[IL] No Longer Needed New Parts
10-17-2010, 09:39 PM
#1
Want a title? Post!
Thread Starter
Join Date: Nov 2009
Location: Northern IL and Northern VA
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
No Longer Needed New Parts
Hi, I was working on a LS ThirdGen project, that unfortunately is taking it's place on a backburner for awhile. So I'm looking to sell some of the parts I have, they are all new.
I have a full set of AutoMeter Lunar Gauges that were used in a display at one point and time, never been mounted in a car! I'd like to sell these as a set, they work well with one of those Covan's Classic gauge clusters(Never bought one, was going to make my own) There's a tiny amount of wear on the bezel rings around the gauge from being mounted, its very minor but I wanted to mention it. Note: These are electronic Gauges!
Here's a list:
3-3/8" 160 MPH Speedometer
3-3/8" 10,000 RPM Tachometer
2-1/16 Oil Pressure, Water Temp, Fuel Level, and Volt Gauges
Electronic Speedometer Sender Unit
$500 Shipped, Includes all gauges and hardware
Next, I have a set of Wilwood Dynalite Pro Series Solid Rotor High Performance Brakes, Front and Rear Sets. These are the full kits, the rear brakes have the built in emergency brake for a street car. 4 piston calipers. In the box.
$1200 Local Pickup in Northern IL or add shipping from 61071 to your dest.
Also have Replica 10 Spoke Chrome Z06 Corvette Wheels. Sizes are 2 18X9.5" wheels and 2 17X8.5" w/a 5 X 4.75" Bolt Pattern. Still in the box. Bought from Lake Shore Wheel & Tire if you want to check them out.
$800 for the set picked up in Northern IL, or add shipping from 61071 to your location.
Also have an SLP LS Series Timing Chain/Oil Pump set, never opened never used.
$300 Shipped
I have pics of everything listed. Please PM me if interested and we can work things out. I prefer Cashiers Check or Money Order for payment.
Thanks for looking!
Some pics: http://s1098.photobucket.com/albums/g364/Arctictech117/
I have a full set of AutoMeter Lunar Gauges that were used in a display at one point and time, never been mounted in a car! I'd like to sell these as a set, they work well with one of those Covan's Classic gauge clusters(Never bought one, was going to make my own) There's a tiny amount of wear on the bezel rings around the gauge from being mounted, its very minor but I wanted to mention it. Note: These are electronic Gauges!
Here's a list:
3-3/8" 160 MPH Speedometer
3-3/8" 10,000 RPM Tachometer
2-1/16 Oil Pressure, Water Temp, Fuel Level, and Volt Gauges
Electronic Speedometer Sender Unit
$500 Shipped, Includes all gauges and hardware
Next, I have a set of Wilwood Dynalite Pro Series Solid Rotor High Performance Brakes, Front and Rear Sets. These are the full kits, the rear brakes have the built in emergency brake for a street car. 4 piston calipers. In the box.
$1200 Local Pickup in Northern IL or add shipping from 61071 to your dest.
Also have Replica 10 Spoke Chrome Z06 Corvette Wheels. Sizes are 2 18X9.5" wheels and 2 17X8.5" w/a 5 X 4.75" Bolt Pattern. Still in the box. Bought from Lake Shore Wheel & Tire if you want to check them out.
$800 for the set picked up in Northern IL, or add shipping from 61071 to your location.
Also have an SLP LS Series Timing Chain/Oil Pump set, never opened never used.
$300 Shipped
I have pics of everything listed. Please PM me if interested and we can work things out. I prefer Cashiers Check or Money Order for payment.
Thanks for looking!
Some pics: http://s1098.photobucket.com/albums/g364/Arctictech117/
Last edited by Arctictech117; 10-31-2010 at 01:20 AM. Reason: Changed Price
Trending Topics
11-02-2010, 12:57 PM
#10
Supreme Member
iTrader: (35)
Join Date: Aug 2006
Location: Mississauga,Ont,Canada
Posts: 1,470
Likes: 0
Received 1 Like
on
1 Post
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: No Longer Needed New Parts
will the brakes work with stock 16 inch rims at all???
11-02-2010, 04:58 PM
#11
Junior Member
Join Date: Jul 2009
Location: Clovis, Ca
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 Z-28 (Cert 8.50)
Engine: 416 LS3 / 1050cfm
Transmission: Powerglide w/brake
Axle/Gears: 9" 4.86, 4-link
Re: No Longer Needed New Parts
What's the Wilwood part number for the front brakes?
11-03-2010, 12:12 PM
#12
Member
Join Date: Dec 2007
Location: mattoon illinois
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92camaro,86 camaro
Engine: 355
Transmission: 700r4
Re: No Longer Needed New Parts
will the wells fit on my 92 with out spacers and do they come with tires?
will you trade for my 20 in wheels (not for camaro they for ford or dodge small bolt patern)
will you trade for my 20 in wheels (not for camaro they for ford or dodge small bolt patern)
11-04-2010, 10:22 PM
#13
Want a title? Post!
Thread Starter
Join Date: Nov 2009
Location: Northern IL and Northern VA
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Re: No Longer Needed New Parts
Brakes should fit inside of a 15" wheel and be able to be put in without spacers. Here's a link to Wilwood's specs on the front brakes, should answer all your questions more definitively than I can. Part # is on the site.
Front Brakes: http://www.wilwood.com/BrakeKits/Bra...emno=140-11012
I'll have to check which rear end I bought the rear brakes for, whether it was for a 4th gen rear or just a standard 12 bolt.
As far as the spacers are concerned:
If you've got a standard 3rd gen rear end and front wheels, then yes you will need a spacer. The backspacing on the front wheels are 54mm and the back wheels are 57mm. With a 4th gen rear it isn't an issue.
Here's a link to more info on spacing and wheel adapters:
http://www.skulte.com/adapterfaq.html
Thanks for the trade offer, but I'm only interested in a sale at this time. Also, thanks for the interest!
Front Brakes: http://www.wilwood.com/BrakeKits/Bra...emno=140-11012
I'll have to check which rear end I bought the rear brakes for, whether it was for a 4th gen rear or just a standard 12 bolt.
As far as the spacers are concerned:
If you've got a standard 3rd gen rear end and front wheels, then yes you will need a spacer. The backspacing on the front wheels are 54mm and the back wheels are 57mm. With a 4th gen rear it isn't an issue.
Here's a link to more info on spacing and wheel adapters:
http://www.skulte.com/adapterfaq.html
Thanks for the trade offer, but I'm only interested in a sale at this time. Also, thanks for the interest!
05-29-2011, 12:41 PM
#15
Junior Member
Join Date: Sep 2009
Location: Kalamazoo, MI
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC-Z28 Camaro
Engine: 350 carbureted (swap from 305 TPI)
Transmission: 700R4 rebuilt with shift kit
Axle/Gears: 3.42
Re: No Longer Needed New Parts
I would be willing to buy 3 of the guages if the price was right but I know you said you didn't want to split them up. If so though send me a price for the oil pressure, volt, water temp.
-Evan
-Evan
Thread
Thread Starter
Forum
Replies
Last Post