Parting out TTA #677
#1
Member
Thread Starter
Join Date: Sep 2001
Location: Vancouver, B,C, Canada
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Parting out TTA #677
Hey guys,
Well ive finally come around to the decision that im not going to be building my tta clone, i just dont have the time or need to take on another project for myself right now. So im puttin everything up for sale either as a project if someone wants to take it all or going to part it out which im sure wont be a problem selling the parts. i bought the original tta a couple years back, actually found it on this site, and its car number 677. I disassembled the car when i first got it up here so its already part. i have a bill of sale and receipts for almost everything the previous owner had installed. I also have a 1991 GTA roller with a clean title that i bought for the swap. If your looking for certain parts or want to buy the whole project contact me by pm or email. The car is listed locally and on other sites so if you first here to ask about a part doesnt mean your first on the list for the part but i will be fare with everyone. Also feel free to to shoot me offer's on these parts but if you low ball me dont expect a response back, i dont have the time to waste dealing with people that want something for nothing. Also im not up on the current market value of each individual part here so bare with me as will have to do some homework to come up with prices that fair for both the buyer and seller.
That being said the car was 677 and was t boned on the passeger side. I accident was talked about on this site. Let me know what your looking for and ill let you know if its available and also send you some pics. Im on the fence about selling the long block as a might keep it as a spare for me GN. The interior is all in great shape with the exception of the pass door panel and pass rear seat/ trunk panel. The front pass side spindle was bent but if your interested in the brakes i have a new set of spindles. The car was very clean and ill list the mods it had that are available below.
Let me know what your looking for.
Dave
Ta88gta@shaw.ca
Speedo Cluster NOT AVAILABLE
Mint glass t tops $175
Interior:
Re-upholstered Leather seats front and back sold
interior panels and belts let me know what you need The pass side door panel and rear panel were damaged in accident can take photos if your interested
Carpet $80
T top head liner, redone still very clean maybe hard to ship. $100
TTA specific floor mats, they have the turbo fender badge logo on them. [COLOR="Red"]sold
T top shades very clean $60
nice shifter handle $25
Console $100
Caspers knock gauge SOLD
AuotMeter A/F ratio gauge SOLD
AutoMeter boost gauge p/n 5703 Buy all three guages and ill throw in the pillar pod SOLD
AutoMeter Phantom 5inch Monster Tach with shift light p/n 5899 $175
Ams 500 boost controller it pretty much new i used in it my gn for a weekend SOLD
i also have the owners kit and car badges but i have to verify that its all there and the condition of it all, as i havent looked at this stuff in a while.
If i havent listed what your looking for just ask, i dont have the shell anymore but i kept pretty much everything
Pictures aree posted here: http://s36.beta.photobucket.com/user...0turboTA%20677
Well ive finally come around to the decision that im not going to be building my tta clone, i just dont have the time or need to take on another project for myself right now. So im puttin everything up for sale either as a project if someone wants to take it all or going to part it out which im sure wont be a problem selling the parts. i bought the original tta a couple years back, actually found it on this site, and its car number 677. I disassembled the car when i first got it up here so its already part. i have a bill of sale and receipts for almost everything the previous owner had installed. I also have a 1991 GTA roller with a clean title that i bought for the swap. If your looking for certain parts or want to buy the whole project contact me by pm or email. The car is listed locally and on other sites so if you first here to ask about a part doesnt mean your first on the list for the part but i will be fare with everyone. Also feel free to to shoot me offer's on these parts but if you low ball me dont expect a response back, i dont have the time to waste dealing with people that want something for nothing. Also im not up on the current market value of each individual part here so bare with me as will have to do some homework to come up with prices that fair for both the buyer and seller.
That being said the car was 677 and was t boned on the passeger side. I accident was talked about on this site. Let me know what your looking for and ill let you know if its available and also send you some pics. Im on the fence about selling the long block as a might keep it as a spare for me GN. The interior is all in great shape with the exception of the pass door panel and pass rear seat/ trunk panel. The front pass side spindle was bent but if your interested in the brakes i have a new set of spindles. The car was very clean and ill list the mods it had that are available below.
Let me know what your looking for.
Dave
Ta88gta@shaw.ca
Speedo Cluster NOT AVAILABLE
Mint glass t tops $175
Interior:
Re-upholstered Leather seats front and back sold
interior panels and belts let me know what you need The pass side door panel and rear panel were damaged in accident can take photos if your interested
Carpet $80
T top head liner, redone still very clean maybe hard to ship. $100
TTA specific floor mats, they have the turbo fender badge logo on them. [COLOR="Red"]sold
T top shades very clean $60
nice shifter handle $25
Console $100
Caspers knock gauge SOLD
AuotMeter A/F ratio gauge SOLD
AutoMeter boost gauge p/n 5703 Buy all three guages and ill throw in the pillar pod SOLD
AutoMeter Phantom 5inch Monster Tach with shift light p/n 5899 $175
Ams 500 boost controller it pretty much new i used in it my gn for a weekend SOLD
i also have the owners kit and car badges but i have to verify that its all there and the condition of it all, as i havent looked at this stuff in a while.
If i havent listed what your looking for just ask, i dont have the shell anymore but i kept pretty much everything
Pictures aree posted here: http://s36.beta.photobucket.com/user...0turboTA%20677
Last edited by TA88GTA; 03-10-2013 at 04:13 PM.
#2
Senior Member
iTrader: (1)
Join Date: Feb 2012
Location: S.New Jersey
Posts: 709
Likes: 0
Received 1 Like
on
1 Post
Car: 89 GTA/90 Iroc Vert
Engine: 5.7/5.0L
Transmission: 700R4 x 2
Axle/Gears: 3.27/2.73
Re: Parting out TTA #677
Got a nice pair of these ? Selt belt boxes -no cracks /scars ..? Beechwood Tan
#5
Member
Thread Starter
Join Date: Sep 2001
Location: Vancouver, B,C, Canada
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out TTA #677
they are tan. Heres the pic, i had the rear speaker panel stacked on top so it put a dent in the fabric but it will come out.
Trending Topics
#8
Senior Member
iTrader: (1)
Join Date: Feb 2012
Location: S.New Jersey
Posts: 709
Likes: 0
Received 1 Like
on
1 Post
Car: 89 GTA/90 Iroc Vert
Engine: 5.7/5.0L
Transmission: 700R4 x 2
Axle/Gears: 3.27/2.73
Re: Parting out TTA #677
Since you are in BC - not much sun fade up there ...
How are the seat belts ? Need front and rears if beechwood.
How are the seat belts ? Need front and rears if beechwood.
#9
Supreme Member
Re: Parting out TTA #677
I had mine re-Upholstered..
Last edited by IMissMy86TA; 02-15-2013 at 11:08 AM.
#13
Member
Thread Starter
Join Date: Sep 2001
Location: Vancouver, B,C, Canada
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
#14
Member
Thread Starter
Join Date: Sep 2001
Location: Vancouver, B,C, Canada
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
#15
Member
Thread Starter
Join Date: Sep 2001
Location: Vancouver, B,C, Canada
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out TTA #677
i took tons of photos today check them all out over here:
http://s36.beta.photobucket.com/user...0turboTA%20677
http://s36.beta.photobucket.com/user...0turboTA%20677
#16
Senior Member
iTrader: (1)
Join Date: Feb 2012
Location: S.New Jersey
Posts: 709
Likes: 0
Received 1 Like
on
1 Post
Car: 89 GTA/90 Iroc Vert
Engine: 5.7/5.0L
Transmission: 700R4 x 2
Axle/Gears: 3.27/2.73
Re: Parting out TTA #677
Thanks -
I'll take the one belt box.
What do you want for it shipped to 08322 ?
I can do PPal ....
the belts ? I dont need the recievers, just pcs w/webbing - whole asemblies ..... You can sell the front/back reciever pcs separately to someone else for more $$ .... what do want for webbed pcs - or just price the whole smigigy....LMK
I'll take the one belt box.
What do you want for it shipped to 08322 ?
I can do PPal ....
the belts ? I dont need the recievers, just pcs w/webbing - whole asemblies ..... You can sell the front/back reciever pcs separately to someone else for more $$ .... what do want for webbed pcs - or just price the whole smigigy....LMK
Last edited by Jersey89GTA; 02-16-2013 at 09:33 AM.
#17
Want a title? Post!
Join Date: Jul 2008
Location: Punta Gorda FL. 33950
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Buick G.N. 11.67@118 89 Pontaic
Engine: L2 3.8 Vin 7 Turbo Both cars
Transmission: 2004R
Axle/Gears: 3.23
Re: Parting out TTA #677
A lot of great stuff, Would like a price for speedometer or the compleat inst. panel and for the frontmount intercooler for the TTA. Ihave pay pal aera code is 33950 My cell # 941 626 2967
Thanks Ed
Thanks Ed
#18
Member
Thread Starter
Join Date: Sep 2001
Location: Vancouver, B,C, Canada
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
#21
Supreme Member
iTrader: (2)
Join Date: Jul 2003
Location: allen,tx
Posts: 1,153
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Iroc-Z
Engine: 305
Transmission: t-5
Re: Parting out TTA #677
can i get a picture of the seats and do you know an inexpensive way to ship them to texas im interested send pictures to smokeum426@yahoo.com
#22
Member
Thread Starter
Join Date: Sep 2001
Location: Vancouver, B,C, Canada
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out TTA #677
pics here: http://s36.beta.photobucket.com/user...0turboTA%20677
as for shipping them, the last quote i got to send them on a pallet to NY was 350. These thing are heavy and take up alot of space its cheaper to send them on a pallet than to ship them individuallly. i would think it would cost between 300 and 350 to go to texas
as for shipping them, the last quote i got to send them on a pallet to NY was 350. These thing are heavy and take up alot of space its cheaper to send them on a pallet than to ship them individuallly. i would think it would cost between 300 and 350 to go to texas
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
11-14-2015 12:02 AM