The harness is complete from PCM, through the bulkhead, and through out the engine. Swapped to an HSR with a painless harness, about to wedge the engine in a truck. Make me an offer

I will also have the TPI setup (plenum, runners, manifold) off the engine soon and will be selling those too, as well as the fuel lines since the HSR needs its own fuel lines. The runners are nearly spotless, 1 light dent in #8 runner though.

 

I call first dibs!!! Ok, IS IT A SPEED DENSITY?! If not I give up my dibs...

 

Please specify what year all the TPI stuff is from, including the harness. Thanks.

 

its from an 88 or 89 350 GTA bird. So its not a speed density, sorry.

Oh BTW guys im looking for an oil pan for my 350 TPI (thats now a vortec 355 HSR) the pan thats on the engine now has some nice dents in it. I want this engine perfect before i paint it and put it in my truck so if you have a nice oil pan with no dents or rust, even if its stock, we can do a trade. Id love to get my hands on a 6qt pan

 

I'm interested in the harness. I'll see what I can do about rounding up an oil pan. The only ones I have are stock depth, but I may know someone with an extra capacity one. In the meantime, just let me know how much you'd want for the harness for cash outright. Thanks, Pat.

 

guys im sorry i havent had a chance to take some pictures of the parts yet. im going to take a few pictures of them tomorrow since i have a long weekend. im looking to get around 100 for the harness, or best offer. this harness connects EVERYTHING under the hood, AC ETC. besides an oil pan im also looking for a stock GM grille for my 88 chevy pick up. dont know if you guys know anyone with an old truck you can take parts from, figured id ask. ill post up some pictures here of the runners, plenum, harness and intake manifold tomorrow, sorry for the delay

 

Check your pm's.

 

Heres some pictures of the TPI stuff. Im also going to sell the heads and valve covers. I took them off today and was very suprised to see how clean they are

 

the exaust manifolds are up for dibs too. The only thing i really wanted the engine for was the block

 

how much for the TPI set-up? i am in the navy and ship within hours, you can email me at kriebelc@elrod.navy.mil thanks

 

what do you want with the set up? the runners, plenum and manifold?

 

Interested in selling just the fuel rail setup with the FPR ?

 

yeah ill sell you the fuel rail with regulator. have an offer in mind?

 

PM Sent

 

Do you still have the Throttle Body? How much for the TB and the runners?
-Phil

 

do you still have the harness and ecm, is it sd or maf what it it out of

 

Ill take it if it will work in my 1988 ta . Will you take $75.oo shipped?i have a mass air 165 computer and chip.Im removed the tbi wireing harness.please get back to me asap.

 

The harness is sold and the PCM is not for sale