WTB/WTT for intake, headers, carburetor, TV bracket, lockup kit ,Mallory 4309
03-16-2008, 11:42 PM
#1
Member
Thread Starter
iTrader: (4)
Join Date: Sep 2007
Location: Kell, IL
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
WTB/WTT for intake, headers, carburetor, TV bracket, lockup kit ,Mallory 4309
Hi. Im wanting to do a carburetor swap on my 305 til I can get a 350 built. Didnt know if anyone had anything they wanted to part with. Im looking for an Edelbrock Performer/ Performer RPM intake, a 700r4 lockup kit, a Mallory 4309 fuel pressure regulator, full length headers for a 3rd gen, Edelbrock Performer 600cfm carb or Holley's equivalent as well as a TV cable bracket for whatever carb I use so I can use my overdrive
Ive got some parts I could probably trade for these.
First Ive got 8 radios total besides the one in my car. 4 of them fit the pre '89 cars and 4 of them fit 89+ cars. The first column of radios in the picture is pre '89 and the second column is 89+. Ive got a bunch of **** sets also. Just not in the pic. Ive got black, grey, and black with aluminum *****. I can probably solder in an iPod input for you as well and either put it in the face of the radio or have it come out the back so you can run it to the console or wherever. Id need some time of course to do the work
Ive got a setup in my basement to test the radios out and have it hooked up to front and rear speakers from a third gen, so I know whether or not the radios will work before I ship or solder in the input for that matter
Ive also got:
Seats from an '86 with the lap belt, theyre grey and in okay shape. The back seats are good, but the front seats are a little dirty with the driver side being the worst of them all.
2 working fans for a heater/ ac unit. Both have good motors, but one only has a good fan rotor. For the other one, youd have to change the squirrel cage fan over.
Set of t-tops removed from an '89 TA with the black crossmember as well as some screws and the black latches that the t-tops lock onto
Dash minus the cluster and bezel. Has one crack on the side of a middle vent but can be repaired easily
Door panels grey in color from an '86 I believe
Inside door pulls light grey in color from '86
Complete set of bay plastics grey in color as well as the lap belt plastic trim
Other pics available upon request
Ive got some parts I could probably trade for these.
First Ive got 8 radios total besides the one in my car. 4 of them fit the pre '89 cars and 4 of them fit 89+ cars. The first column of radios in the picture is pre '89 and the second column is 89+. Ive got a bunch of **** sets also. Just not in the pic. Ive got black, grey, and black with aluminum *****. I can probably solder in an iPod input for you as well and either put it in the face of the radio or have it come out the back so you can run it to the console or wherever. Id need some time of course to do the work
Ive got a setup in my basement to test the radios out and have it hooked up to front and rear speakers from a third gen, so I know whether or not the radios will work before I ship or solder in the input for that matter
Ive also got:
Seats from an '86 with the lap belt, theyre grey and in okay shape. The back seats are good, but the front seats are a little dirty with the driver side being the worst of them all.
2 working fans for a heater/ ac unit. Both have good motors, but one only has a good fan rotor. For the other one, youd have to change the squirrel cage fan over.
Set of t-tops removed from an '89 TA with the black crossmember as well as some screws and the black latches that the t-tops lock onto
Dash minus the cluster and bezel. Has one crack on the side of a middle vent but can be repaired easily
Door panels grey in color from an '86 I believe
Inside door pulls light grey in color from '86
Complete set of bay plastics grey in color as well as the lap belt plastic trim
Other pics available upon request
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
11-14-2015 12:02 AM
