Decided to do a bbc swap into '86 Camaro
#1
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Decided to do a bbc swap into '86 Camaro
I will finally do it. This car will be a weekend warrior with some racing at our 1/4 track. I just ordered me some hooker swap headers! This big block is coming out of a 74 corvette.
#2
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Cool. What are you doing to the engine? What are you doing for transmission/rear end?
#3
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
#5
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
#7
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Re: Decided to do a bbc swap into '86 Camaro
Yep less power than Ls1
Don't mind the valve covers.
Don't mind the valve covers.
Last edited by Big454blockchevy; 02-13-2013 at 09:13 PM.
Trending Topics
#9
Junior Member
Join Date: Feb 2013
Location: Garden Grove california
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 camaro convertible Iroc
Engine: Chevy 305 sbc
Transmission: Automatic
Axle/Gears: Stock gears no posi
Re: Decided to do a bbc swap into '86 Camaro
What rockers are you using
#10
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
#11
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Re: Decided to do a bbc swap into '86 Camaro
I received my hooker swap headers yesterday and noticed that they are different from the first 2226hkr I had purchased about 5 years ago . Went back to the jegs website and it says they have been improved and redesigned . We shall see if they are a better fit than the old header design .
Last edited by Big454blockchevy; 02-16-2013 at 10:54 AM.
#12
Moderator
Join Date: Jul 1999
Location: 51°N 114°W, 3500'
Posts: 17,120
Likes: 0
Received 123 Likes
on
104 Posts
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Re: Decided to do a bbc swap into '86 Camaro
Keep us informed. Maybe they finally listened to the consumers about how bad the design was. For how much they cost, they better fit better.
They're still only a street header. With 1-7/8" primaries and 3" collectors, they're going to be restrictive for high rpm or large cubic inches.
They're still only a street header. With 1-7/8" primaries and 3" collectors, they're going to be restrictive for high rpm or large cubic inches.
#13
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Re: Decided to do a bbc swap into '86 Camaro
I will report back with the fitment. I'm hoping they don't turn out to be to restrictive for my 498, I should not need to go much above 6k rpms . I'm going down in primary size as the ones for the corvette are 2" primaries and the same size collector.
#14
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Re: Decided to do a bbc swap into '86 Camaro
Drove the '74 vette for last time , atleast for a while. Started taking the engine out to put into the Camaro.
#15
Supreme Member
Join Date: May 2005
Location: Malvern, Arkansas
Posts: 1,044
Likes: 0
Received 3 Likes
on
3 Posts
Car: 90 IROC 2-92 Zs blk vert & prpl
Engine: stealth ram brodix track 1 ful port
Transmission: 700r4 4l80e
Axle/Gears: iroc 375 lokr 92 Z 277 pos vert 327
Re: Decided to do a bbc swap into '86 Camaro
I almost went BBC but built a 406 instead. I got a 454 block 2 sets of rect port heads and a ls6 steel crank. I also got a 4l80e and a ford 9 but still havent got the 4l80e installed yet. A BBC is still very competative even with the mighty LS series of engines out there. You can get over 800 cubic inches and they still make and develope heads for the old mark IV that way out flow any LS head.
#16
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Re: Decided to do a bbc swap into '86 Camaro
It's almost completely in .
#17
Member
Re: Decided to do a bbc swap into '86 Camaro
My only question, and a little off topic, is why take a stingray off the road and build a third gen. I mean I love my car but I'd love to have a vette to drive as well.
#18
Senior Member
Join Date: Aug 2009
Location: greenfield indiana
Posts: 913
Likes: 0
Received 2 Likes
on
2 Posts
Car: 86' IROC-Z....and 5 other 3rdgens
Engine: 383 hsr
Transmission: built 700r4
Axle/Gears: stock 3.23, 10bolt
Re: Decided to do a bbc swap into '86 Camaro
man you have some pretty cool cars in your sig. i too wondered why the 74 vette was loosing its engine to a camaro, but im guessing you have "better" plans for the vette
#19
Supreme Member
iTrader: (15)
Join Date: Oct 2003
Location: Charlestown, IN
Posts: 3,449
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1971 Camaro
Engine: 427
Transmission: TKO600
Axle/Gears: 3.73
Re: Decided to do a bbc swap into '86 Camaro
Look for some Ed Quay headers. They fit great. I sold mine on here a few years ago when the 440 (.060" over 427) came out of mine. Those hookers are a restricition on anything other than a stock bbc or a 396 imo.
#20
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Re: Decided to do a bbc swap into '86 Camaro
I plan to put a Lsx engine in the vette later on. Also the camaro is better suited for drag racing which is what this big block was built for. I plan to dyno tune the camaro and see how much it puts down with the swap headers.
#21
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
#22
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Re: Decided to do a bbc swap into '86 Camaro
Some crappy phone pics , will try and get some real pics later on.
Last edited by Big454blockchevy; 02-27-2013 at 10:44 PM.
#23
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Re: Decided to do a bbc swap into '86 Camaro
Almost to the point of starting the engine.
Hopefully I can get it running good again. This vid is when I had a solid roller w/a 680ish lift
Hopefully I can get it running good again. This vid is when I had a solid roller w/a 680ish lift
Last edited by Big454blockchevy; 03-04-2013 at 10:01 PM.
#24
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Re: Decided to do a bbc swap into '86 Camaro
A little update , the motor and tranny are in. A note for anyone doing a 12 bolt swap , the conversion u joint part#for a stock driveshaft and yoke for a 700r4 and a chevelle 12 bolt is neapco or duralst gold # 3-3130 .
#25
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Re: Decided to do a bbc swap into '86 Camaro
A sound clip of the motor running ( it's actually a phone video but the quality sucks) . The cam sounds tamed considering it's a 650ish lift hyd. roller . It's got a 4-7 swap comp. cam. I couldn't really hear any difference in exhaust note. http://s870.photobucket.com/user/big...dfdda.mp4.html
#26
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Re: Decided to do a bbc swap into '86 Camaro
A pic with the C5 corvette wheels.
#27
Member
Join Date: Jul 2005
Location: St. Croix Falls WI
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 firebird
Engine: a few
Transmission: th350
Axle/Gears: wondering this myself
Re: Decided to do a bbc swap into '86 Camaro
big motors sticking out of the hood are way cooler than regular looking ls sitting nicely in the engine bay imo.
im looking at dumping a big block in my car as well and i was wondering how satisfied you are with those headers? is it worth the price?
im looking at dumping a big block in my car as well and i was wondering how satisfied you are with those headers? is it worth the price?
#28
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Re: Decided to do a bbc swap into '86 Camaro
At this point I am satisfied especially how easy they went on (with the redesign) . I may change my opinion when I dyno it and I am in down in power.
#29
Moderator
Join Date: Jul 1999
Location: 51°N 114°W, 3500'
Posts: 17,120
Likes: 0
Received 123 Likes
on
104 Posts
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Re: Decided to do a bbc swap into '86 Camaro
#30
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Re: Decided to do a bbc swap into '86 Camaro
The camaro is up and running. Now moving on to paint, hopefully I do a good job at it. As you can see it needs it.
#31
Moderator
Join Date: Jul 1999
Location: 51°N 114°W, 3500'
Posts: 17,120
Likes: 0
Received 123 Likes
on
104 Posts
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Re: Decided to do a bbc swap into '86 Camaro
Paint is only for show. It does nothing for performance. If you make it look like it should go fast, it better go fast.
#32
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
#33
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Re: Decided to do a bbc swap into '86 Camaro
I've got my power steering running now. It was a chore to turn without it on the street and having a spool .
http://s870.photobucket.com/user/big...3698e.mp4.html
http://s870.photobucket.com/user/big...3698e.mp4.html
#35
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
#36
Junior Member
Join Date: Apr 2013
Location: Elizabeth City, NC
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Pontiac Firebird Formula
Engine: 383
Transmission: TH-350
Axle/Gears: 3.42
Re: Decided to do a bbc swap into '86 Camaro
Did you have to change the motor mounts?
#37
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Admittedly off-topic and non-tech, but curious if you are in western Texas, or in West, Texas.
#39
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Re: Decided to do a bbc swap into '86 Camaro
#40
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Thread
Thread Starter
Forum
Replies
Last Post