TBI manifolds
04-13-2012, 08:36 PM
#1
Member
Thread Starter
Join Date: Dec 2001
Location: NH
Posts: 243
Likes: 0
Received 1 Like
on
1 Post
Car: 93 9C1 Caprice
Engine: 5.7
Transmission: 700R4
Axle/Gears: 3:42
TBI manifolds
Have 3 different TBI manifolds for sale.
NIB Vortec TBI by Edelbrock. This was originally made for Marauder Marine. 2" bores and no EGR. Same casting # 3704 as the 'newer' Vortec manifold. $200
Add GM silicone manifold/head gaskets for $20.
Bored stock manifold. 2.030" diameter. real deal, not a hack job. #14102182. $50
Last one I don't expect much interest in but it was an interesting project.
Edelbrock Performer RPM manifold. Top was machined down for clearance and a 2" bore TBI adapter was welded on. Distributor hole was machined for Caprice distributor. I ran this with BB TBI for 3 years before putting the stock set-up back on. $50. I can post pics if you think you want it.
Derry, NH
Have pics but they are too big to attach. Drop me a PM if interested and I'll send you the pics.
NIB Vortec TBI by Edelbrock. This was originally made for Marauder Marine. 2" bores and no EGR. Same casting # 3704 as the 'newer' Vortec manifold. $200
Add GM silicone manifold/head gaskets for $20.
Bored stock manifold. 2.030" diameter. real deal, not a hack job. #14102182. $50
Last one I don't expect much interest in but it was an interesting project.
Edelbrock Performer RPM manifold. Top was machined down for clearance and a 2" bore TBI adapter was welded on. Distributor hole was machined for Caprice distributor. I ran this with BB TBI for 3 years before putting the stock set-up back on. $50. I can post pics if you think you want it.
Derry, NH
Have pics but they are too big to attach. Drop me a PM if interested and I'll send you the pics.
04-17-2012, 07:35 AM
#2
Member
Join Date: Nov 2004
Location: Houston MS
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 GTA Trans Am
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 10 bolt posi 3.23
Re: TBI manifolds
I am not really interested but I would like the pics.
I was thinking about building a sheet metal manifold so I could run 18 deg heads on my 428 SB I am building. Always like to see how other people think.
I was thinking about building a sheet metal manifold so I could run 18 deg heads on my 428 SB I am building. Always like to see how other people think.
Thread
Thread Starter
Forum
Replies
Last Post
