08-30-2009, 08:51 PM
|
#1 |
| Member
Join Date: Jun 2003 Location: menasha wi
Posts: 239
Car: 87 TA Engine: 305 tpi Transmission: auto | window problems
Seems I opened a can of worms on my 87 ta with electric windows. I was going to try to adjust my drivers side window because it had alot of flop to it. Here is what I have found.
Problem #1 lower stop gone. FIXED with bike brake pad
Problem #2 upper stop broken(see pic). Anyone make a replacement or do I have to rumage thru the junk yard? Do I just drill out the rivet, replace and rerivet?
Problem #3 regulator and motor. This seems to be a couple problems in one.
First, the upper rivet hole is cracked(see pic), how can this be fixed?
Next, when the window reaches the stops it seems to want to push a little more. When it does this I can see the rivets move (rivet holes that hold on to the regulator elongated) and I can see the sheetmetal that the regulator connects to flexes. What is causing this to happen and how can I remedy this?
Thanks
KeithO | | |
__________________
87 TA
2 12" alpine type R's dual 4 ohm
memphis 1000d
ryjos customs box
memphis 4ch
dj sexy kicks
eclipse 5 1/4 componets
eclipse hu 5423
stinger dream rca's
soon to come:
jl 8" subs in the sails |
 
|  |
