Parting 1991 Z28 Convertible
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Ft. Benning GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2007 R/T-R package CHARGER!
Parting 1991 Z28 Convertible
Hey All!-
Just got I-net a few days ago. Moved outta the city & cable doesn't run here, so t.v. and I-net was a big p.i.a.... Plus: I had shoulder surgery last month, so I've been on con-leave from work (meaning no computer to use at all)
Sorry for late responses
List updated 7 July
Wiper Motor.
Convertible FRONT Seat Belt (Pass.) Black. Minor fading on buckle. Good Condition. Strong retractors.
Convertible FRONT Seat Belt (Driver) Black. Some fading. Strong lap retractor, shoulder retractor spring is weak- but works.
Convertible 3rd Brakelamp (HMSL) Lens and housing in Great shape. 1 of 2 plastic recepticle plug tabs is broken. Completely usable.
305TPI Fuel Pump/Fuel Tank Sender. Works Excellent- Drove it less than 4wks ago.
Cruise Control Servo
Convertible Rearview Mirror. Has dual Map Lights, harness, and glass mount.
Convertible Sun Visors. Pass side Mirror is cracked. Fabric is in good shape.
Dual Horns. Tested.
Entire SIR system. Air Bag w/ all sensors & Modules
Left Side Rocker
Convertible Tonneau latches w/ solenoids (L&R)
Convertible Spoiler (R)
Instrument cluster. 110mph P/N ND 25088982
(L) Taillamp- Minor chip (not visible in the lens).
(R) Door. PWR L, PWR W, PWR M. Loaded.
Brake Master Cyl.
Brake Booster
Radiator- Modine. Auto Trns. No Leaks. Was filled w/ bright grn CLEAN coolant. In GREAT Shape.
Convertible L Quarter Panel-
(R) Door (loaded)
washer fluid tank w/ pump
coolant overflow tank
Just got I-net a few days ago. Moved outta the city & cable doesn't run here, so t.v. and I-net was a big p.i.a.... Plus: I had shoulder surgery last month, so I've been on con-leave from work (meaning no computer to use at all)
Sorry for late responses
List updated 7 July
Wiper Motor.
Convertible FRONT Seat Belt (Pass.) Black. Minor fading on buckle. Good Condition. Strong retractors.
Convertible FRONT Seat Belt (Driver) Black. Some fading. Strong lap retractor, shoulder retractor spring is weak- but works.
Convertible 3rd Brakelamp (HMSL) Lens and housing in Great shape. 1 of 2 plastic recepticle plug tabs is broken. Completely usable.
305TPI Fuel Pump/Fuel Tank Sender. Works Excellent- Drove it less than 4wks ago.
Cruise Control Servo
Convertible Rearview Mirror. Has dual Map Lights, harness, and glass mount.
Convertible Sun Visors. Pass side Mirror is cracked. Fabric is in good shape.
Dual Horns. Tested.
Entire SIR system. Air Bag w/ all sensors & Modules
Left Side Rocker
Convertible Tonneau latches w/ solenoids (L&R)
Convertible Spoiler (R)
Instrument cluster. 110mph P/N ND 25088982
(L) Taillamp- Minor chip (not visible in the lens).
(R) Door. PWR L, PWR W, PWR M. Loaded.
Brake Master Cyl.
Brake Booster
Radiator- Modine. Auto Trns. No Leaks. Was filled w/ bright grn CLEAN coolant. In GREAT Shape.
Convertible L Quarter Panel-
(R) Door (loaded)
washer fluid tank w/ pump
coolant overflow tank
Last edited by 400HP88IROCCONV; 07-07-2013 at 02:48 PM. Reason: Added pics
Trending Topics
#8
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Ft. Benning GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2007 R/T-R package CHARGER!
Re: Parting 1991 Z28 Convertible
Hey all-
I drove it for the last 7 miles she'll ever see this evening. I took a bunch of pics and a video I'm uploading to photobucket as I'm typing this. After it finishes loading I'll insert it all in the original post at the top of the thread.
I'm trying to get back to all of your PM's as quickly as possible. If you haven't heard back yet either I haven't tested or verified the part your interested in. I'll get most of you replied to tomorrow after I get components removed and get the I.D. numbers off of the parts.
Too bad she's too far gone... it was a nice sunset drive. This is what happens when someone who REALLY wanted a 1991 integra gets a real car instead, & rags it out...
UPDATE The first image is a video of the engine running & so forth, but I can't get it to embed from photobucket as a vid. It only shows up as a pic???
Any Help?
I drove it for the last 7 miles she'll ever see this evening. I took a bunch of pics and a video I'm uploading to photobucket as I'm typing this. After it finishes loading I'll insert it all in the original post at the top of the thread.
I'm trying to get back to all of your PM's as quickly as possible. If you haven't heard back yet either I haven't tested or verified the part your interested in. I'll get most of you replied to tomorrow after I get components removed and get the I.D. numbers off of the parts.
Too bad she's too far gone... it was a nice sunset drive. This is what happens when someone who REALLY wanted a 1991 integra gets a real car instead, & rags it out...
UPDATE The first image is a video of the engine running & so forth, but I can't get it to embed from photobucket as a vid. It only shows up as a pic???
Any Help?
Last edited by 400HP88IROCCONV; 03-28-2013 at 09:19 PM.
#9
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Ft. Benning GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2007 R/T-R package CHARGER!
Re: Parting 1991 Z28 Convertible
Hey all-
We have most of the usable items loose & ready to go.
Complete Engine/Trans assembly w/ all rotating accessories, exhaust manifolds, complete harness, ECU, Distributor, air intake, throttle cable w/ gas pedal, cruise cable- the whole 9 yard. the only thing I removed while pulling it was the distributor so that it didn't get broken against the firewall. I stuck it back in once on the pallet. Delivery within 150miles of Columbus Ga is possible for a fee. If you want it shipped you can arrange your own freight. I'd suggest Uship- freightquote.com is a rip now.
Steering column w/ key & Vats (airbag not included)
Speedo Cluster
Seats- driver's is all power w/ harness & works perfectly.
Misc Convertible parts
We have most of the usable items loose & ready to go.
Complete Engine/Trans assembly w/ all rotating accessories, exhaust manifolds, complete harness, ECU, Distributor, air intake, throttle cable w/ gas pedal, cruise cable- the whole 9 yard. the only thing I removed while pulling it was the distributor so that it didn't get broken against the firewall. I stuck it back in once on the pallet. Delivery within 150miles of Columbus Ga is possible for a fee. If you want it shipped you can arrange your own freight. I'd suggest Uship- freightquote.com is a rip now.
Steering column w/ key & Vats (airbag not included)
Speedo Cluster
Seats- driver's is all power w/ harness & works perfectly.
Misc Convertible parts
#10
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Ft. Benning GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2007 R/T-R package CHARGER!
Re: Parting 1991 Z28 Convertible
Brake Booster, Master cylinder & proportioning Valve (for a drum rear end)
Complete Airbag system. The airbag itself needs a minor vynal repair due to a small shrinkage crack, but the system is fully operable. No codes.
Modine radiator. A few bent foils, but no leaks & in good condition.
Complete Airbag system. The airbag itself needs a minor vynal repair due to a small shrinkage crack, but the system is fully operable. No codes.
Modine radiator. A few bent foils, but no leaks & in good condition.
#12
Junior Member
Join Date: Sep 2005
Location: Wisconsin
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS convertible
Engine: 305 Tb
Transmission: 5 spd soon to be T56 6 speed
Axle/Gears: 3.08 soon to be 4.56
Re: Parting 1991 Z28 Convertible
Interested in decklid... if its almost rust free
563 5421221 text me or call
563 5421221 text me or call
#13
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Ft. Benning GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2007 R/T-R package CHARGER!
Re: Parting 1991 Z28 Convertible
Welter- just sent you a text.
Everyone else: Adding updates to the list now
Everyone else: Adding updates to the list now
Last edited by 400HP88IROCCONV; 03-31-2013 at 07:26 PM.
#14
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Ft. Benning GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2007 R/T-R package CHARGER!
Re: Parting 1991 Z28 Convertible
Hotrodder- payment recieved. As soon as it clears I'll email or text your usps confirmation to you. I'll check the trunk pull down tomorrow after work.
Welter- Call me. I'm cooking dinner- texting sux!
Welter- Call me. I'm cooking dinner- texting sux!
#17
COTM Editor
iTrader: (11)
Join Date: Mar 2006
Location: WINDSOR, CO
Posts: 4,098
Likes: 0
Received 12 Likes
on
12 Posts
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Re: Parting 1991 Z28 Convertible
Did you have my seal? or the latch?
#19
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Ft. Benning GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2007 R/T-R package CHARGER!
Re: Parting 1991 Z28 Convertible
PM's replied.
I didn't get out there this evening (I had prior plans), but I'll be on it with a list of everything ya'll asked about as soon as I get outta work tomorrow.
Brian- I'll get that decklid ready to fly.
Everyone else check your PM's tomorrow evening after 8:30 or so. That gives me time to find, pull, test, take pics, load up, drive home, mabey eat- & then start typing!
I didn't get out there this evening (I had prior plans), but I'll be on it with a list of everything ya'll asked about as soon as I get outta work tomorrow.
Brian- I'll get that decklid ready to fly.
Everyone else check your PM's tomorrow evening after 8:30 or so. That gives me time to find, pull, test, take pics, load up, drive home, mabey eat- & then start typing!
#20
Junior Member
Join Date: Jul 2012
Location: Loganville GA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 IROC Camaro
Engine: 305 TBI
Transmission: 700R4
Re: Parting 1991 Z28 Convertible
im in loganville ga could use the deck lid if it hasnt sold and front lip shoot me a text other small parts i need 770-776-9144
#23
Supreme Member
iTrader: (1)
Join Date: Jan 2000
Location: san jose, ca
Posts: 1,110
Likes: 0
Received 6 Likes
on
6 Posts
Car: 1990 IROC-Z (De-Badged-Carbon Hood)
Engine: Superram 383
Transmission: T-56 w/upgraded Viper Internals
Axle/Gears: 3.73 18x8 and 18x11 irocs
Re: Parting 1991 Z28 Convertible
How much are you asking for the decklid? I need an extra one for a custom carbon fabrication I am attempting.
Let me know ASAP.
Let me know ASAP.
#26
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Ft. Benning GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2007 R/T-R package CHARGER!
Re: Parting 1991 Z28 Convertible
List updated.
Hotrodder & Welter- your stuff shipped today. I'll scan paperwork to you tonight.
Zach/90- PM replied
Hotrodder & Welter- your stuff shipped today. I'll scan paperwork to you tonight.
Zach/90- PM replied
#27
Junior Member
Join Date: May 2012
Location: Dallas, Tx
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 305 V8
Transmission: T-5
Axle/Gears: stock
Re: Parting 1991 Z28 Convertible
How much for wiper motor with module, wiper switch inside the column and horns shipped to Dallas, Tx 75208?
#30
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Ft. Benning GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2007 R/T-R package CHARGER!
Re: Parting 1991 Z28 Convertible
List updated.
Pending payments on a few items.
We're gonna chop up the shell in the next few days. Before I do: Is there any interest in a clean L side quartet panel? I'm gonna have a K12 saw, so it'll be a super clean cut...
Pending payments on a few items.
We're gonna chop up the shell in the next few days. Before I do: Is there any interest in a clean L side quartet panel? I'm gonna have a K12 saw, so it'll be a super clean cut...
#31
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Ft. Benning GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2007 R/T-R package CHARGER!
Re: Parting 1991 Z28 Convertible
List updated-
Still some of the good stuff left.
Several items people asked for and than never replied or paid for are about to reappear on the next update...
Still some of the good stuff left.
Several items people asked for and than never replied or paid for are about to reappear on the next update...
#32
Supreme Member
iTrader: (30)
Join Date: Sep 2005
Location: O'Fallon, MO
Posts: 6,258
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: Parting 1991 Z28 Convertible
How much were you thinking for the quarter panel? And would you be able to ship it?
#33
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Ft. Benning GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2007 R/T-R package CHARGER!
Re: Parting 1991 Z28 Convertible
Shipping will be a minor pain- but not too bad. We'll have to use Uship. None of the usual fedwrex/OOops will work. This has to be handled by a private carrier.
It's also possible to use the "Good ole boy" shipping method... I have a fella from the memphis area coming down this week to get a bunch of stuff. He may agree to haul it as far as he's going. Than you could drive to him for it.
The Quarter is perfect- make me an offer... I'm chopping up the shell this week...
Mike
#36
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Ft. Benning GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2007 R/T-R package CHARGER!
Re: Parting 1991 Z28 Convertible
List Updated.
LAST REMAINING PARTS LISTED!!
Shipped to 92rs and sent some seat belts "Down Unda" Today!
LAST REMAINING PARTS LISTED!!
Shipped to 92rs and sent some seat belts "Down Unda" Today!
#37
Supreme Member
iTrader: (101)
Join Date: Feb 2004
Location: Levittown Pa
Posts: 1,916
Likes: 0
Received 20 Likes
on
18 Posts
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: Parting 1991 Z28 Convertible
Do you have the rear lap belts and the ones that mount under the tonneau?
#39
Junior Member
Join Date: Apr 2013
Location: Ocklawaha, FL
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 25th anniversary RS..Z28 clone
Engine: 5.0L 305ci V8 TBI (soon to be TPI)
Transmission: auto
Re: Parting 1991 Z28 Convertible
How much for the engine, harness, and ecu. Not including shipping I will pick up. I dont need the trans as im swapping over to a 5 speed
#40
Junior Member
Join Date: Sep 2005
Location: Wisconsin
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS convertible
Engine: 305 Tb
Transmission: 5 spd soon to be T56 6 speed
Axle/Gears: 3.08 soon to be 4.56
Re: Parting 1991 Z28 Convertible
Looking for the little plastic piece that in the dash just below the headlight switch.. it's kind of a square
#41
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Ft. Benning GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2007 R/T-R package CHARGER!
Re: Parting 1991 Z28 Convertible
Sry Welter- dash is a memory. All I have left is the cluster..
Last edited by 400HP88IROCCONV; 04-26-2013 at 09:58 AM.
#43
Senior Member
iTrader: (1)
Join Date: Aug 2003
Location: pnw near portland or.
Posts: 506
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 RS convertible
Engine: 330 hp vortec 350. TBI
Transmission: 5 Speed
Axle/Gears: 3.73 Moiser 12 bolt/Wilwood disc's
Re: Parting 1991 Z28 Convertible
I need the Tach if it works rite and the upper rear seat belt trim that mounts as a lid for the body.
Please get back and shipped to 97016
Thanks
Please get back and shipped to 97016
Thanks