fuel injected to carb

Reply Subscribe

Thread Tools

Search this Thread

07-13-2012, 02:12 PM

pbuzick88

Junior Member

Thread Starter

Join Date: Jun 2012

Location: glencoe, ok

Posts: 8

Likes: 0

Received 0 Likes on 0 Posts

Car: 1984 z28

Engine: 305 for now

Transmission: 700r4

fuel injected to carb

Hey guys I have a 1984 camaro that I am changing over to carburated and I am gonna use as a track car and occasionally a cruise down the road. I am wanting to remove all the wireing that was there from the fuel injection and looking for some advice on how to do so or maybe a wireing diagram that shows what I can take out. And any other tips to clean up the engine compartment any advice is very appreciated thanks

Reply Like

07-13-2012, 02:19 PM

Tuned Performance

Sponsor

iTrader: (92)

Join Date: Dec 2004

Location: Mile High Country !!!

Posts: 15,458

Likes: 7

Received 669 Likes on 592 Posts

Car: 1967 Camaro, 91 z28

Engine: Lb9

Transmission: M20

Axle/Gears: J65 pbr on stock posi 10bolt

Re: fuel injected to carb

CFI

Reply Like

07-13-2012, 02:21 PM

Tuned Performance

Sponsor

iTrader: (92)

Join Date: Dec 2004

Location: Mile High Country !!!

Posts: 15,458

Likes: 7

Received 669 Likes on 592 Posts

Car: 1967 Camaro, 91 z28

Engine: Lb9

Transmission: M20

Axle/Gears: J65 pbr on stock posi 10bolt

Re: fuel injected to carb

if so here is the schematic

hth

Reply Like

07-13-2012, 02:26 PM

pbuzick88

Junior Member

Thread Starter

Join Date: Jun 2012

Location: glencoe, ok

Posts: 8

Likes: 0

Received 0 Likes on 0 Posts

Car: 1984 z28

Engine: 305 for now

Transmission: 700r4

Re: fuel injected to carb

Cfi?? I just wanna get to the bare minimum as far as wires and stuff go but not real sure what to remove

Reply Like

07-13-2012, 02:44 PM

Tuned Performance

Sponsor

iTrader: (92)

Join Date: Dec 2004

Location: Mile High Country !!!

Posts: 15,458

Likes: 7

Received 669 Likes on 592 Posts

Car: 1967 Camaro, 91 z28

Engine: Lb9

Transmission: M20

Axle/Gears: J65 pbr on stock posi 10bolt

Re: fuel injected to carb

cfi =Cross Fire Injection , If you are going to a carb you will need a fpr. all the fi wiring can go you will just be left with the charging system, starter wire and power wire to the distributor and tach wire if equipped.

Reply Like