turn signal housings and other misc. things
10-14-2014, 10:07 PM
#1
Member
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Location: Howard County, MD
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: Warmed over 350 TPI
Transmission: 700r4 soon to be t56
turn signal housings and other misc. things
Looking for a set of turn signal housings for a Trans Am GTA. I need both river and passenger sides, and with all mounting tabs intact. I'm not too worried about color, as I'll be repainting them anyways. Any set from 85-92 should fit, not sure about 82-84, but I think they're all the same. Also need the mounting hardware (4 screws) for them.
Looking for two front gold GTA wheels, no dimples ('87 only).
Looking for some hardware, if you have a part car, you could pull it off them. Need TPI valve cover bolts, and some interior screws.
Need a black hatch interior trim panel. Needs to have a slot for the third brake light switch.
Also looking for C&C t-top outer metal trim strips (see pic). The ones on my car have the coating scratched off in places, and the inner felt is ripped. I'd also like to get the front plastic trim pieces.
I have a bunch of leftover tan interior parts if anyone wants to trade. GTA door panels (pretty worn), sail panel covers, sun visors, some plastic panels.
Looking for two front gold GTA wheels, no dimples ('87 only).
Looking for some hardware, if you have a part car, you could pull it off them. Need TPI valve cover bolts, and some interior screws.
Need a black hatch interior trim panel. Needs to have a slot for the third brake light switch.
Also looking for C&C t-top outer metal trim strips (see pic). The ones on my car have the coating scratched off in places, and the inner felt is ripped. I'd also like to get the front plastic trim pieces.
I have a bunch of leftover tan interior parts if anyone wants to trade. GTA door panels (pretty worn), sail panel covers, sun visors, some plastic panels.
Last edited by transaero; 10-15-2014 at 10:33 AM.
10-15-2014, 12:00 PM
#2
Supreme Member
iTrader: (5)
Join Date: Nov 2010
Location: Mantua NJ
Posts: 5,827
Received 64 Likes
on
57 Posts
Car: 1 Owner 1986 TA with a WS6 package
Engine: 5.0 EFI
Transmission: THM700R4
Axle/Gears: 277 Posi Speedo
Re: turn signal housings and other misc. things
I have a nice set of turn signal housings,don't think I have the mounting screws,I'll check.
PM me if interested.
PM me if interested.
10-16-2014, 03:16 AM
#3
Member
iTrader: (1)
Join Date: Aug 2009
Location: Cudahy, WI
Posts: 131
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1984 Trans Am- L69, WS6, J65, W62
Engine: 350 .020 over
Transmission: auto 700R4
Axle/Gears: 4.11 Limited Slip
Re: turn signal housings and other misc. things
i have a set of turn signal housings (no cracks, tabs are good) with the four screws
a set of tpi valve cover bolts (center bolts)
let me know what interior screws you are looking for and quantity of each type and ill get you a total price
a set of tpi valve cover bolts (center bolts)
let me know what interior screws you are looking for and quantity of each type and ill get you a total price
10-18-2014, 09:18 PM
#4
Junior Member
iTrader: (2)
Join Date: Dec 2011
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: Too many!
Re: turn signal housings and other misc. things
Have a set of white turn signals w/ screws. Also have a few parts cars so I can get most interior hardware. PM me if you are interested. Thanks!
Thread
Thread Starter
Forum
Replies
Last Post