Group PurchasesTake part in, suggest, or discuss Group Purchases here. Make sure to read the rules before doing so.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have had a Hawks High rise Spoiler for almost a year now - Love it. Because the pieces are solid I was able to cut off the left and right drops even with the bottom of the tail lights. At the same time I also tapered the drops down to almost nothing so they wouldn't look so bulky there.
When I bought mine, they were having a sale on them - so I got it for $75.00. It may be that they are slow sellers, so a group purchase would go over quite nicely, in my opinion.
The above is just my opinion only, and not based on any outside information.
Ed. (AKA: Cocacolakidd)
__________________ ~Mighty Mouse~
Bless the lowered, and pass the Nitromethane -
There is a substitution for cubic inches, and that is cubic inches and boost.
Pedal to the metal until you see the "Gates of Hell", then brake.
I have had a Hawks High rise Spoiler for almost a year now - Love it. Because the pieces are solid I was able to cut off the left and right drops even with the bottom of the tail lights. At the same time I also tapered the drops down to almost nothing so they wouldn't look so bulky there.
When I bought mine, they were having a sale on them - so I got it for $75.00. It may be that they are slow sellers, so a group purchase would go over quite nicely, in my opinion.
The above is just my opinion only, and not based on any outside information.
Ed. (AKA: Cocacolakidd)
You got the whole spoiler for $75???
In any event, depending on pricing, I may be interested.
Yes it cost me just over $100.00 including shipping. They were having a sale on two of them (Only two at that time - ??). This sale was early last Summer. I do not think they were seconds because they looked perfect, and fit like a glove - easy install even with modding the drops. ~Ed~
__________________ ~Mighty Mouse~
Bless the lowered, and pass the Nitromethane -
There is a substitution for cubic inches, and that is cubic inches and boost.
Pedal to the metal until you see the "Gates of Hell", then brake.
road&track magazine October 1986 To sit in the Camaro and look out past the purposeful dash, over one of the most sensuously curved hoods in existence, is a treat
1990 Firebird Formula Procharged :350 in the works:
2006 GSX1300R Hayabusa Limited
2007 GSX-R600 :Trackbike:
since there seems to be many people interested in this I have emailed hawks reguarding the gp and asked them if they were interested and what the ammount would have to be I also asked if they would consider combining hoods into the gp
GP on 5" spoiler and hoods from Hawks Third Gen Parts
I contacted Bruce at Hawks Third Gen Parts It sounds like we can get a discount but he need to know how many are "SERIOUSLY" interested . If you are post here. I did ask if we could combine hoods as part of the GP so if your looking for a replacement hood just post here with what parts your after and I'll see what I can do
Same as above, if the price is good I am in. I have wanted it for a while but did not want shell out there asking price of the spoiler.
What style of hood is being added to the gp ?
ive been ready to buy it for a while now, whats the price? lets get the ball rolling.
dont have set price yet normal is 299.99 he said to just let him know how many people and he will give a price i think a price range would work better in our favor though ie getting more people involved if they knew what they would be paying :-( he just said to let him know how many and he would give a price so far 7 ppl
I emailed Bruce again this morning with the list of 11 people from NTTGA.NET AND THIRDGEN.ORG telling him whom was in and also let him know that price is a factor on some of the decisions so if he could give us some prices considering we have 11 in the pot now. I also stated considering we all know what they were when they first came out considerably less then they sell for now :-P
I have had a Hawks High rise Spoiler for almost a year now - Love it. Because the pieces are solid I was able to cut off the left and right drops even with the bottom of the tail lights. At the same time I also tapered the drops down to almost nothing so they wouldn't look so bulky there.
When I bought mine, they were having a sale on them - so I got it for $75.00. It may be that they are slow sellers, so a group purchase would go over quite nicely, in my opinion.
The above is just my opinion only, and not based on any outside information.
Ed. (AKA: Cocacolakidd)
But we all know about supply and demand and how prices go up look at gas.
Just got a reply from Bruce Somehow I don't see this being as low as they go but he is right the regular price is 350 and they are on sale for 299 so its 75 off regular price.
Hi<
I am looking at my cost and about 275.00 is the best I can do right now As gasd prices rise so do fiberglass material prices hope this helps you guys keep in mind it is on sale at a 50.00 savings so that is a total savings of 75.00
Bruce Hawkins
You would think a guy in a professional position as his would make sure things are spelt right and proof read haha ;-P wtf is gasd aka gas
So I'm going to need to know how many people are serious about this yet looking at may to purchase as I don't currently have the funds myself anymore since he was taking a while to get back to me it went elsewhere.
$299 US, I'm out. If the time comes when I really want one, I'll buck up and pay for it. If it was going to be two hundred or under I would've ordered one for sure.
__________________
- Chris -
Check my vBGarage for Mods - currently updating, check it out and leave a comment!
I think he was saying $275. Still, I know his material costs can not be more than 100 per. Espescially since the molds are obviously already made, and when buying in bulk just like a gp is a bulk buy, you get discounted price. Keep in mind that this price isn't with shipping included either! If I had the molds I could go buy fiberglass sheeting and resin and make it for less than fifty bucks!
No offense, cause hawks always seems to have high quality, but their prices always seem a little high. I know it's a buisness but that seems a little rediculous considering all the people saying they are interested. Even if total cost on his part is $150 at $275 he's still looking at $125 profit each. If you had 20 people at that price, he'd be looking at $2500 profit!
yea i know what you ment the price break isn't worth a sh*t well i think I had up to 16 ppl interested in it but apparently the gp is going to be a flop even if he didn't make that much off them a sale of 16 is better then a sale of none but his loss i suppose
. It's just hard to believe that a $300 spoiler was on sale for $75. It's even harder for me to believe that I never heard about it. 
If the price is right, I'm ready to buy. 
