305 Ported Heads and Comp Cams Rocker Arms
12-03-2007, 04:38 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2003
Location: Colorado
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2001 VW Passat
Engine: 1.8 Turbo
Transmission: Automatic 5 speed with Tiptronic
Axle/Gears: Stock
305 Ported Heads and Comp Cams Rocker Arms
I have a set of ported 305 heads with Z-28 high-rev springs (dual spring design) and all of the retainers for sale. The heads have been ported, had a three angle valve job and take 1.94/1.5 valve sizes. The heads flow:
Intake Exhaust
.100/64 .100/50.3
.200/126.5 .200/106.6
.300/170.5 .300/151.8
.400/202.4 .400/169.4
.500/209.6 .500/180.4
.600/214 .600/182
The heads have been used and I took the valves and valve locks to use on another set of heads for a 350. The heads are $350
I also have a set of used Comp Cams Magnum roller tip rocker arms with 1.6:1 ratio. They have the center hemisphere and were used with those heads above. The set of 16 will be $100.
If you buy both the heads and rocker arms I will knock the price down to $400. Email me at Cory0550@yahoo.com if you are interested.
Intake Exhaust
.100/64 .100/50.3
.200/126.5 .200/106.6
.300/170.5 .300/151.8
.400/202.4 .400/169.4
.500/209.6 .500/180.4
.600/214 .600/182
The heads have been used and I took the valves and valve locks to use on another set of heads for a 350. The heads are $350
I also have a set of used Comp Cams Magnum roller tip rocker arms with 1.6:1 ratio. They have the center hemisphere and were used with those heads above. The set of 16 will be $100.
If you buy both the heads and rocker arms I will knock the price down to $400. Email me at Cory0550@yahoo.com if you are interested.
12-03-2007, 06:58 PM
#2
Senior Member
Join Date: Aug 2006
Location: Ontario, Canada
Posts: 807
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Trans Am GTA
Engine: LSX (swapping)
Transmission: 4L60E (swapping)
Axle/Gears: 2.73 Posi 10 Bolt
Re: 305 Ported Heads and Comp Cams Rocker Arms
Pictures of the rockers? My email is shift.2004@gmail.com
12-31-2007, 11:45 AM
#5
Senior Member
iTrader: (6)
Join Date: May 2005
Location: Long Island, NY
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2002 WS6 A4
Engine: LS1
Transmission: 4L60E
Axle/Gears: 3.23
Re: 305 Ported Heads and Comp Cams Rocker Arms
if they are 081 heads i will take them with the rockers...let me know a shipping cost to 32907
01-03-2008, 09:30 AM
#6
Junior Member
Thread Starter
Join Date: Apr 2003
Location: Colorado
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2001 VW Passat
Engine: 1.8 Turbo
Transmission: Automatic 5 speed with Tiptronic
Axle/Gears: Stock
Re: 305 Ported Heads and Comp Cams Rocker Arms
The shipping would be $50. So the total would be $450, please contact me via email Cory0550@yahoo.com. And we can exchange addresses.
Thread
Thread Starter
Forum
Replies
Last Post
