanner w/ ac cord.
10. The WALL remote start/car alarm. P\N: WALL XCS-570 It has been installed and uninstalled, has all components, 2 remotes, all wire, and instructions. MADE IN USA!!!!
11. COMPUCAR Carburated Wet Nitrous base plate. approx. 1 " tall aluminum . the bolt holes are going across at an X approx. 7" and i'd say going parallel they are 6"
12. Compucar Nitrous Wet kit w/ solenoids, 10# bottle, bracket and 10ft of hose
13. NOS Wet nitrous fogger nozzle w/ .053 and.047 jets.
1. COMPLETE Long Block 86 TPI 305 w/ a.i.r system & harmonic balancer. 125k miles, ran good no mech noises. burnt a little bit of oil. had to add about a half quart a month.-sold
2. 86 TPI baseplate-sold
3. 305 1prms 700r4 flywheel-sold
4. Air conditioning compressor, condesor and hoses.no ac box b/c AC box is still in car.
5. New Cherry Bomb Turbo II muffler in box dimensions are: 2 1/2 I.D. on both inlet and exit, it is 3 1/4" tall by 7 3/4" wide oval, Body is 13" long and a toal of 17" with inlet and exit P\N 16806
6. Laptop w/ Windows 98 & Tunerpro RT This auction is for a Dell Inspiron 3000 in GREAT working condition. Windows 98 is currently install and functional. The casing is in good shape, has some scratches but no major damage. The small memory cover on the underside is intact, but held in place with tape,but holds great. The following items are included:
- Laptop
- CD-rom drive
- Floppy drive
- AC adapter
- Battery
- Travel case
Laptop Specifications:
- Pentium processor, 166Mhz
- 80MB memory
- 2GB hard drive
- 13.1" display
- 2 PCMCIA slots
- VGA port
- PS/2 port
- Serial port
- Docking port
- Parallel port
- 1 USB port ---------------------SOLD
7. Vofenhag TurboFan ZX7150 800watt 2 channel Amplifier WORKS GREAT!!! I took out of car because it blew my subs...
8. Custom 3rd gen F-body Trunk cover/ 12" subwoofer "box"
This is a 3/4" thick board covered very nicely in grey carpet that covers up the trunk well area and still gives you room underneath for storing stuff.
9. Uniden Bearcat 30 channel 10 band police/fire/ EMS handheld portable scanner w/ ac cord.
10. The WALL remote start/car alarm. P\N: WALL XCS-570 It has been installed and uninstalled, has all components, 2 remotes, all wire, and instructions. MADE IN USA!!!!
11. COMPUCAR Carburated Wet Nitrous base plate. approx. 1 " tall aluminum . the bolt holes are going across at an X approx. 7" and i'd say going parallel they are 6"
12. Compucar Nitrous Wet kit w/ solenoids, 10# bottle, bracket and 10ft of hose
13. NOS Wet nitrous fogger nozzle w/ .053 and.047 jets.
#12
Supreme Member
iTrader: (7)
Join Date: Jan 2006
Location: Santa Rosa, Cali
Posts: 1,160
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 IROC 5.7 Money Pit
Engine: (being built; modified TPI ZZ4
Transmission: 2200 stall/ stage 3 700R4
Axle/Gears: freshened 3.27 in 9.bolt/
RE: that Uniden scanner?????
Hey, just checking back in. I thought we were sewed up on the scanner???? Did I not do something? I still absolutely want it, Nitro
#13
Member
Thread Starter
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
List update
OK- This stuff really needs to go guys, I dont have any place to keep it any longer. I dont want to set it outside in the weather so please come get it!!
1. COMPLETE Long Block 86 TPI 305 w/ a.i.r system & harmonic balancer. 125k miles, ran good no mech noises. burnt a little bit of oil. had to add about a half quart a month.-sold
2. 86 TPI baseplate-sold
3. 305 1prms 700r4 flywheel-sold
4. Air conditioning compressor, condesor and hoses.
no ac box b/c AC box is still in car.
5. New Cherry Bomb Turbo II muffler in box dimensions are: 2 1/2 I.D. on both inlet and exit, it is 3 1/4" tall by 7 3/4" wide oval, Body is 13" long and a toal of 17" with inlet and exit P\N 16806
6. Laptop w/ Windows 98 & Tunerpro RT This auction is for a Dell Inspiron 3000 in GREAT working condition. Windows 98 is currently install and functional. The casing is in good shape, has some scratches but no major damage. The small memory cover on the underside is intact, but held in place with tape,but holds great. The following items are included:
- Laptop
- CD-rom drive
- Floppy drive
- AC adapter
- Battery
- Travel case
Laptop Specifications:
- Pentium processor, 166Mhz
- 80MB memory
- 2GB hard drive
- 13.1" display
- 2 PCMCIA slots
- VGA port
- PS/2 port
- Serial port
- Docking port
- Parallel port
- 1 USB port ---------------------SOLD
7. Vofenhag TurboFan ZX7150 800watt 2 channel Amplifier WORKS GREAT!!! I took out of car because it blew my subs...
8. Custom 3rd gen F-body Trunk cover/ 12" subwoofer "box"
This is a 3/4" thick board covered very nicely in grey carpet that covers up the trunk well area and still gives you room underneath for storing stuff.
9. Uniden Bearcat 30 channel 10 band police/fire/ EMS handheld portable scanner w/ ac cord.--------Pending
10. The WALL remote start/car alarm. P\N: WALL XCS-570 It has been installed and uninstalled, has all components, 2 remotes, all wire, and instructions. MADE IN USA!!!! $35 shipped!!!
11. COMPUCAR Carburated Wet Nitrous base plate. approx. 1 " tall aluminum . the bolt holes are going across at an X approx. 7" and i'd say going parallel they are 6"
1. COMPLETE Long Block 86 TPI 305 w/ a.i.r system & harmonic balancer. 125k miles, ran good no mech noises. burnt a little bit of oil. had to add about a half quart a month.-sold
2. 86 TPI baseplate-sold
3. 305 1prms 700r4 flywheel-sold
4. Air conditioning compressor, condesor and hoses.
no ac box b/c AC box is still in car.
5. New Cherry Bomb Turbo II muffler in box dimensions are: 2 1/2 I.D. on both inlet and exit, it is 3 1/4" tall by 7 3/4" wide oval, Body is 13" long and a toal of 17" with inlet and exit P\N 16806
6. Laptop w/ Windows 98 & Tunerpro RT This auction is for a Dell Inspiron 3000 in GREAT working condition. Windows 98 is currently install and functional. The casing is in good shape, has some scratches but no major damage. The small memory cover on the underside is intact, but held in place with tape,but holds great. The following items are included:
- Laptop
- CD-rom drive
- Floppy drive
- AC adapter
- Battery
- Travel case
Laptop Specifications:
- Pentium processor, 166Mhz
- 80MB memory
- 2GB hard drive
- 13.1" display
- 2 PCMCIA slots
- VGA port
- PS/2 port
- Serial port
- Docking port
- Parallel port
- 1 USB port ---------------------SOLD
7. Vofenhag TurboFan ZX7150 800watt 2 channel Amplifier WORKS GREAT!!! I took out of car because it blew my subs...
8. Custom 3rd gen F-body Trunk cover/ 12" subwoofer "box"
This is a 3/4" thick board covered very nicely in grey carpet that covers up the trunk well area and still gives you room underneath for storing stuff.
9. Uniden Bearcat 30 channel 10 band police/fire/ EMS handheld portable scanner w/ ac cord.--------Pending
10. The WALL remote start/car alarm. P\N: WALL XCS-570 It has been installed and uninstalled, has all components, 2 remotes, all wire, and instructions. MADE IN USA!!!! $35 shipped!!!
11. COMPUCAR Carburated Wet Nitrous base plate. approx. 1 " tall aluminum . the bolt holes are going across at an X approx. 7" and i'd say going parallel they are 6"
#14
Member
Join Date: Mar 2006
Location: Houston, Texas
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 5.0 TBI
Transmission: T5
Axle/Gears: 3.08
I am interested in the remote start/alarm system... everything is there correct?? Does everything work on the 3rd gen??
#15
Supreme Member
iTrader: (7)
Join Date: Mar 2005
Location: mid GA
Posts: 1,926
Likes: 0
Received 3 Likes
on
2 Posts
Car: 88 IROC
Engine: 305 TPI w/ l98 cam
Transmission: T5 5-speed
Axle/Gears: 3.45 posi disc 9 bolt
are both of the nitrous kits gone? if not id be interested in a tpi one. but do you have the plate that goes behind the throttle body for it?
#17
Member
Thread Starter
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
Originally Posted by Slave One
I am interested in the remote start/alarm system... everything is there correct?? Does everything work on the 3rd gen??
$35 shipped?
#19
Member
Thread Starter
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
Originally Posted by 82 Iron Duke
If you can't sell the remote I will take it, I can paypal right away.
First person with the $ takes it... I can ship it out wednesday...
txmxrider_1569@hotmail.com is my paypal
Be sure to include Name, address, city, zipcode, and a phone number in the sales invoice thing you fill out...
#20
Member
Thread Starter
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
any takers? lots of offers but no $$ yet....
ttt
ttt
#22
Member
Thread Starter
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
Originally Posted by 82 Iron Duke
I wanted it for my car but I have a 5 speed and it won't work, thanks anyway.
#24
Member
Thread Starter
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
Originally Posted by Slave One
I'll take it! Paypal sent...
#25
Member
Join Date: Mar 2006
Location: Houston, Texas
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 5.0 TBI
Transmission: T5
Axle/Gears: 3.08
Remote Start/ ALarm...
Hey there indirocz28,
I Paypal'd you $35 on May 16th for the alarm system, have you shipped it yet???
Thanks,
Rex
I Paypal'd you $35 on May 16th for the alarm system, have you shipped it yet???
Thanks,
Rex
#27
Member
Join Date: Mar 2006
Location: Houston, Texas
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 5.0 TBI
Transmission: T5
Axle/Gears: 3.08
All's Well!!
Hey guys,
Just wanted to let you all know this guy is cool!
Didn't mean to alarm anyone if I did...
Just wanted to let you all know this guy is cool!
Didn't mean to alarm anyone if I did...
#28
Supreme Member
iTrader: (7)
Join Date: Jan 2006
Location: Santa Rosa, Cali
Posts: 1,160
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 IROC 5.7 Money Pit
Engine: (being built; modified TPI ZZ4
Transmission: 2200 stall/ stage 3 700R4
Axle/Gears: freshened 3.27 in 9.bolt/
Sent Funds for Scanner almost a month ago/where is it?
I Pay Pal'd the money for the Uniden Scanner on May 12th and havn't seen it yet- it's been almost a full month..... WARNING!
Nitro
Nitro
#29
Member
Thread Starter
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
Originally Posted by neagan
I Pay Pal'd the money for the Uniden Scanner on May 12th and havn't seen it yet- it's been almost a full month..... WARNING!
Nitro
Nitro
----------
Originally Posted by 92orange
How much for nozzle and jets to 64150?
Last edited by indirocz28; 06-05-2006 at 03:44 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM