[IN] parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
06-24-2010, 09:32 PM
#1
parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
parting out complete and running '84 Z28. everything is for sale some of the key items are below. Car has charcoal interior
good console lid $50
good upper and lower console parts $50 for the whole thing
original Z28 rims, no curb rash nice shape $100
Good charcoal door panels $75 for the pair
good black armrests $50
Good charcoal interior plastics with carpet, make offer.
Good charcoal front and rear seats. front seats have cigarette burns in middle, bolsters are good. $75 for everything.
Zillions of other parts from this car, just ask or PM me. Pics to come
good console lid $50
good upper and lower console parts $50 for the whole thing
original Z28 rims, no curb rash nice shape $100
Good charcoal door panels $75 for the pair
good black armrests $50
Good charcoal interior plastics with carpet, make offer.
Good charcoal front and rear seats. front seats have cigarette burns in middle, bolsters are good. $75 for everything.
Zillions of other parts from this car, just ask or PM me. Pics to come
Last edited by 1MeanZ; 07-22-2010 at 10:29 AM.
06-24-2010, 09:35 PM
#2
Senior Member
iTrader: (4)
Join Date: Apr 2008
Location: Crawfordsville, IN
Posts: 676
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Camaro 'Vert
Engine: 350
Transmission: 700R4
Re: parting out complete 84 Z28
I need a good driver's fender, an 82-84 Z28 bumper and possibly a Z28 hood. Can I get pics and prices on those parts, if still good? Thanks!
06-25-2010, 07:23 AM
#3
Re: parting out complete 84 Z28
Driver's fender has a small dent near the wheel opening. it's not a real sharp crease, a body man could work it out I'm almost positive. Passenger fender is in real nice shape. The nose, front air dam, and rear bumper look good in pix but have small cracks in them. I'd sell them dirt cheap if someone thinks they can fix them. The end of the hood is rusted off and not worth saving. The interior is charcoal in color and I have the whole thing. The pix were taken after 92RS(real slow) and i started taking it apart.
Also for sale is a nearly complete T-top overhead console with mounting screws
good tail lights
I'll get pix of this stuff up as I take them. I'm still working on dissassembling the car and organizing the parts.
Last edited by 1MeanZ; 06-25-2010 at 07:28 AM.
06-25-2010, 08:36 AM
#4
Senior Member
iTrader: (4)
Join Date: Apr 2008
Location: Crawfordsville, IN
Posts: 676
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Camaro 'Vert
Engine: 350
Transmission: 700R4
Re: parting out complete 84 Z28
Still interested in complete front bumper. Have any close ups of the cracks? Depending on where you are in Indiana, I can probably pick up.
06-26-2010, 02:10 AM
#5
Senior Member
iTrader: (2)
Join Date: Oct 2001
Location: Sedalia, MO
Posts: 646
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Z28 vert, 1988 GTA
Engine: 305 TPI, 305 Carb-finally runs!
Transmission: TH-700R4/BW WC T-5
Axle/Gears: 3.73 posi 4th gen 10-bolt/BW 9 bolt
Re: parting out complete 84 Z28
what does the dash emblem say, i can see it in the pics but cant make out if it says anything under the Z28
06-26-2010, 08:55 AM
#6
Member
iTrader: (12)
Join Date: Sep 2009
Location: Norwalk, CA
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Z-28
Engine: 5.7 L
Transmission: T-5
Re: parting out complete 84 Z28
hows the chin spoiler?...wats the condition on it?...wats the condition on the rear gfx?...if good how much shipped to 90650?...
06-26-2010, 10:54 AM
#7
Supreme Member
iTrader: (6)
Join Date: Dec 2008
Location: Norwalk, CA
Posts: 2,540
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91Z28
Engine: 5.7 ls1
Transmission: 4l60e
Axle/Gears: 3.42
Re: parting out complete 84 Z28
How much for the console lid shipped to 90650 and can you tame some pics of it please
Trending Topics
06-27-2010, 08:50 AM
#8
Re: parting out complete 84 Z28
I'll get pix, of the lid, no scratches or cracks, the button is still there and works, the curved hinge part is loose. The inside plastic liner unscrews and I haven't taken it off to see why it's loose. I'm asking $50 for the lid and shipping to you will be $16
06-30-2010, 11:21 AM
#10
Re: parting out complete 84 Z28
OK Gentlemen. First off, thanks for being patient here. My weekend got crazy and work has been busy as well and I have not had time to get pix until today.
Here are pix of the console lid. I have not cleaned it yet and the pivot arm is loose, but the button is present, unbroken and works.
Here are pix of the side ground effects. THey are in great shape, all studs are present and corners not broken off. The one rocker piece is cracked but not broken. These fiberglass pieces are an easy fix...
Here are pix of the rear bumper cover. It has been bumped in each corner but not horribly damaged. I'm trying to point to the one minor tear in it. People say they can fix this stuff and this is about as minor as it gets.
Here are pix of the console lid. I have not cleaned it yet and the pivot arm is loose, but the button is present, unbroken and works.
Here are pix of the side ground effects. THey are in great shape, all studs are present and corners not broken off. The one rocker piece is cracked but not broken. These fiberglass pieces are an easy fix...
Here are pix of the rear bumper cover. It has been bumped in each corner but not horribly damaged. I'm trying to point to the one minor tear in it. People say they can fix this stuff and this is about as minor as it gets.
06-30-2010, 11:21 AM
#11
Re: parting out complete 84 Z28
Both fenders are decent. The passenger is really nice, drivers has surface rust and a small dent.
The nose has not been hit, but is aged and has some minor cracks. One crack and one scuff in the nose, one crack in the front spoiler.
The nose has not been hit, but is aged and has some minor cracks. One crack and one scuff in the nose, one crack in the front spoiler.
07-03-2010, 12:33 AM
#12
Senior Member
iTrader: (15)
Join Date: Jan 2009
Location: Ogden UT
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 Camaro (Gone...)
Re: parting out complete 84 Z28
P.M. sent a lilttle while ago, I'm still very interested in the interior plastics, not the carpet anymore though.
07-03-2010, 09:46 AM
#14
Junior Member
Join Date: Mar 2009
Location: Conroe, Tx
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Engine: 350 TPI
Transmission: AUTO
Re: parting out complete 84 Z28
parting out complete and running '84 Z28. everything is for sale some of the key items are below. Car has charcoal interior
great uncracked dash pad $100 OBO
good console lid $50
good upper and lower console parts $50 for the whole thing
original Z28 rims, no curb rash nice shape $100
Good charcoal door panels $75 for the pair
good black armrests $50
Good charcoal interior plastics with carpet, make offer.
Good charcoal front and rear seats. front seats have cigarette burns in middle, bolsters are good. $100 for everything.
Zillions of other parts from this car, just ask or PM me. Pics to come
great uncracked dash pad $100 OBO
good console lid $50
good upper and lower console parts $50 for the whole thing
original Z28 rims, no curb rash nice shape $100
Good charcoal door panels $75 for the pair
good black armrests $50
Good charcoal interior plastics with carpet, make offer.
Good charcoal front and rear seats. front seats have cigarette burns in middle, bolsters are good. $100 for everything.
Zillions of other parts from this car, just ask or PM me. Pics to come
07-07-2010, 08:24 AM
#18
Re: parting out complete 84 Z28
pix of more parts for sale.
front fog lights in great condition. $25
Door panels are in great shape overall. They do have some warp and the window sweeps are in rough shape but the door panels themselves and the plastic top pieces are in good shape too. Both door panels for $70
roll away rear compartment shade. Black in good shape still and works. $50
front fog lights in great condition. $25
Door panels are in great shape overall. They do have some warp and the window sweeps are in rough shape but the door panels themselves and the plastic top pieces are in good shape too. Both door panels for $70
roll away rear compartment shade. Black in good shape still and works. $50
07-07-2010, 08:32 AM
#19
Re: parting out complete 84 Z28
complete console. Console base is charcoal. All parts are great, let me know what you need. Leather wrapped e-brake lever is great, shift **** is OK but not perfect.
Great pair of black early amrrests, perfect shape. $50
Overhead console in fantastic shape but missing a few pieces. Dome light cover missing, swivel light missing, and flashlight gone. Leather is good, mileage counters unscratched, INCLUDES screws, hardware and wiring. $50
charcoal seat belt loops $10
Great pair of black early amrrests, perfect shape. $50
Overhead console in fantastic shape but missing a few pieces. Dome light cover missing, swivel light missing, and flashlight gone. Leather is good, mileage counters unscratched, INCLUDES screws, hardware and wiring. $50
charcoal seat belt loops $10
07-07-2010, 08:42 AM
#20
Re: parting out complete 84 Z28
charcoal speaker covers. Decent shape, 2 small scuffs shown. $10
charcoal carpet covered side panels and rear panel. Driver's side piece is cracked where hatch strut mounts. Could be repaired with some epoxy or fiberglass. $75 for all 3 pieces
charcoal carpet covered side panels and rear panel. Driver's side piece is cracked where hatch strut mounts. Could be repaired with some epoxy or fiberglass. $75 for all 3 pieces
07-12-2010, 06:11 PM
#23
Junior Member
iTrader: (2)
Join Date: Jun 2010
Location: Queens, NY
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Chevrolet Camaro
Engine: 2.8L V6 soon to be 3.4
Transmission: 700R4 soon to be WC t5
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
Hey can you take some in detail pics of the dash pad please? 
07-15-2010, 08:03 AM
#26
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
Yes I do. It wasn't working when I drove the car, then when I pulled the distributor out I saw that someone had put a new cap on and didnt plug the tach lead in. So I'm 99% sure it will work, it just wasnt plugged in for me to verify that.
$10 plus shipping.
$10 plus shipping.
07-15-2010, 07:54 PM
#27
Junior Member
Join Date: Jan 2010
Location: Philadelphia, PA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Engine: LO5
Transmission: 4L60
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
I'll take it. PM'd
07-16-2010, 07:27 PM
#29
Junior Member
iTrader: (1)
Join Date: Mar 2010
Location: charlotte
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 z-28
Engine: 383
Transmission: 6 speed
Axle/Gears: 373 posi
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
do you still have the carpet and door covers
07-16-2010, 08:31 PM
#31
Junior Member
iTrader: (1)
Join Date: Mar 2010
Location: charlotte
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 z-28
Engine: 383
Transmission: 6 speed
Axle/Gears: 373 posi
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
what kind of deal can i get on both with the speaker covers
07-17-2010, 12:49 PM
#33
Junior Member
iTrader: (1)
Join Date: Jun 2010
Location: New Hampshire
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28 Camaro
Engine: LG4 (H code) 305
Transmission: T5
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
Hello, I am interested in the complete speedo cluter to include all gauges and tach. Also is there any damage to the speedo cluster and what do you want for it. Thanks. You can email me at zxskidoo@yahoo.com Please enclose in email several pictures of the speedo cluster. Thanks again
07-17-2010, 02:57 PM
#34
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
Hello, I am interested in the complete speedo cluter to include all gauges and tach. Also is there any damage to the speedo cluster and what do you want for it. Thanks. You can email me at zxskidoo@yahoo.com Please enclose in email several pictures of the speedo cluster. Thanks again
07-18-2010, 06:02 AM
#35
Junior Member
iTrader: (1)
Join Date: Jun 2010
Location: New Hampshire
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28 Camaro
Engine: LG4 (H code) 305
Transmission: T5
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
I am still waiting on those detailed pictures of the speedo cluster, minus the tach. again I will need pictures of all mounting holes, circut board, speedo,face plate. You can send pictures to zxskidoo@yahoo.com to bad you sold the tach only. You should never split up a complete cluster on these cars.
07-18-2010, 05:07 PM
#36
2011 Norwood Gathering
ThirdGen Camaro Rep
ThirdGen Camaro Rep
iTrader: (5)
Join Date: Mar 2008
Location: MICH.
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC
Engine: 5.7
Transmission: 700R4
Axle/Gears: 9 bolt 2:77
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
What motor is in it. LG4?
07-19-2010, 07:56 AM
#37
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
I am still waiting on those detailed pictures of the speedo cluster, minus the tach. again I will need pictures of all mounting holes, circut board, speedo,face plate. You can send pictures to zxskidoo@yahoo.com to bad you sold the tach only. You should never split up a complete cluster on these cars.
Yes the engine is the LG4. All stock with an edelbrock carb. It ran pretty good actually. I took a video of it.
07-19-2010, 12:14 PM
#38
2011 Norwood Gathering
ThirdGen Camaro Rep
ThirdGen Camaro Rep
iTrader: (5)
Join Date: Mar 2008
Location: MICH.
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC
Engine: 5.7
Transmission: 700R4
Axle/Gears: 9 bolt 2:77
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
I would be interested in the following.
*exhaust manifolds with the a.i.r. tubes, check valves,crossover hose and heatstove
*diverter valve (i think thats what it's called) and mounting bracket and any hoses.
*black silencer and any mounting brackets and hoses.
let me know pay pal ready.
*exhaust manifolds with the a.i.r. tubes, check valves,crossover hose and heatstove
*diverter valve (i think thats what it's called) and mounting bracket and any hoses.
*black silencer and any mounting brackets and hoses.
let me know pay pal ready.
07-19-2010, 01:27 PM
#39
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
I would be interested in the following.
*exhaust manifolds with the a.i.r. tubes, check valves,crossover hose and heatstove
*diverter valve (i think thats what it's called) and mounting bracket and any hoses.
*black silencer and any mounting brackets and hoses.
let me know pay pal ready.
*exhaust manifolds with the a.i.r. tubes, check valves,crossover hose and heatstove
*diverter valve (i think thats what it's called) and mounting bracket and any hoses.
*black silencer and any mounting brackets and hoses.
let me know pay pal ready.
07-20-2010, 12:58 AM
#40
Junior Member
Join Date: Apr 2010
Location: Abilene TX
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Z28
Engine: 305 TPI
Transmission: 700R4
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
Nobody's called dibs on the dash pad? I'd love to see pics of it.
Also, what does the dash itself look like? I don't care too much about the smaller pieces. The one in my camaro has cracks running every-which way, and there are pieces of it missing.
Also, what does the dash itself look like? I don't care too much about the smaller pieces. The one in my camaro has cracks running every-which way, and there are pieces of it missing.
07-22-2010, 10:27 AM
#42
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
I just did actually. I just noticed this morning that my dash is starting to warp around the screw holes in the defroster vent, so I'm keeping this one to replace the one in my IROC.
I have everything you listed except the dome light lens. This car had a nice overhead console(which is pictured and still for sale) and the lens was missing.
As a matter of fact, I have not sold one piece of this car yet! I've had tons of tire kickers but no one ever comes through with the money. I'm trying to get good pix of this stuff so people can see it. Make me offers on this stuff guys I'm ready to get rid of it!
As a matter of fact, I have not sold one piece of this car yet! I've had tons of tire kickers but no one ever comes through with the money. I'm trying to get good pix of this stuff so people can see it. Make me offers on this stuff guys I'm ready to get rid of it!
07-27-2010, 09:45 AM
#43
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
sorry i have been on vacation
i am still interested in some of your parts but would like to see them in person
i live in indy can come up this week if you let me know where you live
i am still interested in some of your parts but would like to see them in person
i live in indy can come up this week if you let me know where you live
07-31-2010, 11:30 PM
#44
Junior Member
Join Date: Jul 2010
Location: winamac,IN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 formula firebird T-top
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: thinking 2.73
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
now i know this is a pain in the azz but i am in need of floor pans. are yours good? Im in NW Indiana
07-31-2010, 11:33 PM
#45
Junior Member
Join Date: Jul 2010
Location: winamac,IN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 formula firebird T-top
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: thinking 2.73
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
ok just seen the post were you said nothing has been sold... what u want for the car... would rather just have the floor pans but amuse me...
08-04-2010, 10:15 AM
#47
Member
Join Date: Feb 2010
Location: rittman,ohio
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 camaro berlinetta (z28clone)
Engine: gmpp 350,edelbrock,msd,k&n
Transmission: stage 2 maddog 700r4
Axle/Gears: motive gear 4.10/ eaton posi
Re: parting out 84 Z28 PIX INSIDE LOTS OF STUFF STILL AVAILABLE!!!!
do you still have rear ashtray in console...how much shipped to my door 44270