ScottyRS

iTrader: (2)

Hey guys,

I've decided to abandon my 383 project and sell off some of these parts. All of them are brand spankin' new, and have been sitting in my room for the past year. Here's a list of everything I'm trying to get rid of...

• Eagle forged steel 3.75" crank
• Scat forged steel 5.7" connecting rods (p/n 2-ICR5700-7/16)
• SRP forged aluminum flat-top pistons (set of 8 with wrist pins and rings)
• Comp Cams retro-fit hydraulic roller lifters (link bars not pictured)
• Comp Cams custom grind retro-fit small circle base cam
• Comp Cams timing chain set

Here are the specs for the cam:
Duration @ .050: 236 Intake - 242 Exhaust
Valve Lift: .520 Intake - .540 Exhaust
Lobe Separation: 106


I'll even throw in the cam button if you buy the cam, and some ARP bolts designed to hold it in. Parts are located in Miami if you want to pick them up. I'm willing to ship, but it won't be cheap considering the weight of some of these items. Again, these are all new in the box (crank is still in the original bag) so it's a good chance to save a few bucks on these parts. All the prices are listed on the links, so make me an offer I can't refuse.

THADURTYBIRD

do you have a part number for the lifters, what are you looking to get for them & would you concider $250?

ScottyRS

iTrader: (2)

CCA-853-16

They cost a bit over $450 new, so $250 is lower than I'd like to go. I'd like to get closer to $350 for them. But I'll consider just about any offer. Thank you.

SteelTownMadDog

iTrader: (2)

How much for the rotating assembly shipped to 14305?

ScottyRS

iTrader: (2)

The rotating assembly may be sold locally. I'll let you know if it doesn't go through.

wesilva

iTrader: (35)

If you can ship the lifters to 87108 for $350, I'll take them.

ScottyRS

iTrader: (2)

PM sent.

ScottyRS

iTrader: (2)

• Eagle forged steel 3.75" crankSOLD
• Scat forged steel 5.7" connecting rods (p/n 2-ICR5700-7/16)SOLD
• SRP forged aluminum flat-top pistons (set of 8 with wrist pins and rings)SOLD
• Comp Cams retro-fit hydraulic roller lifters (link bars not pictured)PENDING
• Comp Cams custom grind retro-fit small circle base cam
• Comp Cams timing chain set

Here are the specs for the cam:
Duration @ .050: 236 Intake - 242 Exhaust
Valve Lift: .520 Intake - .540 Exhaust
Lobe Separation: 106

ScottyRS

iTrader: (2)

• Eagle forged steel 3.75" crankSOLD
• Scat forged steel 5.7" connecting rods (p/n 2-ICR5700-7/16)SOLD
• SRP forged aluminum flat-top pistons (set of 8 with wrist pins and rings)SOLD
• Comp Cams retro-fit hydraulic roller lifters (link bars not pictured)SOLD
• Comp Cams custom grind retro-fit small circle base cam
• Comp Cams timing chain set

Here are the specs for the cam:
Duration @ .050: 236 Intake - 242 Exhaust
Valve Lift: .520 Intake - .540 Exhaust
Lobe Separation: 106

bradley23150

iTrader: (10)

Price of Timing chain set to 33635? Thanks.

ScottyRS

iTrader: (2)

Someone else is awaiting price quote on that already. If it doesn't go through, I'll contact you. Though I'm asking in the neighborhood of $20.

bradley23150

iTrader: (10)

Alright, Let me know.
I Might be interested in that cam as well.. I was told I may need something with a small circle base, if I wanted to make a 383? Any info on this? Pm me, Thanks!