[NH] Edelbrock Perf. RPM Airgap, Carb, pump, etc
10-13-2010, 12:23 PM
#1
TGO Supporter/Moderator
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,732
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Edelbrock Perf. RPM Airgap, Carb, pump, etc
This stuff for the most part is lightly used. The intake I bought from a forum member who I don't think even used it, the carb came off a car I bought off a friend who drove it maybe 6 months, the fuel pump I bought brand new like 6 months ago, and the calibration kit is not even opened. (have not changed the jetting on the carb from stock).
Edelbrock 7501 performer RPM 'air gap' manifold. ($220 new) $110
Edelbrock 1407 750cfm carb Manual choke. ($280 new) $150
Edelbrock 1721 fuel pump 110 GPH with #1797 bottom feed plate ($95 + $26 new) $50
Eedelbrock 1480 carb calibration kit, unopened ($47 new) $40
That is $668 worth of parts! Package deal. $300.
Do the math!!
Shipping extra.
Reply here if interested.
-- Joe
Edelbrock 7501 performer RPM 'air gap' manifold. ($220 new) $110
Edelbrock 1407 750cfm carb Manual choke. ($280 new) $150
Edelbrock 1721 fuel pump 110 GPH with #1797 bottom feed plate ($95 + $26 new) $50
Eedelbrock 1480 carb calibration kit, unopened ($47 new) $40
That is $668 worth of parts! Package deal. $300.
Do the math!!
Shipping extra.
Reply here if interested.
-- Joe
11-30-2010, 11:01 AM
#2
TGO Supporter/Moderator
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,732
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Re: Edelbrock Perf. RPM Airgap, Carb, pump, etc
Intake and fuel pump sold.
Carb and calibration kit available.
-- Joe
Carb and calibration kit available.
-- Joe
01-07-2011, 08:44 PM
#3
TGO Supporter/Moderator
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,732
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Re: Edelbrock Perf. RPM Airgap, Carb, pump, etc
ttt
01-09-2011, 09:32 AM
#4
Member
iTrader: (7)
Join Date: Nov 2010
Location: portland, michigan
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 iroc-z28
Engine: 049 headed bbc 4?? C.I.D
Transmission: T56
Axle/Gears: 3:73 posi
Re: Edelbrock Perf. RPM Airgap, Carb, pump, etc
is the carb mechanical secondaries?
01-12-2012, 11:04 PM
#6
Member
iTrader: (4)
Join Date: Jun 2004
Location: Cleveland, OH
Posts: 192
Received 0 Likes
on
0 Posts
Car: '70 Chevelle, '63 Corvette
Engine: 383, 327
Transmission: B&M 700r4, Muncie M-21
Re: Edelbrock Perf. RPM Airgap, Carb, pump, etc
Joe,
I'd be pretty interested in buying the carb. However, I was wondering if you could verify something. I've bought two used 1407's and they were both missing a couple small, unobtainable pieces. Note the little brass tube in the attached picture (near the screwdriver), and note how it is missing on my piece. Are they intact on yours?
Thanks,
-Dave
I'd be pretty interested in buying the carb. However, I was wondering if you could verify something. I've bought two used 1407's and they were both missing a couple small, unobtainable pieces. Note the little brass tube in the attached picture (near the screwdriver), and note how it is missing on my piece. Are they intact on yours?
Thanks,
-Dave
01-13-2012, 05:13 AM
#7
TGO Supporter/Moderator
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,732
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Re: Edelbrock Perf. RPM Airgap, Carb, pump, etc
Joe,
I'd be pretty interested in buying the carb. However, I was wondering if you could verify something. I've bought two used 1407's and they were both missing a couple small, unobtainable pieces. Note the little brass tube in the attached picture (near the screwdriver), and note how it is missing on my piece. Are they intact on yours?
Thanks,
-Dave
I'd be pretty interested in buying the carb. However, I was wondering if you could verify something. I've bought two used 1407's and they were both missing a couple small, unobtainable pieces. Note the little brass tube in the attached picture (near the screwdriver), and note how it is missing on my piece. Are they intact on yours?
Thanks,
-Dave
I forgot to update this thread a while back when I sold everything. It's a moot point now I guess, but I don't remember if the brass tube was missing or attached.
-- Joe
Trending Topics
01-13-2012, 11:09 AM
#8
Member
iTrader: (4)
Join Date: Jun 2004
Location: Cleveland, OH
Posts: 192
Received 0 Likes
on
0 Posts
Car: '70 Chevelle, '63 Corvette
Engine: 383, 327
Transmission: B&M 700r4, Muncie M-21
Re: Edelbrock Perf. RPM Airgap, Carb, pump, etc
Doh -- thats what I get for browsing this stuff late at night. I probably saw the month and day of the last couple posts, but didnt realize it was last year.. Reading comprehension *fail*
-Dave
-Dave
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
09-17-2020 08:26 AM
theshackle
Tech / General Engine
4
03-05-2017 06:37 PM
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
08-17-2015 02:00 PM
