Superfueler with (3) 55lb injectors
11-14-2009, 09:15 PM
#1
Supreme Member
Thread Starter
iTrader: (33)
Join Date: Jul 2000
Location: Boosted Land
Posts: 5,945
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Z28
Engine: Boosted LSX
Superfueler with (3) 55lb injectors
As the title says.
Its a TPI Superfueler. ONLY the ADAPTER PLATE AND INJECTORS.
Delphi Multec 1 Flow-Matched Sets
55 lb / hr Injectors
Static Flow Rate @ 43.5 PSI (300KPa) = 55.0 lb/hr / 6.9 gm/sec / 578 cc/min
Static Flow Rate @ 58.0 PSI (400KPa) = 63.5 lb/hr / 7.97 gm/sec / 667 cc/min
Dynamic Flow Rate @ 43.5 PSI = 1.34 gm/pulse - 2.5ms pulse width and 10ms repetition rate
NO, lines/harness or controller
$125shipped
Its a TPI Superfueler. ONLY the ADAPTER PLATE AND INJECTORS.
Delphi Multec 1 Flow-Matched Sets
55 lb / hr Injectors
Static Flow Rate @ 43.5 PSI (300KPa) = 55.0 lb/hr / 6.9 gm/sec / 578 cc/min
Static Flow Rate @ 58.0 PSI (400KPa) = 63.5 lb/hr / 7.97 gm/sec / 667 cc/min
Dynamic Flow Rate @ 43.5 PSI = 1.34 gm/pulse - 2.5ms pulse width and 10ms repetition rate
NO, lines/harness or controller
$125shipped
Last edited by FSTFBDY; 11-16-2009 at 03:40 PM. Reason: SOLD
11-16-2009, 02:01 AM
#6
Re: Superfueler with (3) 55lb injectors
It's a sandwich plate that goes between the TB and manifold, you'll need a superfueler controller & injector driver to control the injectors. They offer added fuel under boost applications. I have a superfueler system but w/ an LS1 plate and 1 injector...this is just what I needed 
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
thejimsterz28
Engine/Drivetrain/Suspension Parts for Sale
4
09-15-2015 04:37 PM
