FS-- almost every car thing i have...
#1
Supreme Member
Thread Starter
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
FS-- almost every car thing i have...
mmk, im parting out my camaro, garage, everything.. ask me for a price on stuff.
02 LS1 with 6spd... needs clutch and id rebuild the 6spd.. but the engine runs strong.. much stronger then it should.
has 224/228-114 cam with the good pre-sourcechange 918s and TSP pushrods. ASP pulley too. stock LS6 intake, etc... has about 75k on motor. borescope still shows factory fresh crosshatch.
engine could be sold with, or without accessories, with pulley or without, with cam, or with stock stuff... so PM me and SPECIFICY exactly what you want and expect and we'll work something out.
PAracing tubular Kmember and tubular A-arms... fits thirdgen Fbody and has mounts for the LS1. doesnt fit SBC, it fits the LS1. its black.
LS1 to 90-92 camaro harness.. plug and play.
rearend - Moser 9" housing, Moser axles, Strange Nodular centersection, Detroit locker, 3.70 gears. torque arm mount has been milled slightly to align the torque arm better. can sell torque arm with it. has 'LT1' style PBR brakes on it.
torque arm.. Jegster adjustable... works great.
'drews' style T56 crossmember with 'humps' for exhaust clearance.
corbeau CR1 seats.. faded a bit, and cover is wearing thin on drivers side.. get them, put new covers on, have badass lightweight seats that boltin to your thirdgen or fourthgen... will come with the sliders and stuff.
Bogart rear rims.. 5 something, i forget the name at the moment... they're friggen LIGHT.
92 camaro parts car.. its been picked thru a little, but i'll sell it CHEAP. same as scrap value. lol.
NX single nozzle nitrous system... 10lb bottle, brackets, purge, nitrous filter, MSD windowswitch, etc... can be totally hidden. every line has a mist of flat black over it to make it less obvious.
thirdgen camaro ALUMINUM front bumper support, with holes holsawed into it for half the alum weight... it'll hold the nose up on your drag car at speed... i wouldnt count on it as a bumper, but its better then running nothing and cupping air. people leaned on the nose all the time, they never knew... it doesnt bend or anything like that.
thirdgen AC delete box. kinda rare to find.
OR, you can buy the 91 camaro convertible with all of the above.. its not apart yet.
the car itself has SFCs, new roof with GLASS rear window, power trunk, power door locks, power windows, etc... nice non-cracked dash, etc.
if you want it after i pull everything thats an option too... will have a stock TBI 305 in it when its sells.. can be a manual or an auto car. was factory auto, currently a manual.
i have a shitload of misc thirdgen parts. if you need a small worthless plastic thing thats almost impossible to find.. im probably hording one, incase i ever needed it.
LS1 mockup block.. its a stock block, with a hole in it.
98 LS1 heads.. used with the mockup block.
1stgen Gtech.. the radar detector looking one.. i never use it.
clear thirdgen hard plastic nose.... its a plastic nosebra for a camaro. a hard plastic clear nosebra.. kinda cool looking.
anything heavy, like the rear, LS1, etc.. im not shipping. im in charleston, SC, come get it. everything else.. you pay shipping...lol
oh, and i know i have more crap, im just tired of typing. lol.
02 LS1 with 6spd... needs clutch and id rebuild the 6spd.. but the engine runs strong.. much stronger then it should.
has 224/228-114 cam with the good pre-sourcechange 918s and TSP pushrods. ASP pulley too. stock LS6 intake, etc... has about 75k on motor. borescope still shows factory fresh crosshatch.
engine could be sold with, or without accessories, with pulley or without, with cam, or with stock stuff... so PM me and SPECIFICY exactly what you want and expect and we'll work something out.
PAracing tubular Kmember and tubular A-arms... fits thirdgen Fbody and has mounts for the LS1. doesnt fit SBC, it fits the LS1. its black.
LS1 to 90-92 camaro harness.. plug and play.
rearend - Moser 9" housing, Moser axles, Strange Nodular centersection, Detroit locker, 3.70 gears. torque arm mount has been milled slightly to align the torque arm better. can sell torque arm with it. has 'LT1' style PBR brakes on it.
torque arm.. Jegster adjustable... works great.
'drews' style T56 crossmember with 'humps' for exhaust clearance.
corbeau CR1 seats.. faded a bit, and cover is wearing thin on drivers side.. get them, put new covers on, have badass lightweight seats that boltin to your thirdgen or fourthgen... will come with the sliders and stuff.
Bogart rear rims.. 5 something, i forget the name at the moment... they're friggen LIGHT.
92 camaro parts car.. its been picked thru a little, but i'll sell it CHEAP. same as scrap value. lol.
NX single nozzle nitrous system... 10lb bottle, brackets, purge, nitrous filter, MSD windowswitch, etc... can be totally hidden. every line has a mist of flat black over it to make it less obvious.
thirdgen camaro ALUMINUM front bumper support, with holes holsawed into it for half the alum weight... it'll hold the nose up on your drag car at speed... i wouldnt count on it as a bumper, but its better then running nothing and cupping air. people leaned on the nose all the time, they never knew... it doesnt bend or anything like that.
thirdgen AC delete box. kinda rare to find.
OR, you can buy the 91 camaro convertible with all of the above.. its not apart yet.
the car itself has SFCs, new roof with GLASS rear window, power trunk, power door locks, power windows, etc... nice non-cracked dash, etc.
if you want it after i pull everything thats an option too... will have a stock TBI 305 in it when its sells.. can be a manual or an auto car. was factory auto, currently a manual.
i have a shitload of misc thirdgen parts. if you need a small worthless plastic thing thats almost impossible to find.. im probably hording one, incase i ever needed it.
LS1 mockup block.. its a stock block, with a hole in it.
98 LS1 heads.. used with the mockup block.
1stgen Gtech.. the radar detector looking one.. i never use it.
clear thirdgen hard plastic nose.... its a plastic nosebra for a camaro. a hard plastic clear nosebra.. kinda cool looking.
anything heavy, like the rear, LS1, etc.. im not shipping. im in charleston, SC, come get it. everything else.. you pay shipping...lol
oh, and i know i have more crap, im just tired of typing. lol.
#2
Supreme Member
iTrader: (35)
Join Date: Feb 2003
Location: Albuquerque, NM
Posts: 1,229
Likes: 0
Received 3 Likes
on
2 Posts
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: FS-- almost every car thing i have...
Looking for a complete stock auto shifter for a 700R4 and the top plate. By chance, do you have it?
Got pictures of the seats? How much?
Got pictures of the seats? How much?
#3
Member
Join Date: Oct 2005
Location: OKLAHOMA
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 CAMARO
Engine: 434
Transmission: th400 rmvb,nc 4500 stall
Axle/Gears: MOSER 12BOLT,35splineaxels,4.33gear
Re: FS-- almost every car thing i have...
how much for the aluminum bumper support?
#4
Senior Member
Join Date: Nov 2000
Location: Queen Creek, AZ
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula
Engine: 383 HSR
Transmission: 5th 700R4
Axle/Gears: 3.89
Re: FS-- almost every car thing i have...
wanting price and pics of the seats, bogarts, and rearend?
#6
Supreme Member
Thread Starter
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
Re: FS-- almost every car thing i have...
yes, i have 2 of them.. one with white lettering (late 80s style) the other with yellow (90-92 style).. i'll dig them up and take pics.
i have someone local asking about the seats... they were $1200 new, i'll take $500 plus shipping since thats what someone local offered.
you're 2nd in line for them right now.
$100, but you're 3rd in line.
seats $500, you'd be 3rd in line if you're intrested...
bogarts $400... but you'd need a 4thgen width rear. btw if you know what rims these are, thats a steal. force 5s are not cheap. lol.
rear end, im not shipping. you'll have to pickup locally... 2k even.
good question.. they're 31.. standard truck count... i chose that so i could have a wide option of lockers, posi (trac-loc), or spool and swap out centers.. ive sold my other centers to local friends...
btw, this one also has an billet alum daytona pinion support, and a billet yolk... i forgot that part too.
#7
Supreme Member
iTrader: (45)
Join Date: Dec 2003
Location: Northern, VA
Posts: 3,970
Likes: 0
Received 0 Likes
on
0 Posts
Car: Pair of 92 Z28s
Re: FS-- almost every car thing i have...
Whats up getting out of third gens? Something big come up to where it all has to go?
Hope your not leaving the site ive enjoyed critical non-bullshit responses, facts and opinions to everything. lol.
92 camaro parts car.. its been picked thru a little, but i'll sell it CHEAP. same as scrap value. lol.
Im in need of a 91-92 interior harness. From the tail lights to the computer to the bulkhead connector on the driver side firewall. More power options the car has the better...let me know if that is a possible item to remove.
How is the body on that 91 vert? How much for the car as a shell, with top and vert parts included?
Thanks
-Steve
Hope your not leaving the site ive enjoyed critical non-bullshit responses, facts and opinions to everything. lol.
92 camaro parts car.. its been picked thru a little, but i'll sell it CHEAP. same as scrap value. lol.
Im in need of a 91-92 interior harness. From the tail lights to the computer to the bulkhead connector on the driver side firewall. More power options the car has the better...let me know if that is a possible item to remove.
How is the body on that 91 vert? How much for the car as a shell, with top and vert parts included?
Thanks
-Steve
Trending Topics
#8
Supreme Member
Thread Starter
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
Re: FS-- almost every car thing i have...
Whats up getting out of third gens? Something big come up to where it all has to go?
Hope your not leaving the site ive enjoyed critical non-bullshit responses, facts and opinions to everything. lol.
92 camaro parts car.. its been picked thru a little, but i'll sell it CHEAP. same as scrap value. lol.
Im in need of a 91-92 interior harness. From the tail lights to the computer to the bulkhead connector on the driver side firewall. More power options the car has the better...let me know if that is a possible item to remove.
How is the body on that 91 vert? How much for the car as a shell, with top and vert parts included?
Thanks
-Steve
Hope your not leaving the site ive enjoyed critical non-bullshit responses, facts and opinions to everything. lol.
92 camaro parts car.. its been picked thru a little, but i'll sell it CHEAP. same as scrap value. lol.
Im in need of a 91-92 interior harness. From the tail lights to the computer to the bulkhead connector on the driver side firewall. More power options the car has the better...let me know if that is a possible item to remove.
How is the body on that 91 vert? How much for the car as a shell, with top and vert parts included?
Thanks
-Steve
i dont know how hard it is to remove that interior harness.. ive only taken them out after taking the whole car apart... hmm.. i'll get back to you on that... probably not this weekend holloween weekend is busy for me, so it would be the following weekend... car isnt at my house its at a friends.
body.. every panel has atleast one dent in it.. and it needs paint.
all of the vert parts are great though... the top is in perfect condition (its new).. etc...
im going to try to sell the car as a running car... i have plenty of stock crap to throw in it (stock Kmember, aarms, TBI 305, etc....) so it shoudlnt be a problem...
because of planning to do that, id want atleast 1200 for it... i know the shell is worth more then that up north because its rust free.. but down here, everything is rust free.. lol.
#9
Supreme Member
iTrader: (45)
Join Date: Dec 2003
Location: Northern, VA
Posts: 3,970
Likes: 0
Received 0 Likes
on
0 Posts
Car: Pair of 92 Z28s
Re: FS-- almost every car thing i have...
If you could piece it together to work as a running shell to make the trip from SC to VA...only necessary parts to drive. $1200 and youd have a deal lol. I could get a truck down there if we really worked something out...but ya id need to know a lot more details about the car. Does it still have the LS1/T56 installed now?
Anyway that interior harness, from the front to back is easy it runs under the driver sill plate through the plastics, to the rear and from behind driver seat to console. I "think" the front part is removable without taking out the dash, just the under panels. Like 3 connectors at the ecm and of course the bulkhead at the firewall. 2 big connectors at the back of the gauges, and the other accessories around there. Just let me know, im not in a rush. Does that car has power windows, hatch?
Thanks.
Anyway that interior harness, from the front to back is easy it runs under the driver sill plate through the plastics, to the rear and from behind driver seat to console. I "think" the front part is removable without taking out the dash, just the under panels. Like 3 connectors at the ecm and of course the bulkhead at the firewall. 2 big connectors at the back of the gauges, and the other accessories around there. Just let me know, im not in a rush. Does that car has power windows, hatch?
Thanks.
#10
Supreme Member
Thread Starter
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
Re: FS-- almost every car thing i have...
If you could piece it together to work as a running shell to make the trip from SC to VA...only necessary parts to drive. $1200 and youd have a deal lol. I could get a truck down there if we really worked something out...but ya id need to know a lot more details about the car. Does it still have the LS1/T56 installed now?
Anyway that interior harness, from the front to back is easy it runs under the driver sill plate through the plastics, to the rear and from behind driver seat to console. I "think" the front part is removable without taking out the dash, just the under panels. Like 3 connectors at the ecm and of course the bulkhead at the firewall. 2 big connectors at the back of the gauges, and the other accessories around there. Just let me know, im not in a rush. Does that car has power windows, hatch?
Thanks.
Anyway that interior harness, from the front to back is easy it runs under the driver sill plate through the plastics, to the rear and from behind driver seat to console. I "think" the front part is removable without taking out the dash, just the under panels. Like 3 connectors at the ecm and of course the bulkhead at the firewall. 2 big connectors at the back of the gauges, and the other accessories around there. Just let me know, im not in a rush. Does that car has power windows, hatch?
Thanks.
as for the $1200.. i ment that as id want $1200 if i didnt go thru the work of putting it to running condition.... because doing that id have to put a couple hundred into it.. and that of course comes out of the bottom line.. nto to mention my time.
id make it a roller (put a stock Kmember/aarms in) but i wouldnt put it all together for ya for $1200.. lol.
currently the car is together and running.. the clutch has problems, but with a new clutch, i could drive it across the country and back.
since ive had a few people asking... id take 6k for the whole car, and all its associated pieces.... although i figured i'll have to part it out to make that...
really 6k is my 'goal' with the parts/car..
#11
Supreme Member
iTrader: (45)
Join Date: Dec 2003
Location: Northern, VA
Posts: 3,970
Likes: 0
Received 0 Likes
on
0 Posts
Car: Pair of 92 Z28s
Re: FS-- almost every car thing i have...
Didn't think so haha.
A running ls1/t56 vert sounds nice...but a little out my budget right now. Anyway just let me know about that interior harness and let me know before you pull it to make sure i didn't already find one locally. Thanks.
A running ls1/t56 vert sounds nice...but a little out my budget right now. Anyway just let me know about that interior harness and let me know before you pull it to make sure i didn't already find one locally. Thanks.
#12
Re: FS-- almost every car thing i have...
any third gen performance parts? besides the ls1 swap....lol.
strut tower brace? anything for suspension?
145 speedo?
looking for my 91 z28
strut tower brace? anything for suspension?
145 speedo?
looking for my 91 z28
#13
Supreme Member
iTrader: (1)
Join Date: Jun 2002
Location: Chicago, IL
Posts: 1,843
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro RS Convertible
Engine: 305 TBI
Transmission: 5-Speed
Axle/Gears: 3.42
Re: FS-- almost every car thing i have...
For the 91 Vert, do you have that plastic trim piece that goes across the front of the top (where the two latches are)? If so I'm all over that, how much do you think it would be to ship it, kind of fragile, I'm in Chicago. Let me know, thanks
#14
Supreme Member
iTrader: (5)
Join Date: Jan 2001
Location: Evansville,IN,USA
Posts: 2,025
Likes: 0
Received 1 Like
on
1 Post
Car: 89' T/A, 00' Firehawk
Engine: 406 Roller
Transmission: TH700R4 w/2800 stall
Axle/Gears: 3.23 Posi
Re: FS-- almost every car thing i have...
What kind of springs do you have on the car?
#15
Supreme Member
Thread Starter
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
Re: FS-- almost every car thing i have...
moroso trick springs on the front...
aftermarket rear springs... 650/in or something crazy like that.. they're a little stiffer then WS6 springs... but it launches good.
i also have a BMR extreme drag bar with spohn bolt on brackets for the 9".. if someone wants it.
aftermarket rear springs... 650/in or something crazy like that.. they're a little stiffer then WS6 springs... but it launches good.
i also have a BMR extreme drag bar with spohn bolt on brackets for the 9".. if someone wants it.
#17
Supreme Member
Thread Starter
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
Re: FS-- almost every car thing i have...
i want to dig them out and look at them.. maybe take pics before i go off saying what they're worth.. lol.
i would have done it lastnight but it was pouring rain.. its still pouring right now.
#18
Re: FS-- almost every car thing i have...
any third gen performance parts? besides the ls1 swap....lol.
strut tower brace? anything for suspension?
145 speedo?
looking for my 91 z28
strut tower brace? anything for suspension?
145 speedo?
looking for my 91 z28
#20
Supreme Member
iTrader: (7)
Join Date: Aug 2005
Location: Ohio, near columbus
Posts: 1,068
Likes: 0
Received 1 Like
on
1 Post
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
Re: FS-- almost every car thing i have...
heres a quick comprehensive list of parts i could use in the interior if you have them multiples that i need list them because, i'd rather buy most all of them from 1 guy instead of a bunch of different people.
z28 high rise spoiler, z28 hood scoops, driverside maroon kickpane (good condition), driverside hush panel and fuse panel cover for an iroc (89 to be exact), black vinyl center counsol lid, good door panels not warped and massively faded, prefer off the newer style vinyl 1s and i think that's it for now let me know i've got cash in hand (or m.o. i should say), pm me if you have with a price shipped to my door 43056.
z28 high rise spoiler, z28 hood scoops, driverside maroon kickpane (good condition), driverside hush panel and fuse panel cover for an iroc (89 to be exact), black vinyl center counsol lid, good door panels not warped and massively faded, prefer off the newer style vinyl 1s and i think that's it for now let me know i've got cash in hand (or m.o. i should say), pm me if you have with a price shipped to my door 43056.
#24
Member
iTrader: (1)
Join Date: Sep 2006
Location: North Dakota
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86' Z28 Camaro
Engine: 357 TPI -- Dart Heads -- Voodoo Cam
Transmission: Built 700r4
Axle/Gears: 3.23 Posi
Re: FS-- almost every car thing i have...
What kind of fan setup do you have? Single/Dual?
And how much shipped to 58075?
Thanks!
And how much shipped to 58075?
Thanks!
#25
Senior Member
iTrader: (4)
Join Date: May 2006
Location: Beloeil, Quebec
Posts: 704
Likes: 0
Received 2 Likes
on
2 Posts
Car: IROC-Z
Engine: LSx
Transmission: T56
Axle/Gears: Fabbed 9"
Re: FS-- almost every car thing i have...
Interested in Drews crossmember. Send me a price and pics to spikeiroc@hotmail.com. Thanks
#26
Re: FS-- almost every car thing i have...
is any of this still available? It's been a week and no responses on the thread or from PM's. I'd really like a shot at that crossmember!!
#28
#30
Member
iTrader: (1)
Join Date: May 2005
Location: Pasadena
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Z28
Engine: uh does the name give u a hint
Transmission: 700r4
Axle/Gears: 2.73
Re: FS-- almost every car thing i have...
how about the ac brackets for a mounting about the powersteering pump?? or an a/c delete pulley v-belt
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
15
12-29-2023 08:23 AM