Garage cleanup!!!!
#1
Senior Member
Thread Starter
iTrader: (5)
Join Date: May 2005
Location: Midwest IL
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Garage cleanup!!!!
I have (1) R.J.S. Red 5 pt. harness for sale. Date stamp is April 2006. $30
Drivers window regulator and motor. $25
Passenger window regulator and motor. $25
Holley Fuel Pressure Regulator 12-803. $10
Billet Y-Block 3/8 inlet & outlets with pressure port. $10
416 Heads $50
(6) KB pistons .030 305 p/n KB144 $100
Stock front springs 1984 Z28 $40
Hood w/ VFN 6" Scoop (on car in pic), not show quality $75
Radiator from 1984 Z28 (no trans cooler) $40
28x9 MT Slicks (have alot of passes on them, but still work good) $50
Cleaning up garage more to add later!!
Drivers window regulator and motor. $25
Passenger window regulator and motor. $25
Holley Fuel Pressure Regulator 12-803. $10
Billet Y-Block 3/8 inlet & outlets with pressure port. $10
416 Heads $50
(6) KB pistons .030 305 p/n KB144 $100
Stock front springs 1984 Z28 $40
Hood w/ VFN 6" Scoop (on car in pic), not show quality $75
Radiator from 1984 Z28 (no trans cooler) $40
28x9 MT Slicks (have alot of passes on them, but still work good) $50
Cleaning up garage more to add later!!
#3
Senior Member
Thread Starter
iTrader: (5)
Join Date: May 2005
Location: Midwest IL
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Re: Garage cleanup!!!!
Heads are good, removed from a running 305, no cracks, shipping, I'm not sure on but probably at least dbl what the price of the heads are. UPS charged 15.00 to ship out a 5pt. harness that weighed 6 lbs I will check and let you know though.
#5
Senior Member
Thread Starter
iTrader: (5)
Join Date: May 2005
Location: Midwest IL
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Re: Garage cleanup!!!!
UPS is outrageous....however looking on fed-ex site looks like I could ship for approximately $65.00. So grand total of $115.00.
#6
Junior Member
Join Date: Dec 2007
Location: NJ
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Firebird
Engine: 305 ci sbc
Transmission: 700R4
Axle/Gears: Stupid one legger!
Re: Garage cleanup!!!!
do you still have the hood, if so how much shipped to 08093 (NJ)
Trending Topics
#8
Senior Member
Thread Starter
iTrader: (5)
Join Date: May 2005
Location: Midwest IL
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Re: Garage cleanup!!!!
86FIREBIRDSBC: I'm sure the hood would be atleast $150.00 to ship but will check further if you are interested.
creepingdeath: Will have to check, not sure how bad shipping would be to canada guessing somewhere around $40, just let me know.
creepingdeath: Will have to check, not sure how bad shipping would be to canada guessing somewhere around $40, just let me know.
#11
Senior Member
Thread Starter
iTrader: (5)
Join Date: May 2005
Location: Midwest IL
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Re: Garage cleanup!!!! UPDATED
I have (1) R.J.S. Red 5 pt. harness for sale. Date stamp is April 2006. $30 SOLD
Drivers window regulator and motor. $25
Passenger window regulator and motor. $25
Holley Fuel Pressure Regulator 12-803. $10 Pending
Billet Y-Block 3/8 inlet & outlets with pressure port. $10 Pending
416 Heads $50
(6) KB pistons .030 305 p/n KB144 $100
Stock front springs 1984 Z28 $40
Hood w/ VFN 6" Scoop (on car in pic), not show quality $75
Radiator from 1984 Z28 (no trans cooler) $40
28x9 MT Slicks (have alot of passes on them, but still work good) $50
Radio Trim Bezel $10
Drivers window regulator and motor. $25
Passenger window regulator and motor. $25
Holley Fuel Pressure Regulator 12-803. $10 Pending
Billet Y-Block 3/8 inlet & outlets with pressure port. $10 Pending
416 Heads $50
(6) KB pistons .030 305 p/n KB144 $100
Stock front springs 1984 Z28 $40
Hood w/ VFN 6" Scoop (on car in pic), not show quality $75
Radiator from 1984 Z28 (no trans cooler) $40
28x9 MT Slicks (have alot of passes on them, but still work good) $50
Radio Trim Bezel $10
#14
Senior Member
Join Date: Nov 2007
Posts: 744
Likes: 0
Received 1 Like
on
1 Post
Car: 1983 Camaro Z28
Engine: 383
Transmission: TKO 600
Axle/Gears: Strange S60
Re: Garage cleanup!!!!
would it be possible to just get one of the heads? all I need is one of them and that would cut shipping down some... those are the 1.84 intake valves right?
#15
Senior Member
Thread Starter
iTrader: (5)
Join Date: May 2005
Location: Midwest IL
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Re: Garage cleanup!!!!
Would prefer not to split up the heads, but I could do it for $70 shipped.
----------
I have (1) R.J.S. Red 5 pt. harness for sale. Date stamp is April 2006. $30 SOLD
Drivers window regulator and motor. $25
Passenger window regulator and motor. $25
Holley Fuel Pressure Regulator 12-803. $10
Billet Y-Block 3/8 inlet & outlets with pressure port. $10 Pending
416 Heads $50
(6) KB pistons .030 305 p/n KB144 $100
Stock front springs 1984 Z28 $40
Hood w/ VFN 6" Scoop (on car in pic), not show quality $75
Radiator from 1984 Z28 (no trans cooler) $40
28x9 MT Slicks (have alot of passes on them, but still work good) $50
Radio Trim Bezel $10
Torque arm mount for TH400 with Poly bushing $50
Stock Torque Arm $15
Weiand 7546 Intake $65
Holley 650 DP with milled off choke horn $250
----------
I have (1) R.J.S. Red 5 pt. harness for sale. Date stamp is April 2006. $30 SOLD
Drivers window regulator and motor. $25
Passenger window regulator and motor. $25
Holley Fuel Pressure Regulator 12-803. $10
Billet Y-Block 3/8 inlet & outlets with pressure port. $10 Pending
416 Heads $50
(6) KB pistons .030 305 p/n KB144 $100
Stock front springs 1984 Z28 $40
Hood w/ VFN 6" Scoop (on car in pic), not show quality $75
Radiator from 1984 Z28 (no trans cooler) $40
28x9 MT Slicks (have alot of passes on them, but still work good) $50
Radio Trim Bezel $10
Torque arm mount for TH400 with Poly bushing $50
Stock Torque Arm $15
Weiand 7546 Intake $65
Holley 650 DP with milled off choke horn $250
Last edited by KWIK84; 01-22-2008 at 12:56 PM. Reason: Automerged Doublepost
#17
Senior Member
Thread Starter
iTrader: (5)
Join Date: May 2005
Location: Midwest IL
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Re: Garage cleanup!!!!
I have (1) R.J.S. Red 5 pt. harness for sale. Date stamp is April 2006. $30 SOLD
Drivers window regulator and motor. $25
Passenger window regulator and motor. $25
Holley Fuel Pressure Regulator 12-803. $10 pending
Billet Y-Block 3/8 inlet & outlets with pressure port. SOLD
(6) KB pistons .030 305 p/n KB144 $100
Stock front springs 1984 Z28 $40
Hood w/ VFN 6" Scoop (on car in pic), not show quality $75
Radiator from 1984 Z28 (no trans cooler) $40
28x9 MT Slicks (have alot of passes on them, but still work good) $50
Radio Trim Bezel $10
Torque arm mount for TH400 with Poly bushing $50
Stock Torque Arm $15
Weiand 7546 Intake $65
Holley 650 DP with milled off choke horn $250
Drivers window regulator and motor. $25
Passenger window regulator and motor. $25
Holley Fuel Pressure Regulator 12-803. $10 pending
Billet Y-Block 3/8 inlet & outlets with pressure port. SOLD
(6) KB pistons .030 305 p/n KB144 $100
Stock front springs 1984 Z28 $40
Hood w/ VFN 6" Scoop (on car in pic), not show quality $75
Radiator from 1984 Z28 (no trans cooler) $40
28x9 MT Slicks (have alot of passes on them, but still work good) $50
Radio Trim Bezel $10
Torque arm mount for TH400 with Poly bushing $50
Stock Torque Arm $15
Weiand 7546 Intake $65
Holley 650 DP with milled off choke horn $250
#18
Senior Member
Thread Starter
iTrader: (5)
Join Date: May 2005
Location: Midwest IL
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Re: Garage cleanup!!!!
have (1) R.J.S. Red 5 pt. harness for sale. Date stamp is April 2006. $30 SOLD
Drivers window regulator and motor. $25
Passenger window regulator and motor. $25
Holley Fuel Pressure Regulator 12-803. $10
Billet Y-Block 3/8 inlet & outlets with pressure port. SOLD
(6) KB pistons .030 305 p/n KB144 $100
Stock front springs 1984 Z28 $40
Hood w/ VFN 6" Scoop (on car in pic), not show quality $75 SOLD
Radiator from 1984 Z28 (no trans cooler) $40
28x9 MT Slicks (have alot of passes on them, but still work good) $50
Radio Trim Bezel $10
Torque arm mount for TH400 with Poly bushing $50
Stock Torque Arm $15
Weiand 7546 Intake $65
Holley 650 DP with milled off choke horn $250
Drivers window regulator and motor. $25
Passenger window regulator and motor. $25
Holley Fuel Pressure Regulator 12-803. $10
Billet Y-Block 3/8 inlet & outlets with pressure port. SOLD
(6) KB pistons .030 305 p/n KB144 $100
Stock front springs 1984 Z28 $40
Hood w/ VFN 6" Scoop (on car in pic), not show quality $75 SOLD
Radiator from 1984 Z28 (no trans cooler) $40
28x9 MT Slicks (have alot of passes on them, but still work good) $50
Radio Trim Bezel $10
Torque arm mount for TH400 with Poly bushing $50
Stock Torque Arm $15
Weiand 7546 Intake $65
Holley 650 DP with milled off choke horn $250
#19
Junior Member
iTrader: (2)
Join Date: Feb 2006
Location: Gloucester, Va
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROCZ
Engine: 355, Vortec Heads, Carbed
Transmission: TH350, 2800 stall
Axle/Gears: 3.27 9 Bolt
Re: Garage cleanup!!!!
How much for the slicks shipped to 23072? Will the clear the stock wheel well?
#21
Senior Member
Thread Starter
iTrader: (5)
Join Date: May 2005
Location: Midwest IL
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Re: Garage cleanup!!!!
Slicks will clear stock wheel wells.....I will check on shipping
Springs had some surface rust on them, when I took them out I cleaned them up and gave them a fresh coat of black paint.
Springs had some surface rust on them, when I took them out I cleaned them up and gave them a fresh coat of black paint.
#22
Supreme Member
iTrader: (7)
Join Date: Oct 2000
Location: Orange County,NY
Posts: 2,112
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Z28
Engine: 355
Transmission: T56
Axle/Gears: 12 Bolt
Re: Garage cleanup!!!!
Still have this...
Holley Fuel Pressure Regulator 12-803. $10
I want it...you take paypal?
Shipping will be to ramsey, nj 07446
Holley Fuel Pressure Regulator 12-803. $10
I want it...you take paypal?
Shipping will be to ramsey, nj 07446
Thread
Thread Starter
Forum
Replies
Last Post
Linson
Auto Detailing and Appearance
12
10-01-2015 09:50 PM