Last Few Hours before E-bay! 406 inside!
#1
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
Last Few Hours before E-bay! 406 inside!
Im selling my 406, and giving everyone one last chance to buy it on here. ill be putting parts off of it on e-bay tonight so if anyone is serious its time to let me know. here are some specs.
2 bolt main 406 SBC hypertec pistons(9.6:1 w/ 70cc heads)
Stock crank turned .010 on rods and mains.
stock length rods w/ ARP bolts
Sealed power rings, bearings, frost plugs
Edelbrock RPM 70cc heads
Proform black crinkle finish chevrolet stamped valve covers
1.6 stamped steel rockers
Crane Retro-fit roller cam+lifters 222/230 509/528
Hardened pushrods
Edelbrock RPM air gap intake(10 miles)
Holley 850 Double pumper(10 miles) w/holley brushed alum fuel line
The motor runs flawlessly with no noises or smoke.
ill even throw in the accesories and a brand new alternator thats on the engine still. let me know soon because i will be taking it apart in a few hours. i know its not alot of time but its my last chance to everyone else.
and ill sell it all for $2400 I have over 4k into this motor and it has approx 10-12k miles on it. maybe a little less.
2 bolt main 406 SBC hypertec pistons(9.6:1 w/ 70cc heads)
Stock crank turned .010 on rods and mains.
stock length rods w/ ARP bolts
Sealed power rings, bearings, frost plugs
Edelbrock RPM 70cc heads
Proform black crinkle finish chevrolet stamped valve covers
1.6 stamped steel rockers
Crane Retro-fit roller cam+lifters 222/230 509/528
Hardened pushrods
Edelbrock RPM air gap intake(10 miles)
Holley 850 Double pumper(10 miles) w/holley brushed alum fuel line
The motor runs flawlessly with no noises or smoke.
ill even throw in the accesories and a brand new alternator thats on the engine still. let me know soon because i will be taking it apart in a few hours. i know its not alot of time but its my last chance to everyone else.
and ill sell it all for $2400 I have over 4k into this motor and it has approx 10-12k miles on it. maybe a little less.
Last edited by TPIMarow6.6; 11-17-2006 at 05:08 PM.
#2
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
i also have a video of the engine running when it was in my car a few days before i pulled it out.....
#6
Junior Member
Join Date: May 2005
Location: Cazenovia, WI
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83 Z28
Engine: Mild 383 Stroker
Transmission: B&M TH400 with shift kit
Axle/Gears: 3.73 Limited Slip
If you part out, I'd like to know how much you want for the intake and carb...
#7
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
ill give you a price and we can go from there...im willing to negotiate. $575 for the carb and the intake and ill throw in some other small stuff i have like the carb studs and holley throttle bracket
Trending Topics
#9
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
long block as in no cam setup right? if so i would take $750 for the block and rotating assembly.
#10
Member
iTrader: (13)
Join Date: Feb 2006
Location: Dexter MO
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Z28
Engine: 406
Transmission: TH350
Axle/Gears: 9-inch w/ 3.50 posi
406
sorry should have been more clear i want everything except intake,carb, valve covers, and acc. motor assembled with heads and cam.
#11
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
ill take 1800 for the long block. sorry i was mistaken when i read it, i thought you said short block.
#14
Member
iTrader: (32)
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes
on
1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
im interested in the shortblock, can you tell me some more specifics on it? what oil pressure does it carry, I have 64 cc dart heads, wondering what the compression would be with them, also, what cc are the pistons? dished or domed.
if you can ship also what would the price be.
cash in hand as you know
randy
if you can ship also what would the price be.
cash in hand as you know
randy
#15
Supreme Member
iTrader: (16)
Join Date: Dec 2001
Location: Tiffin OHIO
Posts: 2,006
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Iroc-z Convertible
how much for cam and lifters? also how lopey was it? shipping to 44883 any pics od the lifters? all in good shape? sorry for all th equestions but I am definitely interested. thx
#17
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
this is how the car sounds with a 3'' cat 3'' catback slp headers.
http://videos.streetfire.net/video/3...4d015f407c.htm
i think im selling the short block with cam ect at a great price. so for the cam setup only i will do 450+shipping.
http://videos.streetfire.net/video/3...4d015f407c.htm
i think im selling the short block with cam ect at a great price. so for the cam setup only i will do 450+shipping.
#18
Supreme Member
iTrader: (5)
Join Date: Sep 2004
Location: Casselberry, FLA
Posts: 2,771
Likes: 0
Received 5 Likes
on
5 Posts
Car: 88 V6 'bird/89TBI bird/85 T/A
Engine: 2.8/TBI/TPI
Transmission: V8 T-5/700R4 x2
Axle/Gears: 3.42 open/2.73 open/ 3.27 9 bolt
Some of you 305 guys need to seriously consider this...
#19
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
thanks KrisW i need to get rid of this so ill do $950 for the complete bottom end with cam and all(lifters and pushrods). heres your chance guys to get a nice setup!
Thread
Thread Starter
Forum
Replies
Last Post
school boy
Engine/Drivetrain/Suspension Parts for Sale
7
10-22-2015 11:47 AM
KO1
Engine/Drivetrain/Suspension Parts for Sale
16
10-15-2015 05:00 PM