xomega

iTrader: (1)

i was searching for a good cam for a lt1 thirdgen. "or my money pit should i say" i came across a old thread on another board where a guy was selling a comp cams cc306 230 / 244, .510 / .540. he claimed it made 357hp to the tires on stock heads. doesnt this sound a bit high for just a cam swap on a stock engine? he didnt say he had other mods...

Klortho

I was going to go with the 306 cam, but when I found out the power doesn't come on until like 3500rpm and pulls to 7k I backed away from it. Yes it sounds mean as hell at an idle but just not practical for street use. I started looking at the XFI series of cams that Comp makes and they are actually better than the 306.

KrisW

iTrader: (5)

What about the LT4 hot cam? Aren't the specs on that one good?

chevyowner02

iTrader: (3)

A 306 is a waste when not porting the heads IMHO. If you want a good cam get the cc503 or cc502. Thats about as big as you would want to go on stock heads without porting them. I have read on the Hot cam making 320rwhp. Good cam and can get by with out a stall if you wanted to with no cam surge. Bigger is not alwasy better.

xomega

iTrader: (1)

my wife tells me different:P

xomega

iTrader: (1)

on a 503 what other changes would have to be made? new springs? rocker arms?

Klortho

Any cam swap you would be best going with new springs, retainers and roller rockers (just to make the most power) possibly new pushrods.

You might want to look at the XFI line of cams, better idle (still lopey) and the XFI280 or 292, more lift with a 1.6 rocker more duration which brings the torque curve down alot on the engine.

xomega

iTrader: (1)

correct me if im wrong but it would require a 1.5 rocker arm right? what about springs?

Klortho

Alot swear on the beehive springs that comp makes and you can go with either a 1.5 or 1.6

check this link

http://www.compcams.com/Technical/Cu...og/Default.asp

and click on the GM LT1&LT4 will show you all the cams available for the LT1 and LT4

chevyowner02

iTrader: (3)

You can use the beehive or the crane 10308-1. If you want the most out of it use some good 1.6 roller rockers.