Stock TPI Engine harness, TPI parts
05-20-2006, 07:57 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Stock TPI Engine harness, TPI parts
The harness is complete from PCM, through the bulkhead, and through out the engine. Swapped to an HSR with a painless harness, about to wedge the engine in a truck. Make me an offer
I will also have the TPI setup (plenum, runners, manifold) off the engine soon and will be selling those too, as well as the fuel lines since the HSR needs its own fuel lines. The runners are nearly spotless, 1 light dent in #8 runner though.
I will also have the TPI setup (plenum, runners, manifold) off the engine soon and will be selling those too, as well as the fuel lines since the HSR needs its own fuel lines. The runners are nearly spotless, 1 light dent in #8 runner though.
Ok, IS IT A SPEED DENSITY?! If not I give up my dibs... 
05-21-2006, 05:49 PM
#4
Junior Member
Thread Starter
Join Date: Mar 2006
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
its from an 88 or 89 350 GTA bird. So its not a speed density, sorry.
Oh BTW guys im looking for an oil pan for my 350 TPI (thats now a vortec 355 HSR) the pan thats on the engine now has some nice dents in it. I want this engine perfect before i paint it and put it in my truck so if you have a nice oil pan with no dents or rust, even if its stock, we can do a trade. Id love to get my hands on a 6qt pan
Oh BTW guys im looking for an oil pan for my 350 TPI (thats now a vortec 355 HSR) the pan thats on the engine now has some nice dents in it. I want this engine perfect before i paint it and put it in my truck so if you have a nice oil pan with no dents or rust, even if its stock, we can do a trade. Id love to get my hands on a 6qt pan
Last edited by DodgeTech; 05-21-2006 at 05:55 PM.
05-22-2006, 10:45 AM
#5
I'm interested in the harness. I'll see what I can do about rounding up an oil pan. The only ones I have are stock depth, but I may know someone with an extra capacity one. In the meantime, just let me know how much you'd want for the harness for cash outright. Thanks, Pat.
05-26-2006, 04:21 PM
#6
Junior Member
Thread Starter
Join Date: Mar 2006
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
guys im sorry i havent had a chance to take some pictures of the parts yet. im going to take a few pictures of them tomorrow since i have a long weekend. im looking to get around 100 for the harness, or best offer. this harness connects EVERYTHING under the hood, AC ETC. besides an oil pan im also looking for a stock GM grille for my 88 chevy pick up. dont know if you guys know anyone with an old truck you can take parts from, figured id ask. ill post up some pictures here of the runners, plenum, harness and intake manifold tomorrow, sorry for the delay
Trending Topics
05-28-2006, 11:22 AM
#10
Junior Member
Join Date: Jun 2003
Location: Sachse, TX
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
how much for the TPI set-up? i am in the navy and ship within hours, you can email me at kriebelc@elrod.navy.mil thanks
06-01-2006, 10:56 AM
#17
engine wireing harness.
Ill take it if it will work in my 1988 ta . Will you take $75.oo shipped?i have a mass air 165 computer and chip.Im removed the tbi wireing harness.please get back to me asap.
Thread
Thread Starter
Forum
Replies
Last Post
The_Phoenix
Engine/Drivetrain/Suspension Parts for Sale
7
09-03-2015 10:56 PM