[For Sale] SOLD
#2
Junior Member
iTrader: (2)
Join Date: Aug 2007
Location: Aiken SC
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Formula
Engine: l98
Transmission: 700r4
Axle/Gears: 3.27
Re: LS heads/cam kit $1750 shipped
I have a set of nicely ported LS1 heads, they flow over 300 sfm on the intake side and include .660" Brian Tooley Racing lift dual valve springs with titanium retainers. The casting number is 853.
The cam is a 230I/233E duration, .625I/.611E lift Bullet racing custom grind.
There is also a set of (8) 42lb injectors, the ideal size for the heads and cam.
New in the box ARP 234-4316 12pt head studs for 2003 and earlier LS blocks.
A texas Speed ported LS6 oil pump.
I carefully specced these parts out to give an honest 450rwhp with the supporting mods, I'm only selling them because I have decided to go with a blower setup instead.
All you'll need to complete this is gaskets, fluids, and time! I can even help with tuning if you want.
The cam is a 230I/233E duration, .625I/.611E lift Bullet racing custom grind.
There is also a set of (8) 42lb injectors, the ideal size for the heads and cam.
New in the box ARP 234-4316 12pt head studs for 2003 and earlier LS blocks.
A texas Speed ported LS6 oil pump.
I carefully specced these parts out to give an honest 450rwhp with the supporting mods, I'm only selling them because I have decided to go with a blower setup instead.
All you'll need to complete this is gaskets, fluids, and time! I can even help with tuning if you want.
#3
Member
Thread Starter
iTrader: (7)
Join Date: Jan 2007
Location: Northwest SC
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 RS
Engine: LT1
Transmission: T56
Axle/Gears: 3.42 LSD
Re: LS heads/cam kit $1750 shipped
Just have some questions for you about this set up and what supporting mods will get you to the 450 hp. I'm doing a ls swap and want to up the hp from the factory engine. My engine is out of a,2001 ws6 and already has the ls6 intake on it. I plan on adding long tube headers and want to do a head and cam swap. Any way call or respond thanks. Chris 803 220 7297.
Also once you get the heads assembled on the motor you'll have to measure the pushrod length and get those.
Thread
Thread Starter
Forum
Replies
Last Post
92rsvortec350
Engine/Drivetrain/Suspension Parts for Sale
19
10-09-2015 09:39 AM
Dragonsys
Engine/Drivetrain/Suspension Parts for Sale
2
09-25-2015 03:51 PM
Night rider327
Exterior Parts for Sale
0
09-25-2015 04:23 AM
pmacfadden
Camaros for Sale
0
09-17-2015 01:06 PM