Theman0188

iTrader: (3)

Hey guys, I need a few parts so I can finish up my 9 bolt posi swap. I need a good axle, just for my passenger side, since mine on that side is bent. (wheel on pass. side doesnt roll right. and also the parking brake attachment mechanism on the Driver side. This is basically a peice that bolts on to the caliper which holds the spring and the part that the cable attaches to.(need the bolts included in that mechanism) I was hoping someone had these random parts and didn't need them anymore.
Thanks,
Wes

TransAM Joe

iTrader: (6)

I have bracket and bolt, this came off Moraine caliper, is this the one you need and do you need the arm with weight also?

Let me know

If my 9 bolt complete doesn't sell soon I will part it out and have an axle for you.

Theman0188

iTrader: (3)

PM sent

TransAM Joe

iTrader: (6)

pics of brackets

Theman0188

iTrader: (3)

Still need all parts.. the ones in the mechanism (needed for driver side) in the pics doesn't look like the one I have on the passenger side... And still need an axle on passenger side.

Theman0188

iTrader: (3)

Bump... Still need this stuff. Definitely need that axle if nothing else

TransAM Joe

iTrader: (6)

sorry guys all parts are sold.

Theman0188

iTrader: (3)

BUMP - Still needed

Theman0188

iTrader: (3)

another BUMP

ReEntry Racer

I have 9-bolt axles, but the shipping would kill you!

Theman0188

iTrader: (3)

haha yeah probably so. I am pretty desperate for one. I can only find one anywhere and that is ebay, only problem is the guy is out of the office and keeps postponing his return date.

ReEntry Racer

Is the Pass. side the long one or the short one? I used to run a nine bolt in my IROC but its been 6 years since I sold it. The axle collection is still buried in my storage area though!

Theman0188

iTrader: (3)

I have been trying to research the difference in lengths, but I can't find anything except the fact that one is longer than the other, and the part number to the passenger side is 10033572.

ReEntry Racer

I have an OEM '89 Camaro Manual and it may tell which is which. I'll dig it out and have a look for you.

Theman0188

iTrader: (3)

sweet, well about how bad do you think shipping will be? Just so I am prepared

ReEntry Racer

OK, I dragged the OEM Camaro manual out of storage, and the two sets of axles.
Here's the deal:
-- The passenger side is the longer one - see the casting number suffix in the wheel attach flange hub - 928
-- The driver side has the same prefix but the suffix is - 927
I checked the manual and there is a good full page drawing of the whole assy. and it clearly shows the driver side is shorter.

I checked my axles and this is what I have:

#1 Set (L&R) has good bearing cones, inner bearing stop/retainers, outer bearing retainer plates and has had all wheel studs replaced with longer (OEM metric) ARP studs. These are from my '89 IROC (road) race car spare rear I had when I sold the car in 2004.

#2 Set (L&R) same as above but has had all studs removed. I have no real history on this set but they look as good as #1 set. I picked them up from a friend who was converting to a 4th gen GM 10 bolt.

I may have other parts for the BW rear but really don't want to dig further unless you give me reason to!

ReEntry Racer

There is two ways to go:

#1 - I ship from Canada via FedEx or UPS -- Probably huge bucks.
#2 - I ship from WA state after taking them across the border first.

I don't know what the deal will be if I show up at US Customs with a package the size and weight of a machine gun barrel. I have never exported to the US this way and it could be a PITA.

Better that you keep looking locally I think! And I probably should keep these as sets, I suppose.

Theman0188

iTrader: (3)

yeah i agree haha, that seems like more trouble than it's worth. I do really appreciate the information on the lengths that you provided, so thanks for your help!

Z28ricer

iTrader: (2)

Have the axle, can do $90 shipped, lemme know if that works for you.

Theman0188

iTrader: (3)

pm sent!

Theman0188

iTrader: (3)

no reply so still looking

Theman0188

iTrader: (3)

another BUMP!

91camarosRS

iTrader: (5)

I got one!

Theman0188

iTrader: (3)

Pm sent!

86 Money Pit

If this falls through give me a shout, I have decided to go with a 9" and have a complete 9 bolt sitting (in the way) in the garage. It is in pretty rough shape so I don't think it is worth a huge pile of money complete so I might be willing to take the parts off it and scrape the rest. let me know...

Theman0188

iTrader: (3)

Thanks for the reply. I got the axle covered, however, i still need the parking brake mechanism on the driver's side caliper, if your not using them.

86 Money Pit

I think I will pass. If I could have sold the axles too I think I could have recouped some of my costs and scrapped the rest. I don't want to tear it down for nickle & dime parts as I think it would be much harder to sell this unit incomplete.

Good luck with your search.

l_dis_travlr

Is the p-b mechanism still an issue?

I have a very rusty old caliper, that you could probably cut/grind
off the parts needed. If its not the correct side, I may have the
other one laying around somewhere else. If needed, I can provide pics.

Good luck,
kk

Theman0188

iTrader: (3)

actually i ended up finding a 4th gen posi rear with 3.42s the other day at the local U-Pull-It. took brakes and all for $100! it was in a v6 car. Needless to say I'm done with the borg warner rear.. its been the biggest pain in the butt... new housing, (setting it up inside new housing) remanufactured brakes, replacing an axle, and the problem now was gear whine.. but thanks for trying to help

MartinD

iTrader: (1)

did you make it right with the guy in the feedback forum?

l_dis_travlr

Re: Feedback Forum

Oh yes indeed, the record has been set straight.
Be sure to go check it all out.

https://www.thirdgen.org/forums/clas...stay-away.html

https://www.thirdgen.org/forums/clas...ml#post5099458


And thanks for pointing this out, as something that needed attention.

kk

White'89

iTrader: (8)

I'm in need of a drivers side 9 bolt axle if anyone here has anything left.

ReEntry Racer

I do have 2 of those. One has no wheel studs, the other has extra long ARP metric racing studs installed. Both have the axle bearing and keeper ring installed. I am in Canada though, so shipping will be worth as much as the axle(s) I think! Let me know.
Larry

91camarosRS

iTrader: (5)

...... And I JUST. Pulled my axle to the junk yard

l_dis_travlr

White89:

If you still need this, PM me, I might be able to help.
It its what you need, I can do it for little-to-nothing,
plus whatever shipping will be from 77573 (Houston TX)

kk