[IL] 383 Stroker/March Performance Serpentine Kit
12-02-2010, 08:39 AM
#1
Senior Member
Thread Starter
Join Date: May 2010
Location: DeKalb, IL
Posts: 838
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2006 Cobalt SS/SC
Engine: LSJ
Transmission: F35 MU3
Axle/Gears: 4.05
383 Stroker/March Performance Serpentine Kit
Small Block Chevy 383ci Stroker:
- Eagle cast steel crank (3.75" stroke)
- Scat forged connecting rods
- Sealed Power flat-top hypereutectic pistons (0.030" over and 10.4:1 CR)
- Lunati Voodoo Hydraulic Flat-Tappet Cam (PN 60103) with an RPM range of 1,800-6,200, advertised duration of 268/276, duration @ 0.050" of 227/233, and a gross valve lift of 0.489/0.504
- Edelbrock Victor Jr. Cylinder Heads with 215cc intake runners and 64cc combustion chambers
- Comp Cams Magnum pushrods
- Aluminum 1.5 ratio rocker arms
- Weiand single-plane aluminum intake manifold, NOT INSTALLED
- ARP fasteners throughout
- Moroso 6qt oil pan for 1982-92 Camaro/Firebird (may fit other applications)
- March Performance Revolver Serpentine Kit, polished and clear-powdercoated, with 105 amp alternator and power-steering pump
- High-torque Mini-Starter, NOT INSTALLED
The engine has not been on the dyno, but best guess is the engine was pushing at least 400-450hp with an Edelbrock high-flow TPI intake manifold.
I'm asking $4,000 OBO.
I am also willing to separate the serpentine kit from the engine.
If you want just the engine, I’m asking $3,000 OBO.
If you want just the serpentine kit, I’m asking $1,400 OBO.
The engine is located near Serena, IL. If interested, PM me. If you want pix, I can e-mail them to you.
- Eagle cast steel crank (3.75" stroke)
- Scat forged connecting rods
- Sealed Power flat-top hypereutectic pistons (0.030" over and 10.4:1 CR)
- Lunati Voodoo Hydraulic Flat-Tappet Cam (PN 60103) with an RPM range of 1,800-6,200, advertised duration of 268/276, duration @ 0.050" of 227/233, and a gross valve lift of 0.489/0.504
- Edelbrock Victor Jr. Cylinder Heads with 215cc intake runners and 64cc combustion chambers
- Comp Cams Magnum pushrods
- Aluminum 1.5 ratio rocker arms
- Weiand single-plane aluminum intake manifold, NOT INSTALLED
- ARP fasteners throughout
- Moroso 6qt oil pan for 1982-92 Camaro/Firebird (may fit other applications)
- March Performance Revolver Serpentine Kit, polished and clear-powdercoated, with 105 amp alternator and power-steering pump
- High-torque Mini-Starter, NOT INSTALLED
The engine has not been on the dyno, but best guess is the engine was pushing at least 400-450hp with an Edelbrock high-flow TPI intake manifold.
I'm asking $4,000 OBO.
I am also willing to separate the serpentine kit from the engine.
If you want just the engine, I’m asking $3,000 OBO.
If you want just the serpentine kit, I’m asking $1,400 OBO.
The engine is located near Serena, IL. If interested, PM me. If you want pix, I can e-mail them to you.
12-24-2010, 10:25 AM
#4
Senior Member
Thread Starter
Join Date: May 2010
Location: DeKalb, IL
Posts: 838
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2006 Cobalt SS/SC
Engine: LSJ
Transmission: F35 MU3
Axle/Gears: 4.05
Re: 383 Stroker/March Performance Serpentine Kit
If you want pics, I'll need your e-mail address.
Trending Topics
05-01-2011, 05:10 PM
#8
Re: 383 Stroker/March Performance Serpentine Kit
I'm interested in the engine. and in illinois. Please send me pics to stingrayguy1@yahoo.com engine been run? tell me more please!
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Tech / General Engine
22
01-09-2020 08:29 PM
toronto formula
Engine/Drivetrain/Suspension Parts for Sale
15
11-10-2015 06:17 AM
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
09-02-2015 02:45 PM
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
5
09-01-2015 04:32 PM
383, 383stroker, camaro, chevy, classified, engine, gen, hypereutectic, illinois, kit, kits, march, performance, revolver, sale, serpentine, stroker
