Camaro LT1 with Caprice wiring?
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jan 2005
Location: San Angelo, TX
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac firebird
Engine: '93 LT1
Transmission: Built 700R4
Axle/Gears: 3.70 9 bolt
Camaro LT1 with Caprice wiring?
i've never messed with a caprice before, so does anyone know if it would work?
a friend of mine is going to put an LT1 from a '95 camaro into a '61 Impala. the camaro caught fire and the wiring is gone, but he has a '94 caprice that he could use the wiring from if it will work.
1. are the connections the same on the 2 engines?
2. are the 2 ECM's interchangable?
3. what other problems would we run into?
thanks,
Jimmy
a friend of mine is going to put an LT1 from a '95 camaro into a '61 Impala. the camaro caught fire and the wiring is gone, but he has a '94 caprice that he could use the wiring from if it will work.
1. are the connections the same on the 2 engines?
2. are the 2 ECM's interchangable?
3. what other problems would we run into?
thanks,
Jimmy
#2
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
See if this answers your questions: https://www.thirdgen.org/forums/ltx-...g-dummies.html
(Linked from the LT1 swap sticky)
(Linked from the LT1 swap sticky)
#3
Re: Camaro LT1 with Caprice wiring?
I would use the Camaro PCM. 94 should only be slightly different on the wiring on the automatic transmission. May have to add one wire. It depends on what transmission is going in.
Unfortunately, I don't know much about Caprice LT1's. Maybe ask your question at www.ltxtech.com
Unfortunately, I don't know much about Caprice LT1's. Maybe ask your question at www.ltxtech.com
Thread
Thread Starter
Forum
Replies
Last Post