parting out 87 Z
09-05-2010, 06:12 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Fayetteville NC
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Iroc
Engine: 350
Transmission: Tremec Tko
Axle/Gears: 3.42
parting out 87 Z
Looking for interest in the following parts, if not listed just email.
GM crate 350 with vortec heads, vortec intake AS&M runners, Edelbrock WP, 24# injectors, stock TB with airfoil. 22,000 miles on bottom end, 10,000 miles on top end. $1,700 Sold
Complete TREMEC TKO, centerforce clutch, Spohn crossmember, less than 20,000 miles. $1,500
Spohn lower control arms and adj. panhard. make offer Sold
SLP 1 5/8 headers, coated but showing signs of surface rust. make offer
9 bolt rear complete 3.42 gears, good condition
Centerline Dagger wheels 17x9 rears, 17x8 front. Need to be polished, no road rash. Kumho tires 25 percent tread. $700
96 firebird leather seats, no tears, drivers seat back frame slightly bent. $150 Sold
Good fenders, hood, doors, hatch.
Let me know if you are looking for anything else.
GM crate 350 with vortec heads, vortec intake AS&M runners, Edelbrock WP, 24# injectors, stock TB with airfoil. 22,000 miles on bottom end, 10,000 miles on top end. $1,700 Sold
Complete TREMEC TKO, centerforce clutch, Spohn crossmember, less than 20,000 miles. $1,500
Spohn lower control arms and adj. panhard. make offer Sold
SLP 1 5/8 headers, coated but showing signs of surface rust. make offer
9 bolt rear complete 3.42 gears, good condition
Centerline Dagger wheels 17x9 rears, 17x8 front. Need to be polished, no road rash. Kumho tires 25 percent tread. $700
96 firebird leather seats, no tears, drivers seat back frame slightly bent. $150 Sold
Good fenders, hood, doors, hatch.
Let me know if you are looking for anything else.
Last edited by likeistoleit; 02-07-2011 at 05:37 PM.
09-05-2010, 07:15 PM
#2
Junior Member
iTrader: (3)
Join Date: Nov 2007
Location: Ft. Benning GA/Palm Bay FL
Posts: 98
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1989 Camaro
Engine: 355
Transmission: 700r4
Axle/Gears: 9 bolt 3.45
Re: parting out 87 Z
interested in the 9 bolt. how much and are you sure its 3.42. i thought they were 3.45. but very interested i would love to have another one
09-05-2010, 10:13 PM
#3
Member
iTrader: (16)
Join Date: Dec 2006
Location: TX/FL
Posts: 469
Likes: 0
Received 1 Like
on
1 Post
Car: 88 GTA/86 C20 Burb/91 325i
Engine: L98/454/M20
Transmission: 700R4/NV4500/Getrag
Axle/Gears: 3.27 9-bolt/3.73 14 Bolt/3.73 IRS
Re: parting out 87 Z
Would you be interested in splitting the short block from the intake and heads? I'm interested in the vortec heads and TPI intake for a vortec TPI build I'm trying to get together.
Thanks,
-Levi
Thanks,
-Levi
09-22-2010, 03:53 AM
#5
Junior Member
Join Date: Jun 2010
Location: Tyro va
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Z/28...many more !
Engine: LY6 / pro charger
Transmission: 4L70E 5000 stall
Axle/Gears: Moser 9" 3.89 gear
Re: parting out 87 Z
i too am looking at the headers ! are you in MD ? call me at 434-277-9135 or 434-944-7383 pete also i would like to get a 5 speed in my car
09-25-2010, 03:01 AM
#6
Member
iTrader: (1)
Join Date: Oct 2009
Location: Mountlake Terrace, Wa
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Iroc + 83 Firebird
Engine: Iroc 305 TPI, Firebird 305 4bbl
Transmission: 700r4 in both.
Axle/Gears: Iroc 3.27 Firebird 3.23
Re: parting out 87 Z
got power door panels?
Trending Topics
02-02-2011, 05:18 PM
#8
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Fayetteville NC
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Iroc
Engine: 350
Transmission: Tremec Tko
Axle/Gears: 3.42
Re: parting out 87 Z
Sorry about the time lapse, I was deployed. I still have the headers if you are interested
02-02-2011, 05:19 PM
#9
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Fayetteville NC
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Iroc
Engine: 350
Transmission: Tremec Tko
Axle/Gears: 3.42
Re: parting out 87 Z
Sorry about the time lapse I was deployed, I still have the rear if your interested.
02-02-2011, 09:51 PM
#13
Re: parting out 87 Z
pics of the leather seats??
Looking for interest in the following parts, if not listed just email.
GM crate 350 with vortec heads, vortec intake AS&M runners, Edelbrock WP, 24# injectors, stock TB with airfoil. 22,000 miles on bottom end, 10,000 miles on top end. $1,700
Complete TREMEC TKO, centerforce clutch, Spohn crossmember, less than 20,000 miles. $1,500
Spohn lower control arms and adj. panhard. make offer
SLP 1 5/8 headers, coated but showing signs of surface rust. make offer
9 bolt rear complete 3.42 gears, good condition
Centerline Dagger wheels 17x9 rears, 17x8 front. Need to be polished, no road rash. Kumho tires 25 percent tread. $700
96 firebird leather seats, no tears, drivers seat back frame slightly bent. $150
Good fenders, hood, doors, hatch.
Let me know if you are looking for anything else.
GM crate 350 with vortec heads, vortec intake AS&M runners, Edelbrock WP, 24# injectors, stock TB with airfoil. 22,000 miles on bottom end, 10,000 miles on top end. $1,700
Complete TREMEC TKO, centerforce clutch, Spohn crossmember, less than 20,000 miles. $1,500
Spohn lower control arms and adj. panhard. make offer
SLP 1 5/8 headers, coated but showing signs of surface rust. make offer
9 bolt rear complete 3.42 gears, good condition
Centerline Dagger wheels 17x9 rears, 17x8 front. Need to be polished, no road rash. Kumho tires 25 percent tread. $700
96 firebird leather seats, no tears, drivers seat back frame slightly bent. $150
Good fenders, hood, doors, hatch.
Let me know if you are looking for anything else.
02-03-2011, 06:13 PM
#15
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Fayetteville NC
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Iroc
Engine: 350
Transmission: Tremec Tko
Axle/Gears: 3.42
Re: parting out 87 Z
I will be taking them out this weekend, will post pics then.
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
11-14-2015 12:02 AM
