How do I identify what year my LT1 is?
02-06-2011, 03:41 PM
#1
Member
Thread Starter
iTrader: (2)
Join Date: Jul 2010
Location: Victoria, BC
Posts: 399
Likes: 0
Received 1 Like
on
1 Post
Car: 89 Firebird Formula
Engine: 3500T
Transmission: T56
Axle/Gears: 9 bolt/4.11
How do I identify what year my LT1 is?
I've looked up several numbers on the block and parts on the engine
(10125327, 12552138, 10214196, GM SGI E105)
and I've come up with this
The engine seems to be a 94-95 (and the timing cover # seems to agree), but some places seem to say that the intake (12552138) is from a 96+ engine. How can I narrow it down? And how can I tell if the distributor is vented or non-vented? The engine was rebuilt so it guess it could be using parts from different years.
Oh and is the ALDL port in the wiring harness or on the PCM? Because I can't seem to find it either place...
(10125327, 12552138, 10214196, GM SGI E105)
and I've come up with this
The engine seems to be a 94-95 (and the timing cover # seems to agree), but some places seem to say that the intake (12552138) is from a 96+ engine. How can I narrow it down? And how can I tell if the distributor is vented or non-vented? The engine was rebuilt so it guess it could be using parts from different years.
Oh and is the ALDL port in the wiring harness or on the PCM? Because I can't seem to find it either place...
02-06-2011, 06:13 PM
#2
Supreme Member
iTrader: (24)
Join Date: Jun 2005
Location: NC
Posts: 7,899
Likes: 0
Received 90 Likes
on
54 Posts
Car: 92 Firebird
Engine: Supercharged 6.0
Transmission: T56
Axle/Gears: 8.8 3.73
Re: How do I identify what year my LT1 is?
92-93 are easy to spot. The intake lacks a fuel line crossover up front and the TB has a TV cable stud
94-95 are the most common. Check the front cover near the bottom, it should be smooth
96-97 have a crank sensor on the bottom pass side of the front cover
If you want to get really picky, 92-94 have the old 2 connector coil just like older TPIs. 95-97 use a single connector coil also found in vortec trucks
Vented optis have a vacuum port on the bottom drivers side, non vented dont. Non vented use a short stubby connector, vented use a ridiculously long connector. Be careful unplugging it, 9/10 break the tab off
Then comes the common info:
Alum heads F/Y-body
Iron heads B-body
Drivers side accessories Y-body
Pass side accys F/B-body
If you got a basket case engine or the PO did, narrowing down what it originally came from will be difficult. The good news is nearly everything is interchangeable
94-95 are the most common. Check the front cover near the bottom, it should be smooth
96-97 have a crank sensor on the bottom pass side of the front cover
If you want to get really picky, 92-94 have the old 2 connector coil just like older TPIs. 95-97 use a single connector coil also found in vortec trucks
Vented optis have a vacuum port on the bottom drivers side, non vented dont. Non vented use a short stubby connector, vented use a ridiculously long connector. Be careful unplugging it, 9/10 break the tab off
Then comes the common info:
Alum heads F/Y-body
Iron heads B-body
Drivers side accessories Y-body
Pass side accys F/B-body
If you got a basket case engine or the PO did, narrowing down what it originally came from will be difficult. The good news is nearly everything is interchangeable
02-06-2011, 06:53 PM
#3
Supreme Member
Join Date: May 2004
Location: Kingston, Tn
Posts: 2,924
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 GTA
Engine: LT1
Transmission: T56
Axle/Gears: 9 bolt 3.70 posi
Re: How do I identify what year my LT1 is?
The '94 f-body had the spline mounted opti as well, the pinned for that year was on the Impy SS, the '95 f-body will have the pinned opti with the larger hole for it.
Thread
Thread Starter
Forum
Replies
Last Post
Linson
Auto Detailing and Appearance
40
08-21-2015 02:12 PM
