dynomax headers
#1
Member
Thread Starter
Join Date: Feb 2003
Location: Denison and Ames, Iowa
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Formula 350
Engine: 5.7
Transmission: 700R4
dynomax headers
does anybody know if dynomax has a y pipe for their shorty headers with the 2.5 in collectors and 1.5 primaries..thanks
#2
Member
Thread Starter
Join Date: Feb 2003
Location: Denison and Ames, Iowa
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Formula 350
Engine: 5.7
Transmission: 700R4
i guess im not completely sure if these are the headers i have... so do all the dynomax headers liek mentioned before have the AIR provisions if so Im sure I have the flowtech ones...thanks
#3
Supreme Member
Join Date: Apr 2001
Location: USA
Posts: 4,969
Likes: 0
Received 0 Likes
on
0 Posts
Car: yy wife, crazy.
Engine: 350, Vortecs, 650DP
Transmission: TH-350
Axle/Gears: 8.5", 3.42
If you don't know what you have, there's really no way to tell.
Dynomax makes both. One with AIR tubes and one without.
It used to be that you could find "Walker" or "Blackjack" on the flange that bolted to the heads, but I don't know if they do that anymore.
Try looking for any numbers anywhere, then call or email both Dynomax and Flowtech (aka Holley) and see if they know what they are.
Other than that, you could have a y-pipe made. Just use the Flowmaster y-collector and have your local exhaust shop weld pipes off the headers to it.
http://www.jegs.com/cgi-bin/ncommerc...14&prmenbr=361
Dynomax makes both. One with AIR tubes and one without.
It used to be that you could find "Walker" or "Blackjack" on the flange that bolted to the heads, but I don't know if they do that anymore.
Try looking for any numbers anywhere, then call or email both Dynomax and Flowtech (aka Holley) and see if they know what they are.
Other than that, you could have a y-pipe made. Just use the Flowmaster y-collector and have your local exhaust shop weld pipes off the headers to it.
http://www.jegs.com/cgi-bin/ncommerc...14&prmenbr=361
#4
Member
Join Date: May 2001
Location: Westminster, Ma Blairsville PA (Wyotech)
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 IROC - 86 Trans Am
Engine: L98 Carbed - 350 Carbed and boosted
Transmission: auto - T5
i have the non-airtube shorty dynomax headers goin onto my TA, so i can just use a summit y-pipe right?
#5
Supreme Member
Join Date: Apr 2001
Location: USA
Posts: 4,969
Likes: 0
Received 0 Likes
on
0 Posts
Car: yy wife, crazy.
Engine: 350, Vortecs, 650DP
Transmission: TH-350
Axle/Gears: 8.5", 3.42
Originally posted by 86transamws6
i have the non-airtube shorty dynomax headers goin onto my TA, so i can just use a summit y-pipe right?
i have the non-airtube shorty dynomax headers goin onto my TA, so i can just use a summit y-pipe right?
I used to sell flooring (carpet, wood, ceramic, etc.) for a place called Carpet Weaver's. We had "Carpet Weaver's" carpet, but it was just Aladdin carpet with our name on it.
Because we bought it in bulk (or promised to buy X amount per year) we got it cheap and could sell it cheap. That's all Summit does.
Thread
Thread Starter
Forum
Replies
Last Post
redformula88
Engine/Drivetrain/Suspension Parts for Sale
2
10-14-2015 06:08 PM