z28yourstang

iTrader: (1)

Just looking around and noticed Holley makes some new products for our cars including a pretty slick dual exhaust setup and LS swap headers.
https://www.holley.com/products/exhaust/hooker_blackheart_late_model_exhaust/3rd_gen_camaro_and_firebird_1982-92/

crazynights

iTrader: (3)

It's great that companies seem to be doing more for the third gens. However, I notice now most are favoring the LS swappers. I truly dig the LS idea, but some of us still have standard blocks, transmissions, etc and would like it if more products were available to all.

z28yourstang

iTrader: (1)

Yea I totally agree with you. It would be nice if they made one of those dual exhaust setups for bolting to their 2210 long tube headers for the SBC.

QuickStyle

$720 for the cheapest dual exhaust they have. an exhaust shop can bend it and install it for less than that, and you dont have to do any of the work.

mjdavis68

iTrader: (1)

An exhaust shop isn't going to make bends like unless it has the latest in bending machines nor weld it up as good.

QuickStyle

mine did. dual mandrel exhaust all the way out back with great bends and and great welds. had it done about 8 years ago and still holds up just like new. you just gotta go to a shop with a mandrel bending machine, which i dont think is uncommon, it cost like 20% more than press bent.

Thirdgen89GTA

iTrader: (5)

Most shops can't do mandrel bends. And those that can usually charge enough they buying. Prebent system is cheaper.

QuickStyle

im not sure what its like where everyone else is from, but here locally i paid like $600 installed, dual mandrel bent over the axle. just my experience.

z28yourstang

iTrader: (1)

Yea idk if any exhaust shops in MS have a mandrel pipe bender.