When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Quicktime Gen 1 SBC T-56 Scatter Shield/Bell Housing
So I bought the wrong bell housing... I needed one for an ls but I ended up with one for a gen 1 sbc. I already started notching the block plate before I realized that I had the wrong one. Thankfully I didn’t touch the bell housing it self, just the plate. Brand new, comes with all hardware, instructions, stickers. For use with a gen 1 sbc and t-56. Part number is RM-6023. I paid 720+tax, trying to get 600.00 shipped.
Re: Quicktime Gen 1 SBC T-56 Scatter Shield/Bell Housing
Originally Posted by garage_engineer
Do you know if this requires any modifications to the transmission tunnel?
Thanks,
Matt
Don’t think so. I installed the correct one in my car with nothing more than a bit of notching in that area in the photo to clear the driver side header. There’s absolutely no interference with the tunnel at all.
08-15-2019, 03:48 PM
